核磅录入代码层次错误

yyb

18 小时以前 fd73fca2d3eaf5f53e81d634ecdea408604e798f

 pages/wareHouse/nuclearScale/nuclearscalerecord.vue

@@ -267,7 +267,7 @@
         // 检查蓝牙连接状态
         async checkBluetoothConnection() {
            if (!this.connectedDevice) return false;
				

            // 尝试发送一个简单命令检查连接状态
            return new Promise(resolve => {
               jcapi.checkPrinterStatus(this.connectedDevice.address, r => {
@@ -346,131 +346,133 @@
               rwMatlBindId: item.id
            };
            try {
            let res = await this.$u.api.dailyPaper.zongjianLabelInfo(params)
            if (!res.data) {
               this.$refs.uToast.show({
                  title: '未查询到该标签信息！',
                  type: 'warning '
               })
               return
            }
            // const res = {
            //    ht: 'HT20250717995352665',
            //    lj: '88.118.1/A0611091',
            //    ljms: '铜单线 裸铜-TY-圆形-3.0',
            //    fh: '1083.6',
            //    scdt: '2025-07-14 13:46:55.0',
            //    scph: '2025071273-3',
            //    fhdw: '江东合金技术有限公司',
            //    shdw: '昆山泰德通铜业有限公司',
            // }
            // 从API响应中提取所需数据
            const {
               ht,
               lj,
               ljms,
               fh,
               scdt,
               scph,
               fhdw,
               shdw
            } = res.data
            // const jsonString = JSON.stringify(res.data)

            // 初始化画板
            jcapi.initDrawingBoard({
               width: 70,
               height: 49,
               rotate: 90
            });

            // 绘制二维码
            const qrContent =
               `ht:${ht}\nlj:${lj}\nljms:${ljms}\nfh:${fh}\nscdt:${scdt}\nscph:${scph}\nfhdw:${fhdw}\nshdw:${shdw}`;
            jcapi.drawLabelQrCode({
               x: 43.5,
               y: 2,
               width: 24,
               height: 24,
               value: qrContent,
               rotate: 0,
               codeType: QrCodeType.QrCode,
            });
            // getDrawLabelLine   （x坐标，y坐标，线条宽度，线条高度，旋转角度，线条类型）
            // 绘制横线 实线8条
            this.getDrawLabelLine(1, 1, 67, 0.5, 0, LineType.Solid)
            this.getDrawLabelLine(1, 6, 42, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 11, 42, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 16, 42, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 21, 42, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 27, 67, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 32, 67,0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 37, 67, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 42, 67, 0.3, 0, LineType.Solid)
            this.getDrawLabelLine(1, 47, 67, 0.5, 0, LineType.Solid)
            //绘制竖线
            this.getDrawLabelLine(1, 1, 0.5, 46, 0, LineType.Solid) // 竖线1
            this.getDrawLabelLine(43, 1, 0.3, 26, 0, LineType.Solid) // 竖线2
            this.getDrawLabelLine(68, 1, 0.5, 46, 0, LineType.Solid) // 竖线2
            // getDrawLabelText   （1.x坐标，2.y坐标，3.文本框宽度，4.文本框高度，5.绘制文字内容，6.字体大小（默认高度4mm）,7.旋转角度,8.换行方式,9.⾏间隔,10.字间隔,11.文字水平布局,12文字垂直布局)
            // 标题
            this.getDrawLabelText(3, 2.5, 40, 8, '中天科技装箱清单', 2.5, 0, LineModeType.AutoHeight, 0, 0, 1, 1,1)
            // 填冲文字标题
            this.getDrawLabelText(2, 7, 25, 8, '合同号:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 12, 25, 8, '零件号:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 17, 25, 8, '零件描述:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 22.5, 25, 8, '发货/装箱数:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 27.5, 25, 8, '生产日期:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 32.5, 25, 8, '生产批号:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 37.5, 25, 8, '发货单位:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            this.getDrawLabelText(2, 42.5, 25, 8, '收货单位:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1,1)
            // 填冲参数值
            this.getDrawLabelText(11, 7, 30, 8, ht, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(11, 12, 32, 8, lj, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(14, 17, 30, 8, ljms, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(17, 22.5, 27, 8, fh, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(14, 27.5, 55, 8, scdt, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(14, 32.5, 55, 8, scph, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(14, 37.5,55, 8, fhdw, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)
            this.getDrawLabelText(14, 42.5, 55, 8, shdw, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0,1)

            // 生成打印数据
            let imageJsonObj = jcapi.generateLabelJson()
            let imageJsonObj111 = jcapi.generatePrintPreviewImage(imageJsonObj)
            console.log('预览', imageJsonObj111)
            // // 设置打印任务
            jcapi.startJob({
               totalCount: 1,
               density: this.printDensity,
               labelType: this.labelType,
               printMode: this.printMode,
            }, function(r) {
               console.log('打印', r)
               if (r.code == 0) {
                  // 打印数据
                  jcapi.printData(imageJsonObj, {
                     "printQuantity": 1,
                  }, function(r) {
                     if (r.code == 0) {
                        console.log("打印成功")
                        uni.showToast({
                           title: '打印成功',
                           icon: 'success'
                        })
                     } else {
                        console.log("打印失败")
                        uni.showToast({
                           title: '打印失败: ' + (r.msg || '未知错误'),
                           icon: 'none'
                        })
                     }
               let res = await this.$u.api.dailyPaper.zongjianLabelInfo(params)
               if (!res.data) {
                  this.$refs.uToast.show({
                     title: '未查询到该标签信息！',
                     type: 'warning '
                  })
               } else {
                  console.log("设置打印任务失败")
                  return
               }
               // const res = {
               //    ht: 'HT20250717995352665',
               //    lj: '88.118.1/A0611091',
               //    ljms: '铜单线 裸铜-TY-圆形-3.0',
               //    fh: '1083.6',
               //    scdt: '2025-07-14 13:46:55.0',
               //    scph: '2025071273-3',
               //    fhdw: '江东合金技术有限公司',
               //    shdw: '昆山泰德通铜业有限公司',
               // }
               // 从API响应中提取所需数据
               const {
                  ht,
                  lj,
                  ljms,
                  fh,
                  scdt,
                  scph,
                  fhdw,
                  shdw
               } = res.data
               // const jsonString = JSON.stringify(res.data)

            })
               // 初始化画板
               jcapi.initDrawingBoard({
                  width: 70,
                  height: 49,
                  rotate: 90
               });

               // 绘制二维码
               const qrContent =
                  `ht:${ht}\nlj:${lj}\nljms:${ljms}\nfh:${fh}\nscdt:${scdt}\nscph:${scph}\nfhdw:${fhdw}\nshdw:${shdw}`;
               jcapi.drawLabelQrCode({
                  x: 43.5,
                  y: 2,
                  width: 24,
                  height: 24,
                  value: qrContent,
                  rotate: 0,
                  codeType: QrCodeType.QrCode,
               });
               // getDrawLabelLine   （x坐标，y坐标，线条宽度，线条高度，旋转角度，线条类型）
               // 绘制横线 实线8条
               this.getDrawLabelLine(1, 1, 67, 0.5, 0, LineType.Solid)
               this.getDrawLabelLine(1, 6, 42, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 11, 42, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 16, 42, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 21, 42, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 27, 67, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 32, 67, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 37, 67, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 42, 67, 0.3, 0, LineType.Solid)
               this.getDrawLabelLine(1, 47, 67, 0.5, 0, LineType.Solid)
               //绘制竖线
               this.getDrawLabelLine(1, 1, 0.5, 46, 0, LineType.Solid) // 竖线1
               this.getDrawLabelLine(43, 1, 0.3, 26, 0, LineType.Solid) // 竖线2
               this.getDrawLabelLine(68, 1, 0.5, 46, 0, LineType.Solid) // 竖线2
               // getDrawLabelText   （1.x坐标，2.y坐标，3.文本框宽度，4.文本框高度，5.绘制文字内容，6.字体大小（默认高度4mm）,7.旋转角度,8.换行方式,9.⾏间隔,10.字间隔,11.文字水平布局,12文字垂直布局)
               // 标题
               this.getDrawLabelText(3, 2.5, 40, 8, '中天科技装箱清单', 2.5, 0, LineModeType.AutoHeight, 0, 0, 1, 1, 1)
               // 填冲文字标题
               this.getDrawLabelText(2, 7, 25, 8, '合同号:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 12, 25, 8, '零件号:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 17, 25, 8, '零件描述:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 22.5, 25, 8, '发货/装箱数:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 27.5, 25, 8, '生产日期:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 32.5, 25, 8, '生产批号:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 37.5, 25, 8, '发货单位:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               this.getDrawLabelText(2, 42.5, 25, 8, '收货单位:', 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 1, 1)
               // 填冲参数值
               this.getDrawLabelText(11, 7, 30, 8, ht, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(11, 12, 32, 8, lj, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(14, 17, 30, 8, ljms, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(17, 22.5, 27, 8, fh, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(14, 27.5, 55, 8, scdt, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(14, 32.5, 55, 8, scph, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(14, 37.5, 55, 8, fhdw, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)
               this.getDrawLabelText(14, 42.5, 55, 8, shdw, 2.5, 0, LineModeType.AutoHeight, 0, 0, 0, 0, 1)

               // 生成打印数据
               let imageJsonObj = jcapi.generateLabelJson()
               let imageJsonObj111 = jcapi.generatePrintPreviewImage(imageJsonObj)
               console.log('预览', imageJsonObj111)
               // // 设置打印任务
               jcapi.startJob({
                  totalCount: 1,
                  density: this.printDensity,
                  labelType: this.labelType,
                  printMode: this.printMode,
               }, function(r) {
                  console.log('打印', r)
                  if (r.code == 0) {
                     // 打印数据
                     jcapi.printData(imageJsonObj, {
                        "printQuantity": 1,
                     }, function(r) {
                        if (r.code == 0) {
                           console.log("打印成功")
                           uni.showToast({
                              title: '打印成功',
                              icon: 'success'
                           })
                        } else {
                           console.log("打印失败")
                           uni.showToast({
                              title: '打印失败: ' + (r.msg || '未知错误'),
                              icon: 'none'
                           })
                        }
                     })
                  } else {
                     console.log("设置打印任务失败")
                  }

               })
            } catch (error) {
               console.log(error)
            }
         },
         tapQuery(item) {
            this.maskShow = false
@@ -517,7 +519,8 @@
                     // 搜索到设备回调
                     uni.hideLoading()
                     // 如果之前有连接的设备但不在搜索结果中，说明设备已更换
                     if (_this.connectedDevice && !r.some(dev => dev.address === _this.connectedDevice.address)) {
                     if (_this.connectedDevice && !r.some(dev => dev.address === _this
                           .connectedDevice.address)) {
                        _this.connectedDevice = null;
                        uni.showToast({
                           icon: 'none',
@@ -552,7 +555,7 @@
         },
         // 填冲文字标题
         getDrawLabelText(x, y, width, height, value, fontSize, rotate, lineMode, lineSpace, letterSpace,
            textAlignHorizontal, textAlignVertical,bold) {
            textAlignHorizontal, textAlignVertical, bold) {

            jcapi.drawLabelText({
               x: x,
@@ -567,7 +570,7 @@
               letterSpace: letterSpace,
               textAlignHorizontal: textAlignHorizontal,
               textAlignVertical: textAlignVertical,
               bold:bold
               bold: bold
            })
         },