tx-lims-after.git

			@@ -15,25 +15,20 @@
			import com.baomidou.mybatisplus.core.toolkit.Wrappers;
			import com.baomidou.mybatisplus.extension.plugins.pagination.Page;
			import com.baomidou.mybatisplus.extension.service.impl.ServiceImpl;
			import com.deepoove.poi.XWPFTemplate;
			import com.deepoove.poi.config.Configure;
			import com.deepoove.poi.config.ConfigureBuilder;
			import com.deepoove.poi.data.*;
			import com.deepoove.poi.data.style.*;
			import com.deepoove.poi.util.TableTools;
			import com.yuanchu.mom.common.GetLook;
			import com.yuanchu.mom.common.PrintChina;
			import com.yuanchu.mom.dto.InsOrderPlanDTO;
			import com.yuanchu.mom.dto.InsProductResultDto;
			import com.yuanchu.mom.dto.SampleProductDto;
			import com.yuanchu.mom.dto.SubmitPlanDto;
			import com.yuanchu.mom.exception.ErrorException;
			import com.yuanchu.mom.mapper.*;
			import com.yuanchu.mom.pojo.*;
			import com.yuanchu.mom.service.*;
			import com.yuanchu.mom.utils.*;
			import com.yuanchu.mom.vo.*;
			import org.apache.commons.io.IOUtils;
			import org.apache.poi.xwpf.usermodel.*;
			import org.apache.poi.xssf.usermodel.XSSFSheet;
			import org.apache.poi.xssf.usermodel.XSSFWorkbook;
			import org.springframework.beans.factory.annotation.Value;
			import org.springframework.stereotype.Service;
			import org.springframework.transaction.annotation.Transactional;
			@@ -43,7 +38,6 @@
			import javax.servlet.http.HttpServletRequest;
			import java.io.*;
			import java.nio.file.Files;
			import java.nio.file.Paths;
			import java.text.SimpleDateFormat;
			import java.time.LocalDate;
			import java.time.LocalDateTime;
			@@ -51,8 +45,6 @@
			import java.time.format.DateTimeFormatter;
			import java.util.*;
			import java.util.concurrent.CompletableFuture;
			import java.util.concurrent.atomic.AtomicInteger;
			import java.util.concurrent.atomic.AtomicReference;
			import java.util.regex.Matcher;
			import java.util.regex.Pattern;
			import java.util.stream.Collectors;
			@@ -81,17 +73,25 @@
			@Resource
			private InsProductMapper insProductMapper;
			@Resource
			private InsOrderUserMapper insOrderUserMapper;
			@Resource
			private ShiftTimeMapper shiftTimeMapper;
			@Resource
			private PerformanceShiftMapper performanceShiftMapper;
			@Resource
			private WarehouseHistoryMapper warehouseHistoryMapper;

			@Resource
			private WarehouseService warehouseService;

			@Value("${wordUrl}")
			private String wordUrl;

			@Value("${twoCode}")
			private String twoCode;

			@Resource
			WordUtils wordUtils;

			@Resource
			private InsReportMapper insReportMapper;
			@@ -127,32 +127,19 @@
			private String imgUrl;

			@Resource
			private InsBushingService insBushingService;

			@Resource
			private InsBushingMapper insBushingMapper;

			@Resource
			private InsFiberMapper insFiberMapper;

			@Resource
			private InsFibersMapper insFibersMapper;

			@Resource
			private InsOrderFileMapper insOrderFileMapper;

			@Resource
			FuSheUtils fuSheUtils;

			@Override
			public Map<String, Object> selectInsOrderPlanList(Page page, InsOrderPlanDTO insOrderPlanDTO) {
			Map<String, Object> map = new HashMap<>();
			map.put("head", PrintChina.printChina(InsOrderPlanVO.class));
			Map<String, Integer> map1 = getLook.selectPowerByMethodAndUserId(null);
			User user = userMapper.selectById(map1.get("userId"));//当前登录的人

			String laboratory = null;
			String userName = null;
			Integer userId = null;
			if (ObjectUtil.isNotEmpty(insOrderPlanDTO.getUserId())) {
			userId = map1.get("userId");
			userName = userMapper.selectById(map1.get("userId")).getName();
			insOrderPlanDTO.setUserId(null);
			}
			@@ -186,31 +173,6 @@
			if (Objects.isNull(entity)) {
			return false;
			}
			/认领需要判断该样品是否在库/
			//查询样品id(过滤没有检验项目的样品)
			List<Integer> sampleIds = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery()
			.eq(InsSample::getInsOrderId, entity.getInsSampleId())).stream().map(InsSample::getId).collect(Collectors.toList());
			for (Integer samId : sampleIds) {
			//过滤没有检验项目的样品id
			if (ObjectUtils.isEmpty(insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, samId)
			.eq(InsProduct::getState, 1)))) {
			continue;
			}
			//入库次数
			Long inCount = warehouseHistoryMapper.selectCount(Wrappers.<WarehouseHistory>lambdaQuery()
			.eq(WarehouseHistory::getState, 1)
			.eq(WarehouseHistory::getInsSampleId, samId));
			//出库次数
			Long outCount = warehouseHistoryMapper.selectCount(Wrappers.<WarehouseHistory>lambdaQuery()
			.eq(WarehouseHistory::getState, 2)
			.eq(WarehouseHistory::getInsSampleId, samId));
			if (inCount > 0 && inCount > outCount) {
			continue;
			} else {
			throw new ErrorException("所选的样品库存不足,请检查入库和出库记录!");
			}
			}
			Map<String, Integer> map1 = getLook.selectPowerByMethodAndUserId(null);
			Integer userId = map1.get("userId");
			InsSampleUser insSampleUser = new InsSampleUser(entity.getInsSampleId().intValue(), userId, 0, entity.getSonLaboratory());
			@@ -225,14 +187,14 @@
			if (BeanUtil.isEmpty(order.getInsTime())) {
			insOrder.setInsTime(LocalDateTime.now());
			insOrderMapper.updateById(insOrder);
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate().eq(InsOrderState::getInsOrderId, id).eq(InsOrderState::getLaboratory, laboratory).set(InsOrderState::getInsTime, LocalDateTime.now()).set(InsOrderState::getInsState, 1));
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getInsOrderId, id)
			.eq(InsOrderState::getLaboratory, laboratory)
			.set(InsOrderState::getInsTime, LocalDateTime.now())
			.set(InsOrderState::getInsState, 1));
			}
			Map<String, Object> map = insOrderService.getInsOrderAndSample(id, laboratory);
			List<SampleProductDto> list = JSON.parseArray(JSON.toJSONString(map.get("sampleProduct")), SampleProductDto.class);
			for (SampleProductDto samples : list) {
			if (BeanUtil.isEmpty(samples.getInsProduct())) continue;
			samples.setBushing(insBushingService.selectBushingBySampleId(samples.getId()));
			}
			map.put("sampleProduct", list);
			return map;
			}
			@@ -244,6 +206,51 @@
			case 0:
			//样品
			insProducts = insSampleMapper.getInsProduct1(id, laboratory);
			if (insProducts.size() == 0) {
			insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, id)
			.eq(InsProduct::getState, 1)
			.eq(InsProduct::getSonLaboratory, laboratory));
			for (InsProduct insProduct : insProducts) {
			List<InsProductResult2> insProductResult2List = insProductResult2Mapper.selectList(Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getInsProductId, insProduct.getId()).isNull(InsProductResult2::getNum));
			insProduct.setInsProductResult2(insProductResult2List);
			InsProductResult insProductResult = insProductResultMapper.selectOne(Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getInsProductId, insProduct.getId()).isNull(InsProductResult::getNum));
			insProduct.setInsProductResult(insProductResult);
			}
			}
			/*if (insProducts.size() == 0) {
			insProducts = insSampleMapper.getIns2Product1(id, laboratory);
			}*/
			break;
			case 1:
			//光纤带
			break;
			case 2:
			//光纤
			break;
			case 3:
			//套管
			break;
			}
			Set<Integer> set = new HashSet<>();
			Map<Integer, String> map2 = new HashMap<>();
			if (BeanUtil.isEmpty(insProducts)) return null;
			getTemplateThing(set, map2, insProducts);
			return insProducts;
			}

			@Override
			public List<InsProduct> getInsProduct2(Integer id, Integer type, String laboratory, HttpServletRequest request, Integer num) {
			List<InsProduct> insProducts = new ArrayList<>();
			switch (type) {
			case 0:
			//样品
			insProducts = insSampleMapper.get2InsProduct1(id, laboratory, num);
			if (insProducts.size() == 0) {
			throw new ErrorException("当前检验数据还没有保存,保存之后有数据历史");
			}
			break;
			case 1:
			//光纤带
			@@ -284,13 +291,20 @@
			public Map<String, Object> getFileList(Page page, InsOrderFile insOrderFile) {
			Map<String, Object> map = new HashMap<>();
			map.put("head", PrintChina.printChina(InsOrderFile.class));
			IPage<InsOrderFile> insOrderFileIPage = insOrderFileMapper.getFileList(page, QueryWrappers.queryWrappers(insOrderFile));
			Integer insOrderId = insOrderFile.getInsOrderId();
			insOrderFile.setInsOrderId(null);
			String sonLaboratory = null;
			if (ObjectUtils.isNotEmpty(insOrderFile.getSonLaboratory())) {
			sonLaboratory = insOrderFile.getSonLaboratory();
			insOrderFile.setSonLaboratory(null);
			}
			IPage<InsOrderFile> insOrderFileIPage = insOrderFileMapper.getFileList(page, QueryWrappers.queryWrappers(insOrderFile), insOrderId, sonLaboratory);
			map.put("body", insOrderFileIPage);
			return map;
			}

			@Override
			public int uploadFile(Integer orderId, MultipartFile file) {
			public int uploadFile(Integer orderId, MultipartFile file, String sonLaboratory) {
			String urlString;
			String pathName;
			String path;
			@@ -313,195 +327,39 @@
			if (!realpath.exists()) {
			realpath.mkdirs();
			}
			pathName = UUID.randomUUID() + "_" + file.getOriginalFilename();
			pathName = file.getOriginalFilename().replace("#","&");
			urlString = realpath + "/" + pathName;
			file.transferTo(new File(urlString));
			insOrderFile.setFileUrl(pathName);
			return insOrderFileMapper.insert(insOrderFile);
			if (ObjectUtils.isNotEmpty(sonLaboratory)) {
			insOrderFile.setSonLaboratory(sonLaboratory);
			//删除重复的数据
			insOrderFileMapper.delete(Wrappers.<InsOrderFile>lambdaQuery()
			.eq(InsOrderFile::getInsOrderId, orderId)
			.eq(InsOrderFile::getType, insOrderFile.getType())
			.eq(InsOrderFile::getFileName, insOrderFile.getFileName())
			.eq(InsOrderFile::getSonLaboratory, insOrderFile.getSonLaboratory())
			.eq(InsOrderFile::getFileUrl, insOrderFile.getFileUrl()));
			} else {
			//删除重复的数据
			insOrderFileMapper.delete(Wrappers.<InsOrderFile>lambdaQuery()
			.eq(InsOrderFile::getInsOrderId, orderId)
			.eq(InsOrderFile::getType, insOrderFile.getType())
			.eq(InsOrderFile::getFileName, insOrderFile.getFileName())
			.isNull(InsOrderFile::getSonLaboratory)
			.eq(InsOrderFile::getFileUrl, insOrderFile.getFileUrl()));
			}
			insOrderFileMapper.insert(insOrderFile);
			//如果是辐射试验(近场/远程上传的csv文件)
			String[] split = filename.split("\\.");
			if (ObjectUtils.isNotEmpty(sonLaboratory) && (sonLaboratory.equals("近场") \|\| sonLaboratory.equals("远场")) &&
			split[split.length - 1].equals("csv")) {
			fuSheUtils.getFuSheWord(sonLaboratory, insOrderFile);
			}
			} catch (Exception e) {
			e.printStackTrace();
			System.err.println("附件上传错误");
			return 0;
			}
			}

			//切换记录模版查询检验内容
			@Override
			public Map<String, Object> getReportModel(Integer sampleId) {
			Map<String, Object> map = new HashMap<>();
			//先查出套管
			List<InsBushing> insBushings = insBushingMapper.selectList(Wrappers.<InsBushing>lambdaQuery().eq(InsBushing::getInsSampleId, sampleId));
			List<InsFibers> fibers = new ArrayList<>();
			List<InsFiber> fiber = new ArrayList<>();
			List<InsBushing> bush = new ArrayList<>();
			for (InsBushing insBushing : insBushings) {
			//再查询出所有的光纤带
			List<InsFibers> insFibers = insFibersMapper.selectList(Wrappers.<InsFibers>lambdaQuery().eq(InsFibers::getInsBushingId, insBushing.getId()));
			List<InsFiber> insFiberList = insFiberMapper.selectList(Wrappers.<InsFiber>lambdaQuery().eq(InsFiber::getInsBushingId, insBushing.getId()));
			if (CollectionUtils.isNotEmpty(insFibers)) {
			for (InsFibers insFiber : insFibers) {
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery().eq(InsProduct::getInsFibersId, insFiber.getId()));
			List<Integer> collect = insProducts.stream().map(InsProduct::getInsResult)
			.filter(sm -> ObjectUtils.isNotEmpty(sm) && sm != 2).collect(Collectors.toList());
			if (insProducts.size() == collect.size()) {
			insFiber.setState(1);//已检验
			} else {
			insFiber.setState(0);//未检验
			}
			}
			fibers.addAll(insFibers);
			//查出光纤带下所有的光纤
			List<InsFiber> fiberList = insFiberMapper.selectList(Wrappers.<InsFiber>lambdaQuery().in(InsFiber::getInsFibersId, insFibers.stream().map(InsFibers::getId).collect(Collectors.toList())));
			for (InsFiber insFiber : fiberList) {
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery().eq(InsProduct::getInsFiberId, insFiber.getId()));
			List<Integer> collect = insProducts.stream().map(InsProduct::getInsResult)
			.filter(sm -> ObjectUtils.isNotEmpty(sm) && sm != 2).collect(Collectors.toList());
			if (insProducts.size() == collect.size()) {
			insFiber.setState(1);//已检验
			} else {
			insFiber.setState(0);//未检验
			}
			}
			fiber.addAll(fiberList);
			}
			//如果套管下没有光纤带就只有光纤了
			else if (CollectionUtils.isNotEmpty(insFiberList)) {
			for (InsFiber insFiber : insFiberList) {
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery().eq(InsProduct::getInsFiberId, insFiber.getId()));
			List<Integer> collect = insProducts.stream().map(InsProduct::getInsResult)
			.filter(sm -> ObjectUtils.isNotEmpty(sm) && sm != 2).collect(Collectors.toList());
			if (insProducts.size() == collect.size()) {
			insFiber.setState(1);//已检验
			} else {
			insFiber.setState(0);//未检验
			}
			}
			fiber.addAll(insFiberList);
			}
			//如果光纤带和光纤都没有就只有套管(松套管)
			else {
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsBushId, insBushing.getId()));
			List<Integer> collect = insProducts.stream()
			.map(InsProduct::getInsResult)
			.filter(sm -> ObjectUtils.isNotEmpty(sm) && sm != 2).collect(Collectors.toList());
			if (insProducts.size() == collect.size()) {
			insBushing.setState(1);//已检验
			} else {
			insBushing.setState(0);//未检验
			}
			bush.add(insBushing);
			}
			}
			map.put("光纤带", fibers);
			map.put("光纤", fiber);
			map.put("套管", bush);
			return map;
			}

			//温度循环查看列表数据(包括通过样品id,循环次数,温度,循环次数进行筛选)
			@Override
			public Map<String, Object> temCycle(Integer sampleId, String inspectionItem, String inspectionItemSubclass) {
			Map<String, Object> map = new HashMap<>();
			//样品信息
			SampleVo sampleVo = insSampleMapper.getDetailById(sampleId);
			map.put("sampleVo", sampleVo);
			List<ProductVo> productVos = new ArrayList<>();
			//先查出这个样品下有哪些管色标,光纤带,光纤色标
			//先查出套管
			List<InsBushing> insBushings = insBushingMapper.selectList(Wrappers.<InsBushing>lambdaQuery().eq(InsBushing::getInsSampleId, sampleId));
			if (insBushings.size() > 0) {
			//通信--温度循环
			for (InsBushing insBushing : insBushings) {
			//再查询出所有的光纤带
			List<InsFibers> insFibers = insFibersMapper.selectList(Wrappers.<InsFibers>lambdaQuery().eq(InsFibers::getInsBushingId, insBushing.getId()));
			if (CollectionUtils.isNotEmpty(insFibers)) {
			for (InsFibers insFiber : insFibers) {
			//查出光纤带下所有的光纤
			List<InsFiber> fiberList = insFiberMapper.selectList(Wrappers.<InsFiber>lambdaQuery().eq(InsFiber::getInsFibersId, insFiber.getId()));
			for (InsFiber fiber : fiberList) {
			//再根据关联的光纤配置的id和循环次数和温度和样品id进行查询检验项目
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, sampleId)
			.eq(InsProduct::getInspectionItem, inspectionItem)
			.eq(InsProduct::getInspectionItemSubclass, inspectionItemSubclass)
			.eq(InsProduct::getInsFiberId, fiber.getId()));
			for (InsProduct insProduct : insProducts) {
			InsProductResult insProductResult = insProductResultMapper.selectOne(Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getInsProductId, insProduct.getId()));
			ProductVo productVo = new ProductVo();
			productVo.setCode(insFiber.getCode());
			productVo.setColor(fiber.getColor());
			productVo.setBushColor(insBushing.getColor());
			if (ObjectUtils.isNotEmpty(insProductResult)) {
			insProduct.setInsProductResult(insProductResult);
			}
			//求同等条件下1次循环20度常温的计算值
			InsProductResult insProductResult1 = insProductResultMapper.selectOne(Wrappers.<InsProductResult>lambdaQuery().eq(InsProductResult::getInsProductId, insProductMapper.selectOne(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, sampleId)
			.eq(InsProduct::getInspectionItem, "1")
			.eq(InsProduct::getInspectionItemSubclass, "20℃(常温)")
			.eq(InsProduct::getInspectionItemClass, insProduct.getInspectionItemClass())
			.eq(InsProduct::getInsFiberId, fiber.getId())).getId()));
			if (ObjectUtils.isNotEmpty(insProductResult1) && !insProductResult1.getComValue().equals("[]")) {
			insProduct.setComplue(insProductResult1.getComValue().split(":")[1].split("\"")[1]);
			}
			productVo.setInsProduct(insProduct);
			productVos.add(productVo);
			}
			}
			}
			} else {
			//如果套管下没有光纤带就只有光纤了
			List<InsFiber> insFiberList = insFiberMapper.selectList(Wrappers.<InsFiber>lambdaQuery().eq(InsFiber::getInsBushingId, insBushing.getId()));
			for (InsFiber fiber : insFiberList) {
			//再根据关联的光纤配置的id和循环次数和温度和样品id进行查询检验项目
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, sampleId)
			.eq(InsProduct::getInspectionItem, inspectionItem)
			.eq(InsProduct::getInspectionItemSubclass, inspectionItemSubclass)
			.eq(InsProduct::getInsFiberId, fiber.getId()));
			for (InsProduct insProduct : insProducts) {
			InsProductResult insProductResult = insProductResultMapper.selectOne(Wrappers.<InsProductResult>lambdaQuery().eq(InsProductResult::getInsProductId, insProduct.getId()));
			ProductVo productVo = new ProductVo();
			productVo.setCode("-");
			productVo.setColor(fiber.getColor());
			productVo.setBushColor(fiber.getBushColor());
			insProduct.setInsProductResult(insProductResult);
			//求同等条件下1次循环20度常温的计算值
			InsProductResult insProductResult1 = insProductResultMapper.selectOne(Wrappers.<InsProductResult>lambdaQuery().eq(InsProductResult::getInsProductId, insProductMapper.selectOne(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, sampleId)
			.eq(InsProduct::getInspectionItem, "1")
			.eq(InsProduct::getInspectionItemSubclass, "20℃(常温)")
			.eq(InsProduct::getInspectionItemClass, insProduct.getInspectionItemClass())
			.eq(InsProduct::getInsFiberId, fiber.getId())).getId()));
			if (ObjectUtils.isNotEmpty(insProductResult1) && !insProductResult1.getComValue().equals("[]")) {
			insProduct.setComplue(insProductResult1.getComValue().split(":")[1].split("\"")[1]);
			}
			productVo.setInsProduct(insProduct);
			productVos.add(productVo);
			}
			}
			}
			}
			productVos = productVos.stream().sorted(Comparator.comparing(productVo -> productVo.getInsProduct().getInspectionItemClass())).collect(Collectors.toList());
			} else {
			//电力--热循环和温升试验
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, sampleId)
			.eq(InsProduct::getInspectionItem, inspectionItem));
			for (InsProduct insProduct : insProducts) {
			InsProductResult insProductResult = insProductResultMapper.selectOne(Wrappers.<InsProductResult>lambdaQuery().eq(InsProductResult::getInsProductId, insProduct.getId()));
			ProductVo productVo = new ProductVo();
			if (ObjectUtils.isNotEmpty(insProductResult)) {
			insProduct.setInsProductResult(insProductResult);
			}
			productVo.setInsProduct(insProduct);
			productVos.add(productVo);
			}
			}
			map.put("productVos", productVos);
			return map;
			return 0;
			}

			@Override
			@@ -515,20 +373,148 @@
			public int deleteInsContext(InsProductResultVo insProductResultVo) {
			return insProductResult2Mapper.delete(Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getFrequency, insProductResultVo.getFrequency())
			.eq(InsProductResult2::getNum, insProductResultVo.getNum())
			.in(InsProductResult2::getInsProductId, insProductResultVo.getProductIds()));
			}

			//扫码报检
			@Override
			public int deleteInsContext2(String frequency, Integer productId, String often) {
			return insProductResult2Mapper.delete(Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getFrequency, frequency)
			.eq(InsProductResult2::getInsProductId, productId)
			.eq(InsProductResult2::getOften, often));
			public int scanInsOrderState(String sonLaboratory, String sampleCode, String trees) {
			/样品入库/
			warehouseService.inWarehouse(trees, sampleCode);
			/新增检验任务/
			//先判断该订单是否有这个站点的项目
			InsSample insSample = insSampleMapper.selectOne(Wrappers.<InsSample>lambdaQuery().eq(InsSample::getSampleCode, sampleCode));
			List<Integer> sampleIds = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery()
			.eq(InsSample::getInsOrderId, insSample.getInsOrderId())).stream().map(InsSample::getId).collect(Collectors.toList());
			List<String> collect = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getState, 1)
			.in(InsProduct::getInsSampleId, sampleIds)).stream().map(InsProduct::getSonLaboratory).collect(Collectors.toList());
			if (!collect.contains(sonLaboratory)) {
			throw new ErrorException("该订单没有" + sonLaboratory + "站点的相关项目,请查看下单详情!");
			}
			//判断该订单是否站点任务有结束试验
			List<InsOrderState> orderStates = insOrderStateMapper.selectList(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, insSample.getInsOrderId())
			.eq(InsOrderState::getInsState, 5));
			if (CollectionUtils.isNotEmpty(orderStates)) {
			throw new ErrorException("该订单站点的任务已经结束试验,无法再次进行试验!");
			}
			InsOrderState orderState = insOrderStateMapper.selectOne(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, insSample.getInsOrderId())
			.eq(InsOrderState::getLaboratory, sonLaboratory));
			if (ObjectUtils.isNotEmpty(orderState)) {
			//继续试验
			if (orderState.getInsState() == 6) {
			orderState.setInsState(0);
			orderState.setNum(orderState.getNum() + 1);//递增
			insOrderStateMapper.updateById(orderState);
			} /*else {
			throw new ErrorException("该订单站点的任务已创建,无法再次创建!");
			}*/
			} else {
			InsOrderState insOrderState = new InsOrderState();
			insOrderState.setInsOrderId(insSample.getInsOrderId());
			insOrderState.setLaboratory(sonLaboratory);
			insOrderState.setInsState(0);
			insOrderState.setNum(1);//初始是第一次
			insOrderStateMapper.insert(insOrderState);
			}
			return 1;
			}

			//扫码出库
			@Override
			public int outInsOrderState(String sonLaboratory, String sampleCode) {
			//判断该样品的检验任务是否已经结束(继续试验或者是结束试验)
			//先判断该订单是否有这个站点的项目
			InsSample insSample = insSampleMapper.selectOne(Wrappers.<InsSample>lambdaQuery().eq(InsSample::getSampleCode, sampleCode));
			List<Integer> sampleIds = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery()
			.eq(InsSample::getInsOrderId, insSample.getInsOrderId())).stream().map(InsSample::getId).collect(Collectors.toList());
			List<String> collect = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getState, 1)
			.in(InsProduct::getInsSampleId, sampleIds)).stream().map(InsProduct::getSonLaboratory).collect(Collectors.toList());
			if (!collect.contains(sonLaboratory)) {
			throw new ErrorException("该订单没有" + sonLaboratory + "站点的相关项目,请查看下单详情!");
			}
			//判断该订单是否站点任务有(继续试验或者是结束试验)
			List<InsOrderState> orderStates = insOrderStateMapper.selectList(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, insSample.getInsOrderId())
			.eq(InsOrderState::getInsState, 5));
			if (CollectionUtils.isEmpty(orderStates)) {
			List<InsOrderState> orderStates1 = insOrderStateMapper.selectList(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, insSample.getInsOrderId())
			.eq(InsOrderState::getLaboratory, sonLaboratory)
			.eq(InsOrderState::getInsState, 6));
			if (CollectionUtils.isEmpty(orderStates1)) {
			throw new ErrorException("该样品的检验任务还没有结束试验或继续试验,暂时无法出库!");
			}
			}
			boolean a = true;
			warehouseService.outWarehouse(sampleCode, a);
			return 0;
			}

			@Override
			public void saveInsContext(Map<String, Object> insContext) {
			public List<InsOrderUser> getInsOrderUserList(Integer insOrderStateId) {
			return insOrderUserMapper.getInsOrderUserList(insOrderStateId);
			}

			private static final String splitIdentifier = "@-@"; // 自定义唯一标识分割符

			//预览文件
			@Override
			public Object preview(Integer id) throws Exception {
			InsOrderFile insOrderFile = insOrderFileMapper.selectById(id);
			File file = new File(wordUrl + "/" + insOrderFile.getFileUrl());
			StringBuilder stringBuilder = new StringBuilder();
			// 创建 reader
			try (BufferedReader br = Files.newBufferedReader(file.toPath())) {
			// CSV文件的分隔符
			String DELIMITER = ",";
			// 按行读取
			String line;
			while ((line = br.readLine()) != null) {
			// 分割
			String[] columns = line.split(DELIMITER);
			// 打印行
			stringBuilder.append(String.join(splitIdentifier, columns)).append("\n");
			}
			} catch (Exception ex) {
			List<Object> list = new ArrayList<>();
			//创建工作簿对象
			XSSFWorkbook xssfWorkbook = new XSSFWorkbook(new FileInputStream(file));
			//获取工作簿下sheet的个数只读取第一个sheet
			int sheetNum = xssfWorkbook.getNumberOfSheets();
			//遍历工作簿中的所有数据
			for (int i = 0; i < sheetNum; i++) {
			Map<String, Object> map = new HashMap<>();
			StringBuilder result = new StringBuilder();
			XSSFSheet sheet = xssfWorkbook.getSheetAt(i);
			//获取最后一行的num，即总行数。此处从0开始
			int maxRow = sheet.getLastRowNum();
			for (int row = 0; row <= maxRow; row++) {
			//获取最后单元格num，即总单元格数 *注意：此处从1开始计数*
			int maxRol = sheet.getRow(row).getLastCellNum();
			StringBuilder aLine = new StringBuilder();
			for (int rol = 0; rol < maxRol; rol++) {
			aLine.append(sheet.getRow(row).getCell(rol)).append(",");
			}
			String substring = aLine.substring(0, aLine.length() - 1);
			result.append(substring).append("\n");
			}
			map.put("sheetName", sheet.getSheetName());
			map.put("content", result.toString());
			list.add(map);
			}
			return list;
			}
			return stringBuilder.toString();
			}

			//模版保存检验内容
			@Override
			public void saveInsContext(Map<String, Object> insContext, Integer num) {
			Integer userId = getLook.selectPowerByMethodAndUserId(null).get("userId");
			CompletableFuture.supplyAsync(() -> {
			insContext.forEach((k, v) -> {
			@@ -536,6 +522,7 @@
			InsProduct insProduct = new InsProduct();
			insProduct.setId(Integer.parseInt(k));
			List<InsProductResult> results = insProductResultMapper.selectList(Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getNum, num)
			.eq(InsProductResult::getInsProductId, insProduct.getId()));
			InsProductResult result;
			if (CollectionUtils.isEmpty(results)) {
			@@ -544,6 +531,7 @@
			result = results.get(0);
			}
			result.setInsProductId(Integer.parseInt(k));
			result.setNum(num);
			//检验值
			if (jo.get("insValue") != null) {
			JSONArray jsonArray = JSON.parseArray(JSON.toJSONString(jo.get("insValue")));
			@@ -588,6 +576,26 @@
			}
			} catch (Exception e) {
			insProduct.setLastValue("");//''
			}
			//试验前样品检查
			try {
			JSONObject resValue = JSON.parseObject(JSON.toJSONString(jo.get("beforeCheck")));
			if (resValue.get("v") != null) {
			Object o = JSON.parseObject(JSON.toJSONString(resValue.get("v"))).get("v");
			result.setBeforeCheck(o.equals("") ? null : (o.toString()));
			}
			} catch (Exception e) {
			result.setBeforeCheck("");//''
			}
			//试验后样品检查
			try {
			JSONObject resValue = JSON.parseObject(JSON.toJSONString(jo.get("afterCheck")));
			if (resValue.get("v") != null) {
			Object o = JSON.parseObject(JSON.toJSONString(resValue.get("v"))).get("v");
			result.setAfterCheck(o.equals("") ? null : (o.toString()));
			}
			} catch (Exception e) {
			result.setAfterCheck("");//''
			}
			//设备编号
			if (jo.get("equipValue") != null) {
			@@ -634,67 +642,6 @@
			insProductMapper.updateById(insProduct);
			insProductUserMapper.insert(new InsProductUser(null, userId, LocalDateTime.now(), insProduct.getId()));
			insProduct = insProductMapper.selectById(insProduct);
			/生成产量工时/
			//查询检验单信息
			InsOrder insOrder = insOrderMapper.selectById(insSampleMapper.selectById(insProduct.getInsSampleId()).getInsOrderId());
			//校验如果这个人这个检测项目已经添加过了则不需要再新增
			//首先判断当前人的当前时间是否是排班时间内,如果不是就是加班
			LocalDateTime today = LocalDateTime.of(LocalDate.now(), LocalTime.MIDNIGHT);
			PerformanceShift performanceShift = performanceShiftMapper.selectOne(Wrappers.<PerformanceShift>lambdaQuery()
			.eq(PerformanceShift::getUserId, userId)
			.eq(PerformanceShift::getWorkTime, today));
			if (ObjectUtils.isNotEmpty(performanceShift)) {
			ShiftTime shiftTime = shiftTimeMapper.selectOne(Wrappers.<ShiftTime>lambdaQuery().eq(ShiftTime::getShift, performanceShift.getShift()));
			if (ObjectUtils.isNotEmpty(shiftTime)) {
			DateTimeFormatter forma = DateTimeFormatter.ofPattern("HH:mm");
			LocalTime now = LocalTime.now();
			LocalTime startTime = LocalTime.parse(shiftTime.getStartTime(), forma);
			LocalTime endTime = LocalTime.parse(shiftTime.getEndTime(), forma);
			// 检查当前时间是否在范围内（包括边界）
			boolean isWithinRange;
			if (endTime.isAfter(startTime)) {
			// 不跨天的情况
			isWithinRange = !now.isBefore(startTime) && !now.isAfter(endTime);
			} else {
			// 跨天的情况
			isWithinRange = !now.isBefore(startTime) \|\| !now.isAfter(endTime);
			}
			if (ObjectUtils.isNotEmpty(insProduct.getManHour())) {
			//先删后加(工时记录最后一次保存的时间)
			auxiliaryOutputWorkingHoursMapper.delete(Wrappers.<AuxiliaryOutputWorkingHours>lambdaQuery()
			.eq(AuxiliaryOutputWorkingHours::getInsProductId, insProduct.getId()));
			AuxiliaryOutputWorkingHours auxiliaryOutputWorkingHours = new AuxiliaryOutputWorkingHours();
			if (isWithinRange) {
			//在时间内就是正常上班
			auxiliaryOutputWorkingHours.setOrderNo(insOrder.getEntrustCode());//非加班委托单号
			auxiliaryOutputWorkingHours.setWorkTime(insProduct.getManHour());//非加班工时
			auxiliaryOutputWorkingHours.setAmount(1);//非加班数量
			auxiliaryOutputWorkingHours.setOutputWorkTime((ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getOvertimeWorkTime()) ? auxiliaryOutputWorkingHours.getOvertimeWorkTime() : 0) + (ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getWorkTime()) ? auxiliaryOutputWorkingHours.getWorkTime() : 0));//产量工时

			} else {
			//加班
			auxiliaryOutputWorkingHours.setOvertimeOrderNo(insOrder.getEntrustCode());//加班委托单号
			auxiliaryOutputWorkingHours.setOvertimeWorkTime(insProduct.getManHour());//加班工时
			auxiliaryOutputWorkingHours.setOvertimeAmount(1);//加班数量
			auxiliaryOutputWorkingHours.setOutputWorkTime((ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getOvertimeWorkTime()) ? auxiliaryOutputWorkingHours.getOvertimeWorkTime() : 0) + (ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getWorkTime()) ? auxiliaryOutputWorkingHours.getWorkTime() : 0));//产量工时
			}
			auxiliaryOutputWorkingHours.setInspectionItem(insProduct.getInspectionItem());//检测父项
			auxiliaryOutputWorkingHours.setInspectionItemSubclass(insProduct.getInspectionItemSubclass());//检测子项
			auxiliaryOutputWorkingHours.setSample(insSampleMapper.selectById(insProduct.getInsSampleId()).getSampleCode());//样品编号
			auxiliaryOutputWorkingHours.setManHourGroup(insProduct.getManHourGroup());//工时分组
			DateTimeFormatter formatter = DateTimeFormatter.ofPattern("yyyy-MM-dd");
			DateTimeFormatter formatters = DateTimeFormatter.ofPattern("yyyy-MM-dd HH:mm:ss");
			auxiliaryOutputWorkingHours.setDateTime(LocalDateTime.now().toLocalDate().atStartOfDay().format(formatters));//日期
			LocalDateTime localDateTime = LocalDateTime.now();
			DateTime parse = DateUtil.parse(localDateTime.format(formatter));
			auxiliaryOutputWorkingHours.setWeekDay(getWeek(localDateTime.format(formatters)));//星期
			auxiliaryOutputWorkingHours.setWeek(String.valueOf(DateUtil.weekOfYear(DateUtil.offsetDay(parse, 1))));//周次
			auxiliaryOutputWorkingHours.setCheck(userId);//检测人
			auxiliaryOutputWorkingHours.setInsProductId(insProduct.getId());//检验项目id
			auxiliaryOutputWorkingHoursMapper.insert(auxiliaryOutputWorkingHours);
			}
			}
			}
			InsSample insSample = insSampleMapper.selectById(insProductMapper.selectById(insProduct.getId()).getInsSampleId());
			insSample.setInsState(1);
			Long l = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			@@ -713,6 +660,7 @@
			insSampleMapper.updateById(insSample);
			/校验一下result表/
			List<InsProductResult> insProductResults = insProductResultMapper.selectList(Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getNum, num)
			.eq(InsProductResult::getInsProductId, insProduct.getId()));
			if (insProductResults.size() > 1) {
			for (int i = 1; i < insProductResults.size(); i++) {
			@@ -744,23 +692,30 @@
			//电路试验的保存检验内容
			@Override
			public List<Integer> saveInsContext2(InsProductResultDto insProductResultDtos) {
			if (ObjectUtils.isEmpty(insProductResultDtos.getFrequency())){
			if (ObjectUtils.isEmpty(insProductResultDtos.getFrequency())) {
			throw new ErrorException("频率不能为空");
			}
			Integer userId = getLook.selectPowerByMethodAndUserId(null).get("userId");
			//查询检验单信息
			InsOrder insOrder = insOrderMapper.selectById(insProductResultDtos.getOrderId());
			InsOrderState orderState = insOrderStateMapper.selectOne(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, insProductResultDtos.getOrderId())
			.eq(InsOrderState::getLaboratory, insProductResultDtos.getSonLaboratory())
			.orderByDesc(InsOrderState::getId)
			.last("LIMIT 1"));// 确保只取一条记录
			//查询样品信息
			InsSample insSample = insSampleMapper.selectById(insProductResultDtos.getSampleId());
			List<Integer> list = new ArrayList<>();
			/新增检验项目检验值记录表(采取先删后增)/
			insProductResult2Mapper.delete(Wrappers.<InsProductResult2>lambdaQuery()
			.in(InsProductResult2::getInsProductId, insProductResultDtos.getInsProductResult2s().stream().map(InsProductResult2::getInsProductId).distinct().collect(Collectors.toList()))
			.eq(InsProductResult2::getNum, orderState.getNum())
			.eq(InsProductResult2::getFrequency, insProductResultDtos.getFrequency()));
			for (InsProductResult2 insProductResult2 : insProductResultDtos.getInsProductResult2s()) {
			InsProduct insProduct = new InsProduct();
			insProduct.setId(insProductResult2.getInsProductId());//项目id
			InsProductResult2 result2 = new InsProductResult2();
			result2.setNum(orderState.getNum());
			result2.setInsProductId(insProductResult2.getInsProductId());
			//频率
			result2.setFrequency(insProductResultDtos.getFrequency());
			@@ -792,7 +747,9 @@
			int ressult = 1;
			String valueStr = insProductResult2.getValue();
			if (!insProduct.getAsk().contains(",")) {
			if (!isValueValid(valueStr, new String[]{insProduct.getAsk()})) {
			if (insProduct.getAsk().equals("/")) {
			ressult = 3; //不判定
			} else if (!isValueValid(valueStr, new String[]{insProduct.getAsk()})) {
			ressult = 0; //不合格
			}
			} else {
			@@ -803,7 +760,6 @@
			String[] askSplit = s.split("°");
			String angleKey = askSplit[0];
			String angleValue = askSplit[1];

			for (int i = 0; i < angles.length; i++) {
			if (angles[i].split("°")[0].equals(angleKey)) {
			try {
			@@ -818,11 +774,10 @@
			ressult = 0; // 不合格
			break;
			}
			}catch (Exception e) {
			}finally {
			} catch (Exception e) {
			} finally {
			continue;
			}

			}
			}
			}
			@@ -836,65 +791,6 @@
			insProduct.setUpdateUser(userId);
			insProductMapper.updateById(insProduct);
			insProductUserMapper.insert(new InsProductUser(null, userId, LocalDateTime.now(), insProduct.getId()));
			/生成产量工时/
			//校验如果这个人这个检测项目已经添加过了则不需要再新增
			//首先判断当前人的当前时间是否是排班时间内,如果不是就是加班
			LocalDateTime today = LocalDateTime.of(LocalDate.now(), LocalTime.MIDNIGHT);
			PerformanceShift performanceShift = performanceShiftMapper.selectOne(Wrappers.<PerformanceShift>lambdaQuery()
			.eq(PerformanceShift::getUserId, userId)
			.eq(PerformanceShift::getWorkTime, today));
			if (ObjectUtils.isNotEmpty(performanceShift)) {
			ShiftTime shiftTime = shiftTimeMapper.selectOne(Wrappers.<ShiftTime>lambdaQuery().eq(ShiftTime::getShift, performanceShift.getShift()));
			if (ObjectUtils.isNotEmpty(shiftTime)) {
			DateTimeFormatter forma = DateTimeFormatter.ofPattern("HH:mm");
			LocalTime now = LocalTime.now();
			LocalTime startTime = LocalTime.parse(shiftTime.getStartTime(), forma);
			LocalTime endTime = LocalTime.parse(shiftTime.getEndTime(), forma);
			// 检查当前时间是否在范围内（包括边界）
			boolean isWithinRange;
			if (endTime.isAfter(startTime)) {
			// 不跨天的情况
			isWithinRange = !now.isBefore(startTime) && !now.isAfter(endTime);
			} else {
			// 跨天的情况
			isWithinRange = !now.isBefore(startTime) \|\| !now.isAfter(endTime);
			}
			if (ObjectUtils.isNotEmpty(insProduct.getManHour())) {
			//先删后加(工时记录最后一次保存的时间)
			auxiliaryOutputWorkingHoursMapper.delete(Wrappers.<AuxiliaryOutputWorkingHours>lambdaQuery()
			.eq(AuxiliaryOutputWorkingHours::getInsProductId, insProduct.getId()));
			AuxiliaryOutputWorkingHours auxiliaryOutputWorkingHours = new AuxiliaryOutputWorkingHours();
			if (isWithinRange) {
			//在时间内就是正常上班
			auxiliaryOutputWorkingHours.setOrderNo(insOrder.getEntrustCode());//非加班委托单号
			auxiliaryOutputWorkingHours.setWorkTime(insProduct.getManHour());//非加班工时
			auxiliaryOutputWorkingHours.setAmount(1);//非加班数量
			auxiliaryOutputWorkingHours.setOutputWorkTime((ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getOvertimeWorkTime()) ? auxiliaryOutputWorkingHours.getOvertimeWorkTime() : 0) + (ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getWorkTime()) ? auxiliaryOutputWorkingHours.getWorkTime() : 0));//产量工时

			} else {
			//加班
			auxiliaryOutputWorkingHours.setOvertimeOrderNo(insOrder.getEntrustCode());//加班委托单号
			auxiliaryOutputWorkingHours.setOvertimeWorkTime(insProduct.getManHour());//加班工时
			auxiliaryOutputWorkingHours.setOvertimeAmount(1);//加班数量
			auxiliaryOutputWorkingHours.setOutputWorkTime((ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getOvertimeWorkTime()) ? auxiliaryOutputWorkingHours.getOvertimeWorkTime() : 0) + (ObjectUtils.isNotEmpty(auxiliaryOutputWorkingHours.getWorkTime()) ? auxiliaryOutputWorkingHours.getWorkTime() : 0));//产量工时
			}
			auxiliaryOutputWorkingHours.setInspectionItem(insProduct.getInspectionItem());//检测父项
			auxiliaryOutputWorkingHours.setInspectionItemSubclass(insProduct.getInspectionItemSubclass());//检测子项
			auxiliaryOutputWorkingHours.setSample(insSampleMapper.selectById(insProduct.getInsSampleId()).getSampleCode());//样品编号
			auxiliaryOutputWorkingHours.setManHourGroup(insProduct.getManHourGroup());//工时分组
			DateTimeFormatter formatter = DateTimeFormatter.ofPattern("yyyy-MM-dd");
			DateTimeFormatter formatters = DateTimeFormatter.ofPattern("yyyy-MM-dd HH:mm:ss");
			auxiliaryOutputWorkingHours.setDateTime(LocalDateTime.now().toLocalDate().atStartOfDay().format(formatters));//日期
			LocalDateTime localDateTime = LocalDateTime.now();
			DateTime parse = DateUtil.parse(localDateTime.format(formatter));
			auxiliaryOutputWorkingHours.setWeekDay(getWeek(localDateTime.format(formatters)));//星期
			auxiliaryOutputWorkingHours.setWeek(String.valueOf(DateUtil.weekOfYear(DateUtil.offsetDay(parse, 1))));//周次
			auxiliaryOutputWorkingHours.setCheck(userId);//检测人
			auxiliaryOutputWorkingHours.setInsProductId(insProduct.getId());//检验项目id
			auxiliaryOutputWorkingHoursMapper.insert(auxiliaryOutputWorkingHours);
			}
			}
			}
			/更新样品的检验状态/
			insSample.setInsState(1);
			Long l = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			@@ -921,6 +817,19 @@
			.set(InsOrderState::getInsState, 2));
			}
			return list;
			}

			//温湿度试验+功率试验的保存检验内容
			@Override
			public int saveInsContext3(InsProductResult insProductResult) {
			//先删后加
			insProductResultMapper.delete(Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getInsProductId, insProductResult.getInsProductId())
			.eq(InsProductResult::getNum, insProductResult.getNum()));
			insProductResult.setEquipValue("[{\"v\":\""+insProductResult.getEquipValue()+"\"}]");
			insProductResult.setEquipName("[{\"v\":\""+insProductResult.getEquipName()+"\"}]");
			insProductResultMapper.insert(insProductResult);
			return 0;
			}

			//解析要求值的格式
			@@ -995,12 +904,11 @@

			@Override
			@Transactional(rollbackFor = Exception.class)
			public int verifyPlan(Integer orderId, String laboratory, Integer type, String tell) {
			public int verifyPlan(Integer orderId, String laboratory, Integer type, String tell) throws IOException {
			LocalDateTime now = LocalDateTime.now();
			Integer userId = getLook.selectPowerByMethodAndUserId(null).get("userId");
			List<InsUnPass> insUnPasses = new ArrayList<>();
			/样品下的项目只要有一个项目不合格则检验结果为0,否则为1/
			//这里的insSamples是订单下的所有样品包括("/")
			List<InsSample> samples = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery().eq(InsSample::getInsOrderId, orderId));
			for (InsSample insSample : samples) {
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			@@ -1034,720 +942,65 @@
			}
			insUnPassService.saveBatch(insUnPasses);
			/type=0 再次试验; type=1 继续试验 ; type=2 结束试验/
			switch (type) {
			case 0:
			/再次试验:该单子退回到检验状态(排序改成当前的最后)；/
			//更新原来的检验任务
			// 查询根据 id 倒序排列的第一条记录
			InsOrderState record = insOrderStateMapper.selectOne(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.orderByDesc(InsOrderState::getId)
			.last("LIMIT 1")); // 确保只取一条记录
			if (record != null) {
			// 获取到第一条记录的 id 后，执行更新操作
			// 查询根据 id 倒序排列的第一条记录
			InsOrderState record = insOrderStateMapper.selectOne(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.orderByDesc(InsOrderState::getId)
			.last("LIMIT 1")); // 确保只取一条记录
			if (record != null) {
			//更新记录
			insOrderUserMapper.update(null, Wrappers.<InsOrderUser>lambdaUpdate()
			.eq(InsOrderUser::getInsOrderStateId, record.getId())
			.eq(InsOrderUser::getNum, record.getNum())
			.set(InsOrderUser::getTell, tell));
			switch (type) {
			case 0:
			//再次试验:该单子退回到检验状态(排序改成当前的最后),次数递增(保留以前的数据)；
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getId, record.getId())
			.set(InsOrderState::getInsTime, now)
			.set(InsOrderState::getInsState, 4)
			.set(InsOrderState::getVerifyTell, tell)
			.set(InsOrderState::getVerifyUser, userId)
			.set(InsOrderState::getNum, record.getNum() + 1)//次数加1
			.set(InsOrderState::getCreateTime, LocalDateTime.now()));
			}
			break;
			case 1:
			//继续试验:则继续将检验任务转接至下一站点；
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.set(InsOrderState::getInsTime, now)
			.set(InsOrderState::getInsState, 6)
			.set(InsOrderState::getVerifyTell, tell)
			.set(InsOrderState::getVerifyUser, userId));
			//转接至下一站点,需要先判断是否还有其余试验室,如果有其余试验室需要将订单下发
			List<InsSample> insSamples = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery()
			.eq(InsSample::getInsOrderId, orderId).select(InsSample::getId));
			List<Integer> ids = insSamples.stream().map(a -> a.getId()).collect(Collectors.toList());
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.in(InsProduct::getInsSampleId, ids)
			.eq(InsProduct::getState, 1));
			List<Integer> list = new ArrayList<>();
			list.add(4);
			list.add(5);
			list.add(6);
			List<InsOrderState> insOrderStates = insOrderStateMapper.selectList(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, orderId)
			.in(InsOrderState::getInsState, list));
			List<String> strings = insOrderStates.stream().map(InsOrderState::getLaboratory).distinct().collect(Collectors.toList());
			//除去当前复核的试验室和已经复核的试验室
			List<String> collect = insProducts.stream()
			.map(InsProduct::getSonLaboratory)
			.distinct()
			.filter(s -> !s.equals(laboratory))
			.filter(s -> !strings.contains(s))
			.collect(Collectors.toList());
			if (collect.size() > 0) {
			//要判断剩余试验室中哪个最空闲就安排给哪个
			Map<String, Long> dataCounts = new HashMap<>();
			for (String sonLaboratory : collect) {
			Long count = insOrderStateMapper.selectCount(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getLaboratory, sonLaboratory)
			.ne(InsOrderState::getInsState, 4)
			.ne(InsOrderState::getInsState, 5)
			.ne(InsOrderState::getInsState, 6));
			dataCounts.put(sonLaboratory, count);
			}
			// 查找数据量最少的元素
			String minElement = null;
			Long minCount = Long.MAX_VALUE;
			for (Map.Entry<String, Long> entry : dataCounts.entrySet()) {
			if (entry.getValue() < minCount) {
			minCount = entry.getValue();
			minElement = entry.getKey();
			break;
			case 1:
			//继续试验:该站点任务结束(可以再次扫码检验)；
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.set(InsOrderState::getInsState, 6)
			.set(InsOrderState::getVerifyTell, tell)
			.set(InsOrderState::getVerifyUser, userId));
			break;
			case 2:
			//结束试验:此委托单停止试验(无法再次检验)。
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.set(InsOrderState::getInsState, 5)
			.set(InsOrderState::getVerifyTell, tell)
			.set(InsOrderState::getVerifyUser, userId));
			//如果订单类型是原理样机,则该订单直接闭环
			InsOrder insOrder = insOrderMapper.selectById(orderId);
			if (insOrder.getFormType().equals("原理样机")) {
			for (InsSample sample : samples) {
			//出库
			try {
			outInsOrderState(laboratory, sample.getSampleCode());
			} catch (Exception e) {

			}
			}
			insOrder.setState(4);
			insOrderMapper.updateById(insOrder);
			}
			InsOrderState insOrderState = new InsOrderState();
			insOrderState.setInsOrderId(orderId);
			insOrderState.setLaboratory(minElement);
			insOrderState.setInsState(0);
			insOrderStateMapper.insert(insOrderState);
			} else {
			//如果继续试验没有其他站点的检验任务那就结束试验
			verifyPlan(orderId, laboratory, 2, tell);
			}
			break;
			case 2:
			//结束试验:此委托单停止试验，直接生成最终报告和费用统计。
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.set(InsOrderState::getInsTime, now)
			.set(InsOrderState::getInsState, 5)
			.set(InsOrderState::getVerifyTell, tell)
			.set(InsOrderState::getVerifyUser, userId));
			/生成报告/
			generateReport(orderId);
			break;
			break;
			}
			}
			return 1;
			}

			//生成报告
			private void generateReport(Integer orderId) {
			LocalDateTime now = LocalDateTime.now();
			InsOrder insOrder = insOrderMapper.selectById(orderId);
			Map<String, String> user = insProductMapper.selectUserById(insOrder.getUserId());
			//samples是过滤掉没有检验项目的样品
			List<SampleProductDto> samples = insSampleMapper.selectSampleProductListByOrderId(orderId);
			InsReport insReport = new InsReport();
			insReport.setCode(insOrder.getEntrustCode());
			insReport.setInsOrderId(orderId);
			List<Map<String, Object>> tables = new ArrayList<>();
			Set<String> standardMethod = new HashSet<>();
			Set<String> deviceSet = new HashSet<>();
			Set<String> models = new HashSet<>();
			AtomicReference<Integer> productSize = new AtomicReference<>(0);
			String[] monthNames = {"January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"};
			AtomicReference<String> resultCh = new AtomicReference<>("");
			AtomicReference<String> resultEn = new AtomicReference<>("");
			/基础报告(7列)/
			samples.forEach(a -> {
			Set<Integer> set = new HashSet<>();
			Map<Integer, String> map2 = new HashMap<>();
			Long productCount = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery().eq(InsProduct::getInsSampleId, a.getId()));
			productSize.set(productSize.get() + Integer.parseInt(productCount + ""));
			models.add(a.getModel());
			standardMethod.add(baseMapper.getStandardMethodCode(a.getStandardMethodListId()));
			getTemplateThing(set, map2, a.getInsProduct());
			for (InsProduct b : a.getInsProduct()) {
			if (b.getInsProductResult() != null) {
			List<JSONObject> jsonObjects = JSON.parseArray(b.getInsProductResult().getEquipValue(), JSONObject.class);
			for (JSONObject jsonObject : jsonObjects) {
			if (!"".equals(jsonObject.get("v") + "")) {
			deviceSet.add(jsonObject.get("v") + "");
			}
			}
			}
			}
			AtomicInteger index = new AtomicInteger();
			Set<String> itemSet = new HashSet<>();
			List<RowRenderData> rows = new ArrayList<>();
			//表格的行数
			for (int i = 0; i < 3 + a.getInsProduct().size(); i++) {
			RowRenderData rowRenderData = new RowRenderData();
			RowStyle rowStyle = new RowStyle();
			rowStyle.setHeight(40);
			rowRenderData.setRowStyle(rowStyle);
			List<CellRenderData> cells = new ArrayList<>();
			if (i >= 2 && i < 2 + a.getInsProduct().size()) {
			if (itemSet.add(a.getInsProduct().get(i - 2).getInspectionItem())) {
			index.getAndIncrement();
			}
			}
			//列数
			for (int j = 0; j < 7; j++) {
			CellRenderData cellRenderData = new CellRenderData();
			CellStyle cellStyle = new CellStyle();
			cellStyle.setVertAlign(XWPFTableCell.XWPFVertAlign.CENTER);
			cellRenderData.setCellStyle(cellStyle);
			List<ParagraphRenderData> paragraphRenderDataList = new ArrayList<>();
			ParagraphRenderData paragraphRenderData = new ParagraphRenderData();
			ParagraphStyle paragraphStyle = new ParagraphStyle();
			paragraphStyle.setAlign(ParagraphAlignment.CENTER);
			paragraphRenderData.setParagraphStyle(paragraphStyle);
			List<RenderData> renderData = new ArrayList<>();
			TextRenderData textRenderData = new TextRenderData();
			Style style = new Style();
			style.setFontFamily("宋体");
			style.setColor("000000");
			textRenderData.setStyle(style);
			if (i == 0) {
			//第一行
			if (j == 0 \|\| j == 1) {
			//第一列和第二列
			textRenderData.setText("样品编号@Sample number∑1");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2 \|\| j == 3) {
			//第三列和第四列
			textRenderData.setText(a.getSampleCode() + "∑2");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("规格型号@Type");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//第六列和第七列
			textRenderData.setText(a.getModel() + "∑3");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			} else if (i == 1) {
			//第二行
			if (j == 0) {
			//第一列
			textRenderData.setText("序号@No.");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1 \|\| j == 2) {
			//第二列和第三列
			textRenderData.setText("检测项目@Testing item∑4");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText("单位@Unit");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("标准要求@Requirement");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 5) {
			//第六列
			textRenderData.setText("检验结果@Test result");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//第七列
			textRenderData.setText("结论@Conclusion");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			} else if (i == 2 + a.getInsProduct().size()) {
			//最后一行
			if (j == 0 \|\| j == 1) {
			//第一列和第二列
			textRenderData.setText("备注∑5");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			textRenderData.setText("“√”表示项目合格，“×”表示项目不合格。@“√” indicates test item is qualified,“×” indicates test item is not qualified ∑6");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			} else {
			//其余行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			if (ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getInspectionItemSubclass())) {
			if (ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getInspectionItemEn())) {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItem() + "@" + a.getInsProduct().get(i - 2).getInspectionItemEn() + "∑3" + index);
			} else {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItem() + "∑3" + index);
			}
			} else {
			if (ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getInspectionItemEn())) {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItem() + "@" + a.getInsProduct().get(i - 2).getInspectionItemEn() + "∑3" + index);
			} else {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItem() + "∑3" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			if (ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getInspectionItemSubclass())) {
			if (ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getInspectionItemSubclassEn())) {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItemSubclass() + "@" + a.getInsProduct().get(i - 2).getInspectionItemSubclassEn());
			} else {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItemSubclass());
			}
			} else {
			if (ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getInspectionItemEn())) {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItem() + "@" + a.getInsProduct().get(i - 2).getInspectionItemEn() + "∑3" + index);
			} else {
			textRenderData.setText(a.getInsProduct().get(i - 2).getInspectionItem() + "∑3" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(ObjectUtil.isNotEmpty(a.getInsProduct().get(i - 2).getUnit()) ? a.getInsProduct().get(i - 2).getUnit() : "");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText(a.getInsProduct().get(i - 2).getTell());
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 5) {
			//第六列
			textRenderData.setText(a.getInsProduct().get(i - 2).getLastValue());
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//第七列
			if (ObjectUtils.isEmpty(a.getInsProduct().get(i - 2).getInsResult())) {
			textRenderData.setText("-");
			} else if (a.getInsProduct().get(i - 2).getInsResult() == 1) {
			textRenderData.setText("√");
			} else if (a.getInsProduct().get(i - 2).getInsResult() == 0) {
			textRenderData.setText("×");
			} else {
			textRenderData.setText("-");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			}
			}
			TableRenderData tableRenderData = new TableRenderData();
			tableRenderData.setRows(rows);

			List<TableRenderData> tables1 = new ArrayList<>();
			tableRenderData.setRows(new ArrayList<>());
			int totalHeight = 0;
			int pageHeightLimit = 450; // 假设每页的高度限制为500单位
			int rowHeight = 0;
			List<RowRenderData> firstTwoRows = new ArrayList<>(); // 保存前两行以便复制到新表格
			List<RowRenderData> endRows = new ArrayList<>(); // 保存最后一行备注以便复制到新表格
			// 保存前两行以便复制到新表格
			if (rows.size() >= 3) {
			firstTwoRows.add(rows.get(0));
			firstTwoRows.add(rows.get(1));
			endRows.add(rows.get(rows.size() - 1));
			}
			for (RowRenderData row : rows) {
			rowHeight = calculateRowHeight(row); // 自定义方法计算行高
			if (totalHeight + rowHeight > pageHeightLimit) {
			tableRenderData.getRows().addAll(endRows);
			// 创建新表格并复制前两行
			TableRenderData newTableRenderData = new TableRenderData();
			newTableRenderData.setRows(new ArrayList<>(firstTwoRows));
			//设置样式
			TableStyle tableStyle = new TableStyle();
			tableStyle.setColWidths(new int[]{650, 1600, 2000, 750, 2800, 1100, 1100});
			tableStyle.setWidth("10000");
			tableStyle.setAlign(TableRowAlign.CENTER);
			BorderStyle borderStyle = new BorderStyle();
			borderStyle.setColor("000000");
			borderStyle.setType(XWPFTable.XWPFBorderType.THICK);
			borderStyle.setSize(14);
			tableStyle.setLeftBorder(borderStyle);
			tableStyle.setTopBorder(borderStyle);
			tableStyle.setRightBorder(borderStyle);
			tableStyle.setBottomBorder(borderStyle);
			tableRenderData.setTableStyle(tableStyle);
			newTableRenderData.setTableStyle(tableStyle);
			tables1.add(tableRenderData);
			tableRenderData = newTableRenderData;
			totalHeight = 0;
			}
			totalHeight += rowHeight;
			tableRenderData.getRows().add(row);
			}
			if (!tableRenderData.getRows().isEmpty()) {
			//设置样式
			TableStyle tableStyle = new TableStyle();
			tableStyle.setColWidths(new int[]{650, 1600, 2000, 750, 2800, 1100, 1100});
			tableStyle.setWidth("10000");
			tableStyle.setAlign(TableRowAlign.CENTER);
			BorderStyle borderStyle = new BorderStyle();
			borderStyle.setColor("000000");
			borderStyle.setType(XWPFTable.XWPFBorderType.THICK);
			borderStyle.setSize(14);
			tableStyle.setLeftBorder(borderStyle);
			tableStyle.setTopBorder(borderStyle);
			tableStyle.setRightBorder(borderStyle);
			tableStyle.setBottomBorder(borderStyle);
			tableRenderData.setTableStyle(tableStyle);
			tables1.add(tableRenderData);
			}
			tables1.forEach(table -> {
			Map<String, Object> tableMap = new HashMap<>();
			tableMap.put("table", table);
			tableMap.put("report", insReport);
			tables.add(tableMap);
			});
			});

			String url;
			try {
			InputStream inputStream = this.getClass().getResourceAsStream("/static/report-template.docx");
			File file = File.createTempFile("temp", ".tmp");
			OutputStream outputStream = new FileOutputStream(file);
			IOUtils.copy(inputStream, outputStream);
			url = file.getAbsolutePath();
			} catch (FileNotFoundException e) {
			throw new ErrorException("找不到模板文件");
			} catch (IOException e) {
			throw new RuntimeException(e);
			}
			StringBuilder standardMethod2 = new StringBuilder();
			for (String s : standardMethod) {
			standardMethod2.append("、").append(s);
			}
			standardMethod2.replace(0, 1, "");
			tables.forEach(table -> {
			table.put("tableSize", tables.size() + 1);
			});
			List<Map<String, String>> deviceList = null;
			if (deviceSet.size() != 0) {
			deviceList = insOrderMapper.selectDeviceList(deviceSet);
			}
			Map<String, String> codeStr = new HashMap<>();
			codeStr.put("报告编号", insReport.getCode());
			codeStr.put("样品名称", insOrder.getSample());
			codeStr.put("规格型号", samples.get(0).getModel());
			codeStr.put("发放日期", now.format(DateTimeFormatter.ofPattern("yyyy-MM-dd")));
			String codePath;
			try {
			codePath = new MatrixToImageWriter().code(JackSonUtil.marshal(codeStr).replaceAll("\\{", "")
			.replaceAll("}", "").replaceAll(",", "").replaceAll("\"", ""), twoCode);
			} catch (Exception e) {
			throw new RuntimeException(e);
			}
			String modelStr = "";
			for (String model : models) {
			modelStr += "," + model;
			}
			String finalModelStr = modelStr;
			String sampleEn = insSampleMapper.getSampleEn(insOrder.getSample());
			String orderType = insOrderMapper.getEnumLabelByValue(insOrder.getOrderType());
			String formType = insOrderMapper.getEnumLabelByValue(insOrder.getFormType());
			ConfigureBuilder builder = Configure.builder();
			builder.useSpringEL(true);
			List<Map<String, String>> finalDeviceList = deviceList;
			Integer userId = insSampleUserMapper.selectOne(Wrappers.<InsSampleUser>lambdaQuery()
			.eq(InsSampleUser::getInsSampleId, orderId).last("limit 1")).getUserId();
			String signatureUrl;
			try {
			signatureUrl = userMapper.selectById(userId).getSignatureUrl();
			} catch (Exception e) {
			throw new ErrorException("找不到检验人的签名");
			}
			if (ObjectUtils.isEmpty(signatureUrl) \|\| signatureUrl.equals("")) {
			throw new ErrorException("找不到检验人的签名");
			}
			Custom custom = customMapper.selectById(insOrder.getCompanyId());
			if (!resultCh.get().equals("")) {
			resultCh.set("依据委托要求，" + resultCh.get().replaceFirst("、", "") + "等所检项目不符合要求，其余所检项目均符合要求。");
			resultEn.set("According to commissioned requirements," + resultEn.get().replaceFirst("、", "") + " these inspected items do not meet the requirements, all other inspected items meet the requirements.");
			} else {
			resultCh.set("依据委托要求，所检项目均符合要求。");
			resultEn.set("According to commissioned requirements, all the tested items meet the requirements.");
			}

			/获取附件图片类型/
			List<Map<String, Object>> images = new ArrayList<>();
			List<InsOrderFile> insOrderFiles = insOrderFileMapper.selectList(Wrappers.<InsOrderFile>lambdaQuery().eq(InsOrderFile::getType, 1).eq(InsOrderFile::getInsOrderId, orderId));
			if (CollectionUtils.isNotEmpty(insOrderFiles)) {
			insOrderFiles.forEach(insOrderFile -> {
			Map<String, Object> image = new HashMap<>();
			PictureRenderData pictureRenderData = Pictures.ofLocal(imgUrl + "/" + insOrderFile.getFileUrl()).sizeInCm(17, 20).create();
			image.put("url", pictureRenderData);
			image.put("report", insReport);
			images.add(image);
			});
			}
			//委托人和电话字段判断
			if (ObjectUtils.isEmpty(insOrder.getPrepareUser())) {
			insOrder.setPrepareUser("/");
			}
			if (ObjectUtils.isEmpty(insOrder.getPhone())) {
			insOrder.setPhone("/");
			}
			//检验项目的环境
			InsProduct insProduct = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery().eq(InsProduct::getState, 1).eq(InsProduct::getInsSampleId, samples.get(0).getId())).get(0);
			String environment = "";
			environment = (ObjectUtils.isNotEmpty(insProduct.getTemperature()) ? insProduct.getTemperature() + "℃ " : "") + (ObjectUtils.isNotEmpty(insProduct.getHumidity()) ? insProduct.getHumidity() + "%" : "");
			String finalEnvironment = environment;
			XWPFTemplate template = XWPFTemplate.compile(url, builder.build()).render(
			new HashMap<String, Object>() {{
			put("order", insOrder);
			put("report", insReport);
			put("environment", finalEnvironment);
			put("custom", custom);
			put("sampleSize", samples.size());
			put("tables", tables);
			put("tableSize", tables.size() + 1);
			put("standardMethod", (standardMethod2.toString().equals("null") ? "" : standardMethod2));
			put("deviceList", finalDeviceList);
			put("twoCode", Pictures.ofLocal(codePath).create());
			put("models", finalModelStr.replace(",", ""));
			put("productSize", productSize);
			put("createTime", now.format(DateTimeFormatter.ofPattern("yyyy年MM月dd日")));
			put("createTimeEn", monthNames[now.getMonthValue() - 1] + " " + now.getDayOfMonth() + ", " + now.getYear());
			put("insTime", insOrder.getInsTime().format(DateTimeFormatter.ofPattern("yyyy年MM月dd日")));
			put("insTimeEn", monthNames[insOrder.getInsTime().getMonthValue() - 1] + " " + insOrder.getInsTime().getDayOfMonth() + ", " + insOrder.getInsTime().getYear());
			put("writeUrl", null);
			put("insUrl", Pictures.ofLocal(imgUrl + "/" + signatureUrl).create());
			put("images", images);
			put("examineUrl", null);
			put("ratifyUrl", null);
			put("sampleEn", sampleEn);
			put("orderType", orderType);
			put("getTime", insOrder.getExamineTime().format(DateTimeFormatter.ofPattern("yyyy年MM月dd日")));
			put("getTimeEn", monthNames[insOrder.getExamineTime().getMonthValue() - 1] + " " + insOrder.getExamineTime().getDayOfMonth() + ", " + insOrder.getExamineTime().getYear());
			put("seal1", null);
			put("seal2", null);
			put("formTypeCh", formType);
			put("formTypeEn", insOrder.getFormType());
			put("resultCh", resultCh.get());
			put("resultEn", resultEn.get());
			}});
			try {
			String name = insReport.getCode().replace("/", "") + ".docx";
			template.writeAndClose(Files.newOutputStream(Paths.get(wordUrl + "/" + name)));
			insReport.setUrl("/word/" + name);
			insReportMapper.insert(insReport);
			insOrder.setInsState(5);
			insOrderMapper.updateById(insOrder);
			} catch (IOException e) {
			throw new RuntimeException(e);
			}
			// 处理合并单元格的问题
			String path = wordUrl + "/" + insReport.getCode().replace("/", "") + ".docx";
			try {
			FileInputStream stream = new FileInputStream(path);
			XWPFDocument document = new XWPFDocument(stream);
			List<XWPFTable> xwpfTables = document.getTables();
			for (int i = 1; i < xwpfTables.size() - (deviceList == null ? 1 : 2); i++) {
			Set<String> set1 = new HashSet<>();
			Map<String, Map<String, Integer>> maps = new HashMap<>();
			for (int j = 0; j < xwpfTables.get(i).getRows().size(); j++) {
			for (int k = 0; k < xwpfTables.get(i).getRows().get(j).getTableCells().size(); k++) {
			if (xwpfTables.get(i).getRows().get(j).getTableCells().get(k).getText().indexOf("∑") > -1) {
			String[] split = xwpfTables.get(i).getRows().get(j).getTableCells().get(k).getText().split("∑");
			if (set1.add(split[1])) {
			Map<String, Integer> map = new HashMap<>();
			map.put("sr", j);
			map.put("sc", k);
			map.put("er", j + 0);
			map.put("ec", k + 0);
			maps.put(split[1], map);
			} else {
			Map<String, Integer> map1 = maps.get(split[1]);
			if (j == map1.get("sr")) {
			map1.put("ec", map1.get("ec") + 1);
			} else if (k == map1.get("sc")) {
			map1.put("er", map1.get("er") + 1);
			}
			}
			String str = xwpfTables.get(i).getRows().get(j).getTableCells().get(k).getText().split("∑")[0];
			xwpfTables.get(i).getRows().get(j).getTableCells().get(k).removeParagraph(0);
			xwpfTables.get(i).getRows().get(j).getTableCells().get(k).setText(str);
			xwpfTables.get(i).getRows().get(j).getTableCells().get(k).setVerticalAlignment(XWPFTableCell.XWPFVertAlign.CENTER);
			xwpfTables.get(i).getRows().get(j).getTableCells().get(k).getParagraphArray(0).setAlignment(ParagraphAlignment.CENTER);
			}
			}
			}
			List<String> list = new ArrayList<>();
			for (String s : maps.keySet()) {
			list.add(s);
			}
			for (int a = list.size() - 1; a >= 0; a--) {
			Map<String, Integer> v = maps.get(list.get(a));
			for (int j = 0; j < v.get("er") - v.get("sr") + 1; j++) {
			if (v.get("ec") > v.get("sc")) {
			try {
			TableTools.mergeCellsHorizonal(xwpfTables.get(i), v.get("sr") + j, v.get("sc"), v.get("ec"));
			} catch (Exception e) {
			}
			}
			}
			if (v.get("er") > v.get("sr")) {
			try {
			TableTools.mergeCellsVertically(xwpfTables.get(i), v.get("sc"), v.get("sr"), v.get("er"));
			} catch (Exception e) {
			}
			}
			}
			}
			FileOutputStream fileOutputStream = new FileOutputStream(path);
			document.write(fileOutputStream);
			fileOutputStream.close();
			} catch (FileNotFoundException e) {
			throw new RuntimeException(e);
			} catch (IOException e) {
			throw new RuntimeException(e);
			}
			//处理中英文换行的问题
			try {
			FileInputStream stream1 = new FileInputStream(path);
			XWPFDocument document1 = new XWPFDocument(stream1);
			List<XWPFTable> xwpfTables1 = document1.getTables();
			for (int i = 1; i < xwpfTables1.size() - (deviceList == null ? 1 : 2); i++) {
			for (int j = 0; j < xwpfTables1.get(i).getRows().size(); j++) {
			for (int k = 0; k < xwpfTables1.get(i).getRows().get(j).getTableCells().size(); k++) {
			if (xwpfTables1.get(i).getRows().get(j).getTableCells().get(k).getText().contains("@")) {
			String text = xwpfTables1.get(i).getRows().get(j).getTableCells().get(k).getText();
			String[] split = text.split("@");
			xwpfTables1.get(i).getRows().get(j).getTableCells().get(k).removeParagraph(0);
			XWPFParagraph xwpfParagraph = xwpfTables1.get(i).getRows().get(j).getTableCells().get(k).addParagraph();
			XWPFRun run = xwpfParagraph.createRun();
			run.setText(split[0]);
			if (ObjectUtils.isNotNull(split[1])) {
			run.addBreak();
			run.setText(split[1]);
			}
			xwpfParagraph.setAlignment(ParagraphAlignment.CENTER);
			}
			}
			}
			}
			FileOutputStream fileOutputStream1 = new FileOutputStream(path);
			document1.write(fileOutputStream1);
			fileOutputStream1.close();
			} catch (FileNotFoundException e) {
			throw new RuntimeException(e);
			} catch (IOException e) {
			throw new RuntimeException(e);
			}
			}


			// 计算行高的方法
			private int calculateRowHeight(RowRenderData rowRenderData) {
			// 实现计算逻辑，可能需要根据单元格内容和字体等参数进行计算
			int height = 0;
			for (CellRenderData cell : rowRenderData.getCells()) {
			int cellHeight = estimateCellHeight(cell); // 根据内容估算单元格高度
			if (cellHeight > height) {
			height = cellHeight;
			}
			}
			return height;
			}

			//根据单元格的文本内容计算实际行高
			private int estimateCellHeight(CellRenderData cellRenderData) {
			// 假设默认行高是40
			int defaultHeight = 40;
			// 获取单元格中的所有段落
			List<ParagraphRenderData> paragraphs = cellRenderData.getParagraphs();
			int estimatedHeight = 0;
			// 遍历段落，估算每个段落的高度
			for (ParagraphRenderData paragraph : paragraphs) {
			List<RenderData> contents = paragraph.getContents();
			for (RenderData content : contents) {
			if (content instanceof TextRenderData) {
			TextRenderData text = (TextRenderData) content;
			Style style = text.getStyle();
			// 假设每行文本的高度为字体大小的1.2倍
			Double fontSize = Objects.isNull(style.getFontSize()) ? 12.0 : style.getFontSize();
			int lines = (int) Math.ceil(text.getText().length() / 15.0); // 假设每行约15个字符
			int textHeight = (int) (fontSize * 1.2 * lines);
			// 累加段落的高度
			estimatedHeight += textHeight;
			}
			}
			}
			// 返回最大值，确保高度不低于默认高度
			return Math.max(estimatedHeight, defaultHeight);
			}

			private void getTemplateThing(Set<Integer> set, Map<Integer, String> map2, List<InsProduct> insProducts) {
			@@ -1776,27 +1029,39 @@
			}

			@Override
			public int submitPlan(Integer orderId, String laboratory, Integer verifyUser, String entrustCode) {
			List<InsSample> insSamples = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery().eq(InsSample::getInsOrderId, orderId).select(InsSample::getId));
			public int submitPlan(SubmitPlanDto submitPlanDto) {
			List<InsSample> insSamples = insSampleMapper.selectList(Wrappers.<InsSample>lambdaQuery()
			.eq(InsSample::getInsOrderId, submitPlanDto.getOrderId()).select(InsSample::getId));
			InsOrderState orderState = insOrderStateMapper.selectOne(Wrappers.<InsOrderState>lambdaQuery()
			.eq(InsOrderState::getInsOrderId, submitPlanDto.getOrderId())
			.eq(InsOrderState::getLaboratory, submitPlanDto.getLaboratory())
			.orderByDesc(InsOrderState::getId)
			.last("LIMIT 1"));// 确保只取一条记录
			/记录检验任务每次的备注信息/
			InsOrderUser insOrderUser = new InsOrderUser();
			insOrderUser.setInsOrderStateId(orderState.getId());
			insOrderUser.setSubmitUser(getLook.selectPowerByMethodAndUserId(null).get("userId"));
			insOrderUser.setSubmitTime(LocalDateTime.now());
			insOrderUser.setNum(orderState.getNum());
			insOrderUser.setNote(ObjectUtils.isNotEmpty(submitPlanDto.getNote()) ? submitPlanDto.getNote() : null);
			insOrderUser.setTerm(ObjectUtils.isNotEmpty(submitPlanDto.getTerm()) ? submitPlanDto.getTerm() : null);
			insOrderUserMapper.insert(insOrderUser);
			List<Integer> ids = insSamples.stream().map(a -> a.getId()).collect(Collectors.toList());
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.in(InsProduct::getInsSampleId, ids)
			.eq(InsProduct::getSonLaboratory, laboratory)
			.eq(InsProduct::getSonLaboratory, submitPlanDto.getLaboratory())
			.eq(InsProduct::getState, 1)
			.and(wrapper -> wrapper
			.isNull(InsProduct::getInsResult)
			.or()
			.eq(InsProduct::getInsResult, 2)
			)
			.isNull(InsProduct::getInsFiberId)
			.isNull(InsProduct::getInsFibersId));
			insProducts.addAll(insProductMapper.selectFiberInsProduct(ids, laboratory));
			));
			if (insProducts.size() > 0) {
			String str = "";
			int count = 0;
			for (InsProduct product : insProducts) {
			//辐射试验检测的检验项目,不需要去手动填写检验值,只需要上传表格文件就可以了,后台提交的时候校验跳过这个检验项目
			if (product.getInspectionItem().equals("辐射试验检测")) {
			//辐射试验,温湿度试验,功率试验的检验项目,不需要去手动填写检验值,只需要上传表格文件就可以了,后台提交的时候校验跳过这个检验项目
			if (product.getInspectionItem().equals("辐射试验") \|\| product.getInspectionItem().equals("温湿度试验") \|\| product.getInspectionItem().equals("功率试验")) {
			product.setInsResult(3);//不判定
			insProductMapper.updateById(product);
			continue;
			@@ -1804,6 +1069,7 @@
			//电路试验的检验项目,需要在提交的时候再去赋值合格与不合格
			if (product.getInspectionItem().equals("电路试验")) {
			List<Integer> collect = insProductResult2Mapper.selectList(Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getNum, orderState.getNum())
			.eq(InsProductResult2::getInsProductId, product.getId())).stream().map(InsProductResult2::getResult).distinct().collect(Collectors.toList());
			if (collect.contains(0)) {
			product.setInsResult(0);//不合格
			@@ -1821,82 +1087,118 @@
			}
			}
			insOrderStateMapper.update(null, Wrappers.<InsOrderState>lambdaUpdate()
			.eq(InsOrderState::getInsOrderId, orderId)
			.eq(InsOrderState::getLaboratory, laboratory)
			.set(InsOrderState::getInsTime, LocalDateTime.now())
			.eq(InsOrderState::getInsOrderId, submitPlanDto.getOrderId())
			.eq(InsOrderState::getLaboratory, submitPlanDto.getLaboratory())
			.set(InsOrderState::getInsState, 3)
			.set(InsOrderState::getVerifyUser, verifyUser));
			/如果是C类订单且是下发到质量部,则直接复核通过(结束试验)/
			InsOrder insOrder = insOrderMapper.selectById(orderId);
			if (insOrder.getOrderType().equals("C") && insOrder.getDepartmentLims().equals("质量部")) {
			verifyPlan(orderId, laboratory, 2, null);
			} else {
			Integer userId = getLook.selectPowerByMethodAndUserId(null).get("userId");
			//LIMS系统消息推送
			InformationNotification info = new InformationNotification();
			info.setCreateUser(insProductMapper.selectUserById(userId).get("name"));
			info.setMessageType("2");
			info.setTheme("复核通知");
			info.setContent("您有一条检验任务待复核消息");
			info.setSenderId(userId);
			info.setConsigneeId(verifyUser);
			info.setViewStatus(false);
			info.setJumpPath("b1-inspect-order-plan");
			informationNotificationService.addInformationNotification(info);
			//todo 企业微信消息推送@zss
			/* HashMap<String, Object> map = new HashMap<>();
			.set(InsOrderState::getVerifyUser, submitPlanDto.getVerifyUser()));
			InsOrder insOrder = insOrderMapper.selectById(submitPlanDto.getOrderId());
			/这个情况先关闭----如果是C类订单且是下发到质量部,则直接复核通过(结束试验)/
			// if (insOrder.getOrderType().equals("C") && insOrder.getDepartmentLims().equals("质量部")) {
			// try {
			// verifyPlan(orderId, laboratory, 2, null);
			// } catch (IOException e) {
			// e.printStackTrace();
			// }
			// } else {
			Integer userId = getLook.selectPowerByMethodAndUserId(null).get("userId");
			//LIMS系统消息推送
			InformationNotification info = new InformationNotification();
			info.setCreateUser(insProductMapper.selectUserById(userId).get("name"));
			info.setMessageType("2");
			info.setTheme("复核通知");
			info.setContent("您有一条检验任务待复核消息");
			info.setSenderId(userId);
			info.setConsigneeId(submitPlanDto.getVerifyUser());
			info.setViewStatus(false);
			info.setJumpPath("b1-inspect-order-plan");
			informationNotificationService.addInformationNotification(info);
			// todo 企业微信消息推送@zss
			/*HashMap<String, Object> map = new HashMap<>();
			String account = userMapper.selectById(userId).getAccount();
			map.put("touser", //account//"ZT-012117");//接收消息成员的账号'ZT-031292'这种类型(如果有多个用'\|'分隔)
			map.put("touser", account);//接收消息成员的账号'ZT-031292'这种类型(如果有多个用'\|'分隔)
			map.put("toparty", "");//接收部门id
			map.put("totag", "");//消息标签id
			map.put("msgtype", "text");//消息类型 text:文本
			map.put("agentid", 1000513);//应用id
			map.put("agentid", 1000517);//应用id
			HashMap<String, Object> hashMap = new HashMap<>();
			hashMap.put("content", "您有一条检验任务待复核消息,请前往LIMS系统查看。<a href=\"http://10.1.13.77/enter\"> </a>");
			map.put("text", JSONArray.toJSONString(hashMap));//消息内容
			hashMap.put("content", "您有一条检验任务待复核消息,订单号是："+insOrder.getEntrustCode()+",请前往LIMS系统查看。<a href=\"https://ztwxlims.ztt.cn:7443/enter\">中天通信LIMS系统 </a>");
			map.put("text", hashMap);//消息内容
			map.put("safe", 0);//是否保密消息.0否
			map.put("enable_id_trans", 0);//是否开启id转译.0否
			map.put("enable_duplicate_check", 0);//是否开启重复消息检查.0否
			qywxApi.send(map);*/
			}
			// }
			//复核人--检验单相关负责人
			InsSampleUser insSampleUser = new InsSampleUser();
			insSampleUser.setUserId(verifyUser);
			insSampleUser.setInsSampleId(orderId);
			insSampleUser.setUserId(submitPlanDto.getVerifyUser());
			insSampleUser.setInsSampleId(submitPlanDto.getOrderId());
			insSampleUser.setState(1);
			insSampleUser.setSonLaboratory(laboratory);
			insSampleUser.setSonLaboratory(submitPlanDto.getLaboratory());
			insSampleUserMapper.insert(insSampleUser);
			/校验一下result表/
			CompletableFuture.supplyAsync(() -> {
			List<Integer> ips = insProducts.stream().map(InsProduct::getId).distinct().collect(Collectors.toList());
			for (Integer ip : ips) {
			List<InsProductResult> insProductResults = insProductResultMapper.selectList(Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getInsProductId, ip));
			if (insProductResults.size() > 1) {
			for (int i = 1; i < insProductResults.size(); i++) {
			insProductResultMapper.deleteById(insProductResults.get(i));
			/生成电路试验的站点报告并上传到附件中/
			if (submitPlanDto.getLaboratory().equals("电路试验")) {
			wordUtils.generateWord(submitPlanDto.getTerm(), orderState);
			//todo 电路站点报告正式库部署放开
			/*try {
			wordUtils.generateWord(submitPlanDto.getTerm(), orderState);
			} catch (Exception e) {
			throw new ErrorException("电路试验的站点报告生成有误,请联系开发人员调整!");
			}*/
			}
			/*// 删除数采采集次数
			String key = "frequency" + ":" + submitPlanDto.getEntrustCode() + ":*";
			RedisUtil.delsLike(key);*/

			/生成产量工时/
			//校验如果这个人这个检测项目已经添加过了则不需要再新增
			//首先判断当前人的当前时间是否是排班时间内,如果不是就是加班
			LocalDateTime today = LocalDateTime.of(LocalDate.now(), LocalTime.MIDNIGHT);
			PerformanceShift performanceShift = performanceShiftMapper.selectOne(Wrappers.<PerformanceShift>lambdaQuery()
			.eq(PerformanceShift::getUserId, userId)
			.eq(PerformanceShift::getWorkTime, today));
			if (ObjectUtils.isNotEmpty(performanceShift)) {
			ShiftTime shiftTime = shiftTimeMapper.selectOne(Wrappers.<ShiftTime>lambdaQuery().eq(ShiftTime::getShift, performanceShift.getShift()));
			if (ObjectUtils.isNotEmpty(shiftTime)) {
			DateTimeFormatter forma = DateTimeFormatter.ofPattern("HH:mm");
			LocalTime now = LocalTime.now();
			LocalTime startTime = LocalTime.parse(shiftTime.getStartTime(), forma);
			LocalTime endTime = LocalTime.parse(shiftTime.getEndTime(), forma);
			// 检查当前时间是否在范围内（包括边界）
			boolean isWithinRange;
			if (endTime.isAfter(startTime)) {
			// 不跨天的情况
			isWithinRange = !now.isBefore(startTime) && !now.isAfter(endTime);
			} else {
			// 跨天的情况
			isWithinRange = !now.isBefore(startTime) \|\| !now.isAfter(endTime);
			}
			for (AuxiliaryOutputWorkingHours auxiliaryOutputWorkingHours : submitPlanDto.getAuxiliaryOutputWorkingHoursList()) {
			InsProduct insProduct = insProductMapper.selectById(auxiliaryOutputWorkingHours.getInsProductId());
			if (isWithinRange) {
			//在时间内就是正常上班
			auxiliaryOutputWorkingHours.setOrderNo(insOrder.getEntrustCode());//非加班委托单号
			auxiliaryOutputWorkingHours.setWorkTime(auxiliaryOutputWorkingHours.getOutputWorkTime());//非加班工时
			auxiliaryOutputWorkingHours.setAmount(1);//非加班数量
			} else {
			//加班
			auxiliaryOutputWorkingHours.setOvertimeOrderNo(insOrder.getEntrustCode());//加班委托单号
			auxiliaryOutputWorkingHours.setOvertimeWorkTime(auxiliaryOutputWorkingHours.getOutputWorkTime());//加班工时
			auxiliaryOutputWorkingHours.setOvertimeAmount(1);//加班数量
			}
			auxiliaryOutputWorkingHours.setManHourGroup(insProduct.getManHourGroup());//工时分组
			DateTimeFormatter formatter = DateTimeFormatter.ofPattern("yyyy-MM-dd");
			DateTimeFormatter formatters = DateTimeFormatter.ofPattern("yyyy-MM-dd HH:mm:ss");
			auxiliaryOutputWorkingHours.setDateTime(LocalDateTime.now().toLocalDate().atStartOfDay().format(formatters));//日期
			LocalDateTime localDateTime = LocalDateTime.now();
			DateTime parse = DateUtil.parse(localDateTime.format(formatter));
			auxiliaryOutputWorkingHours.setWeekDay(getWeek(localDateTime.format(formatters)));//星期
			auxiliaryOutputWorkingHours.setWeek(String.valueOf(DateUtil.weekOfYear(DateUtil.offsetDay(parse, 1))));//周次
			auxiliaryOutputWorkingHours.setCheck(userId);//检测人
			auxiliaryOutputWorkingHoursMapper.insert(auxiliaryOutputWorkingHours);
			}
			}
			return null;
			});
			// 删除数采采集次数
			String key = "frequency" + ":" + entrustCode + ":*";
			RedisUtil.delsLike(key);
			return 1;
			}

			// 获取两个localDateTime的每一天
			public static List<LocalDateTime> getLocalDateTimesBetween(LocalDateTime start, LocalDateTime end) {
			List<LocalDateTime> localDateTimes = new ArrayList<>();
			LocalDate currentDate = start.toLocalDate();
			LocalDateTime currentLocalDateTime = start;
			while (!currentDate.isAfter(end.toLocalDate())) {
			localDateTimes.add(currentLocalDateTime);
			currentLocalDateTime = currentLocalDateTime.plusDays(1);
			currentDate = currentDate.plusDays(1);
			}
			return localDateTimes;
			return 1;
			}

			public static String getWeek(String dayStr) {