编辑 | blame | 历史 | 原始文档

设备远程监控接入说明

遥测数据上报

PLC 或边缘网关使用登录后的 Bearer Token 调用:

POST /environmentAccess/deviceMonitor/report

{
  "deviceLedgerId": 1,
  "temperature": 72.5,
  "pressure": 0.86,
  "vibration": 3.2,
  "energy": 12.6,
  "collectTime": "2026-11-03 10:30:00"
}

服务端会根据设备台账阈值判定 normal、warning 或 alarm,异常状态首次出现或升级时,通过 /environmentAccess/deviceMonitor/alarm-stream 实时推送给在线页面。

远程启停网关

在配置文件中增加统一控制网关地址;令牌建议从环境变量读取,不要直接写入版本库:

unattended:
  device-control:
    gateway-url: http://127.0.0.1:9000/api/device/control
    auth-token: ${DEVICE_CONTROL_TOKEN:}

系统向网关发送:

{
  "deviceId": 1,
  "deviceName": "空压机 1#",
  "action": "start",
  "commandTime": "2026-11-03T10:30:00"
}

网关返回任意 2xx 状态码视为设备确认,随后系统更新运行状态;连接失败或非 2xx 时不会修改状态。未配置网关地址时使用本地联调模式。

自动模拟采集

默认每 30 秒自动生成一组联调数据。接入真实 PLC/网关后应关闭模拟采集:

unattended:
  telemetry:
    auto-collect-enabled: false
    collect-interval-ms: 30000