tx-lims-after.git

			@@ -108,7 +108,7 @@
			InsSample insSample = insSampleMapper.selectById(insOrderState.getInsSampleId());
			//查询项目
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getState,1)
			.eq(InsProduct::getState, 1)
			.eq(InsProduct::getInsSampleId, insSample.getId())
			.eq(InsProduct::getSonLaboratory, "电路试验"));
			//获取最大端口数量,角度数量,频段数量
			@@ -206,7 +206,15 @@
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("幅度偏差")&& insProductResult2.getFrequency().equals(s)
			.getInspectionItemSubclass().equals("幅度偏差") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			if (inspectionItemSubclass.contains("幅度不平衡度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("幅度不平衡度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			@@ -214,7 +222,15 @@
			if (inspectionItemSubclass.contains("最大相位偏差")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("最大相位偏差")&& insProductResult2.getFrequency().equals(s)
			.getInspectionItemSubclass().equals("最大相位偏差") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			if (inspectionItemSubclass.contains("相位绝对值")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("相位绝对值") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			@@ -231,6 +247,8 @@
			int mm = 0;
			int nn = 0;
			int pp = 0;
			int qq = 0;
			int ss = 0;
			//表格的行数
			for (int i = 0; i <= aa; i++) {
			RowRenderData rowRenderData = new RowRenderData();
			@@ -643,7 +661,7 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("异极化隔离度") && i >(ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)&& i <= (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow) {
			if (inspectionItemSubclass.contains("异极化隔离度") && i > (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) && i <= (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow) {
			gg = (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow;
			if (itemSet.add("异极化隔离度")) {
			index.getAndIncrement();
			@@ -827,7 +845,8 @@
			cells.add(cellRenderData);
			}
			}
			} else {
			}
			else {
			//电调版本(复杂版)
			if (inspectionItemSubclass.contains("电压驻波比") && i <= (angles + 1) * portRow) {
			cc = (angles + 1) * portRow;
			@@ -1379,58 +1398,345 @@
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			//其余列
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("互调") && i > (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) && i <= ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often)) {
			hh = (int) ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often);
			if (itemSet.add("互调")) {
			hh = (int) ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often);
			if (itemSet.add("互调")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("互调")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//互调所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("互调∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 1)).getOften() + "∑6" + i + index);
			} else {
			//最差值
			String[] value = result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 2)).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[((j - 5) + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 1) / (angles + 1) % portRow) * (Math.min(ports, 8)))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最大耦合度") && i > (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) && i <= ((hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) + (angles + 1))) {
			mm = ((hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) + (angles + 1));
			if (itemSet.add("最大耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最大耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最小耦合度") && i > (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) && i <= ((mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) + (angles + 1))) {
			nn = (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) + (angles + 1);
			if (itemSet.add("最小耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最小耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最小耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最小耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("幅度偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) && i <= (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) + k) {
			pp = (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) + k;
			if (itemSet.add("幅度偏差")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("互调")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//互调所在行
			//幅度偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			@@ -1441,7 +1747,7 @@
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("互调∑2" + index);
			textRenderData.setText("幅度偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -1465,11 +1771,11 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			if ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//值
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			@@ -1479,16 +1785,16 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			if ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("不合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("不判定∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			@@ -1498,15 +1804,19 @@
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 1)).getOften() + "∑6" + i + index);
			if ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 2)).getValue().split("\\],\\[");
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[((j - 5) + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 1) / (angles + 1) % portRow) * (Math.min(ports, 8)))]);
			textRenderData.setText(split[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			@@ -1518,16 +1828,22 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最大耦合度") && i > (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) && i <= ((hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) + (angles + 1))) {
			mm = ((hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) + (angles + 1));
			if (itemSet.add("最大耦合度")) {
			}
			if (inspectionItemSubclass.contains("幅度不平衡度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("幅度不平衡度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)
			&& i <= (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) + k) {
			qq = (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) + k;
			if (itemSet.add("幅度不平衡度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最大耦合度所在行
			//幅度偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			@@ -1538,7 +1854,7 @@
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大耦合度∑2" + index);
			textRenderData.setText("幅度偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -1562,11 +1878,11 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//值
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			@@ -1576,16 +1892,16 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh)) % (angles + 1) == 1) {
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			textRenderData.setText("合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			textRenderData.setText("不合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index);
			textRenderData.setText("不判定∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			@@ -1595,14 +1911,22 @@
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//频段
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			try {
			textRenderData.setText(split[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -1611,343 +1935,253 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最小耦合度") && i > (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) && i <= ((mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) + (angles + 1))) {
			nn = (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) + (angles + 1);
			if (itemSet.add("最小耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最小耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最小耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最小耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("幅度偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) && i <= (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) + k) {
			pp = (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) + k;
			if (itemSet.add("幅度偏差")) {
			index.getAndIncrement();
			}
			//幅度偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("幅度偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			}
			if (inspectionItemSubclass.contains("最大相位偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大相位偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) {
			if (itemSet.add("最大相位偏差")) {
			index.getAndIncrement();
			}
			//最大相位偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大相位偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大相位偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			int rr = qq == 0 ? (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) : qq;
			if (i > rr && i <= rr + k) {
			ss = (rr + k) ;
			if (itemSet.add("最大相位偏差")) {
			index.getAndIncrement();
			}
			//最大相位偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大相位偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - rr) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//其余列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - rr) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - rr) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - rr) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - rr) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - rr) % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - rr) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - rr) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("相位绝对值")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("相位绝对值")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			int rr =ss==0?( qq == 0 ? (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) : qq) : ss;
			if (i > ss) {
			if (itemSet.add("相位绝对值")) {
			index.getAndIncrement();
			}
			//最大相位偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大相位偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - ss) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - ss) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - ss) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - ss) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - ss) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - ss) % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - ss) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - ss) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			}
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			}
			}
			TableRenderData tableRenderData = new TableRenderData();
			tableRenderData.setRows(rows);
			int countSize = tableRenderData.getRows().get(0).getCells().size();
			for (RowRenderData row : tableRenderData.getRows()) {
			if (row.getCells().size() != countSize) {
			throw new ErrorException("每行单元格不相等");
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			}
			TableStyle tableStyle = new TableStyle();
			tableStyle.setWidth(XWPFTable.DEFAULT_PERCENTAGE_WIDTH);
			tableStyle.setAlign(TableRowAlign.CENTER);
			BorderStyle borderStyle = new BorderStyle();
			borderStyle.setColor("000000");
			borderStyle.setType(XWPFTable.XWPFBorderType.THICK);
			borderStyle.setSize(4);
			tableStyle.setLeftBorder(borderStyle);
			tableStyle.setTopBorder(borderStyle);
			tableStyle.setRightBorder(borderStyle);
			tableStyle.setBottomBorder(borderStyle);
			tableRenderData.setTableStyle(tableStyle);
			Map<String, Object> table = new HashMap<>();
			table.put("table", tableRenderData);
			tables.add(table);
			lable.getAndIncrement();
			});
			}
			TableRenderData tableRenderData = new TableRenderData();
			tableRenderData.setRows(rows);
			int countSize = tableRenderData.getRows().get(0).getCells().size();
			for (RowRenderData row : tableRenderData.getRows()) {
			if (row.getCells().size() != countSize) {
			throw new ErrorException("每行单元格不相等");
			}
			}
			TableStyle tableStyle = new TableStyle();
			tableStyle.setWidth(XWPFTable.DEFAULT_PERCENTAGE_WIDTH);
			tableStyle.setAlign(TableRowAlign.CENTER);
			BorderStyle borderStyle = new BorderStyle();
			borderStyle.setColor("000000");
			borderStyle.setType(XWPFTable.XWPFBorderType.THICK);
			borderStyle.setSize(4);
			tableStyle.setLeftBorder(borderStyle);
			tableStyle.setTopBorder(borderStyle);
			tableStyle.setRightBorder(borderStyle);
			tableStyle.setBottomBorder(borderStyle);
			tableRenderData.setTableStyle(tableStyle);
			Map<String, Object> table = new HashMap<>();
			table.put("table", tableRenderData);
			tables.add(table);
			lable.getAndIncrement();
			});
			ZipSecureFile.setMinInflateRatio(0.0001);
			InputStream inputStream = this.getClass().getResourceAsStream("/static/word1.docx");

			@@ -1958,7 +2192,7 @@
			put("title", title);
			put("tables", tables);
			}});
			String name = insOrder.getEntrustCode().replace("/", "") + "-" +insSample.getSampleCode()+"-"+ title + ".docx";
			String name = insOrder.getEntrustCode().replace("/", "") + "-" + insSample.getSampleCode() + "-" + title + ".docx";
			String url = UUID.randomUUID() + "_" + name;
			try {
			template.writeAndClose(Files.newOutputStream(Paths.get(wordUrl + "/" + url)));
			@@ -2063,7 +2297,7 @@
			InsSample insSample = insSampleMapper.selectById(insOrderState.getInsSampleId());
			//查询项目
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getState,1)
			.eq(InsProduct::getState, 1)
			.eq(InsProduct::getInsSampleId, insSample.getId())
			.eq(InsProduct::getSonLaboratory, "电路试验"));
			//计算行数
			@@ -2072,23 +2306,22 @@
			for (InsProductResult2VO insProductResult2VO : insProductResult2VOS) {
			String[] split = insProductResult2VO.getPort().split(",");
			String value = insProductResult2VO.getValue().replace("[[", "").replace("]]", "");
			if (split.length>1){
			if (split.length > 1) {
			for (int i = 0; i < split.length; i++) {
			InsProductResult2VO insProductResult2VO1 = new InsProductResult2VO();
			BeanUtils.copyProperties(insProductResult2VO,insProductResult2VO1);
			BeanUtils.copyProperties(insProductResult2VO, insProductResult2VO1);
			//端口
			insProductResult2VO1.setPort(split[i]);
			//值
			try{
			insProductResult2VO1.setValue(value.split(",")[i].replace("\"",""));
			}catch (Exception e){
			try {
			insProductResult2VO1.setValue(value.split(",")[i].replace("\"", ""));
			} catch (Exception e) {
			insProductResult2VO1.setValue("");
			}
			result2VOS.add(insProductResult2VO1);
			}
			}
			else {
			insProductResult2VO.setValue(value.replace("\"",""));
			} else {
			insProductResult2VO.setValue(value.replace("\"", ""));
			result2VOS.add(insProductResult2VO);
			}
			}
			@@ -2096,138 +2329,131 @@
			Set<String> itemSet = new HashSet<>();
			//表格的行数
			for (int i = 0; i < result2VOS.size(); i++) {
			RowRenderData rowRenderData = new RowRenderData();
			RowStyle rowStyle = new RowStyle();
			rowStyle.setHeight(40);
			rowRenderData.setRowStyle(rowStyle);
			List<CellRenderData> cells = new ArrayList<>();
			//表格的列数
			for (int j = 0; j < 8; j++) {
			CellRenderData cellRenderData = new CellRenderData();
			CellStyle cellStyle = new CellStyle();
			cellStyle.setVertAlign(XWPFTableCell.XWPFVertAlign.CENTER);
			cellRenderData.setCellStyle(cellStyle);
			List<ParagraphRenderData> paragraphRenderDataList = new ArrayList<>();
			ParagraphRenderData paragraphRenderData = new ParagraphRenderData();
			ParagraphStyle paragraphStyle = new ParagraphStyle();
			paragraphStyle.setAlign(ParagraphAlignment.CENTER);
			paragraphRenderData.setParagraphStyle(paragraphStyle);
			List<RenderData> renderData = new ArrayList<>();
			TextRenderData textRenderData = new TextRenderData();
			Style style = new Style();
			style.setFontFamily("宋体");
			style.setColor("000000");
			textRenderData.setStyle(style);
			if (j==0){
			//第一列(序号)
			if (itemSet.add(result2VOS.get(i).getInspectionItemSubclass())) {
			index.getAndIncrement();
			RowRenderData rowRenderData = new RowRenderData();
			RowStyle rowStyle = new RowStyle();
			rowStyle.setHeight(40);
			rowRenderData.setRowStyle(rowStyle);
			List<CellRenderData> cells = new ArrayList<>();
			//表格的列数
			for (int j = 0; j < 8; j++) {
			CellRenderData cellRenderData = new CellRenderData();
			CellStyle cellStyle = new CellStyle();
			cellStyle.setVertAlign(XWPFTableCell.XWPFVertAlign.CENTER);
			cellRenderData.setCellStyle(cellStyle);
			List<ParagraphRenderData> paragraphRenderDataList = new ArrayList<>();
			ParagraphRenderData paragraphRenderData = new ParagraphRenderData();
			ParagraphStyle paragraphStyle = new ParagraphStyle();
			paragraphStyle.setAlign(ParagraphAlignment.CENTER);
			paragraphRenderData.setParagraphStyle(paragraphStyle);
			List<RenderData> renderData = new ArrayList<>();
			TextRenderData textRenderData = new TextRenderData();
			Style style = new Style();
			style.setFontFamily("宋体");
			style.setColor("000000");
			textRenderData.setStyle(style);
			if (j == 0) {
			//第一列(序号)
			if (itemSet.add(result2VOS.get(i).getInspectionItemSubclass())) {
			index.getAndIncrement();
			}
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列(检验项目)
			textRenderData.setText(result2VOS.get(i).getInspectionItemSubclass() + "∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列(单位)
			textRenderData.setText(result2VOS.get(i).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列(标准与要求)
			textRenderData.setText(result2VOS.get(i).getAsk());
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列(端口)
			try {
			textRenderData.setText(result2VOS.get(i).getPort());
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 5) {
			//第六列(频段)
			try {
			textRenderData.setText(result2VOS.get(i).getFrequency());
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 6) {
			//第七列(检验值)
			try {
			textRenderData.setText(result2VOS.get(i).getValue());
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//最后一列(结论)
			try {
			if (result2VOS.get(i).getResult().equals("1")) {
			textRenderData.setText("合格");
			} else if (result2VOS.get(i).getResult().equals("0")) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			else if (j==1){
			//第二列(检验项目)
			textRenderData.setText(result2VOS.get(i).getInspectionItemSubclass()+ "∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==2){
			//第三列(单位)
			textRenderData.setText(result2VOS.get(i).getUnit()+ "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==3){
			//第四列(标准与要求)
			textRenderData.setText(result2VOS.get(i).getAsk());
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==4){
			//第五列(端口)
			try{
			textRenderData.setText(result2VOS.get(i).getPort());
			}catch (Exception e){
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==5){
			//第六列(频段)
			try{
			textRenderData.setText(result2VOS.get(i).getFrequency());
			}catch (Exception e){
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==6){
			//第七列(检验值)
			try{
			textRenderData.setText(result2VOS.get(i).getValue());
			}catch (Exception e){
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else {
			//最后一列(结论)
			try{
			if (result2VOS.get(i).getResult().equals("1")) {
			textRenderData.setText("合格");
			}else if (result2VOS.get(i).getResult().equals("0")){
			textRenderData.setText("不合格");
			}else {
			textRenderData.setText("不判定");
			}
			}catch (Exception e){
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			}
			}
			TableRenderData tableRenderData = new TableRenderData();
			tableRenderData.setRows(rows);
			int countSize = tableRenderData.getRows().get(0).getCells().size();
			for (RowRenderData row : tableRenderData.getRows()) {
			if (row.getCells().size() != countSize) {
			throw new ErrorException("每行单元格不相等");
			}
			if (row.getCells().size() != countSize) {
			throw new ErrorException("每行单元格不相等");
			}
			}
			TableStyle tableStyle = new TableStyle();
			tableStyle.setWidth(XWPFTable.DEFAULT_PERCENTAGE_WIDTH);
			@@ -2255,7 +2481,7 @@
			put("title", title);
			put("tables", tables);
			}});
			String name = insOrder.getEntrustCode().replace("/", "") + "-" +insSample.getSampleCode()+"-"+ title + ".docx";
			String name = insOrder.getEntrustCode().replace("/", "") + "-" + insSample.getSampleCode() + "-" + title + ".docx";
			String url = UUID.randomUUID() + "_" + name;
			try {
			template.writeAndClose(Files.newOutputStream(Paths.get(wordUrl + "/" + url)));
			@@ -2370,78 +2596,78 @@
			AtomicReference<Integer> productSize2 = new AtomicReference<>(0);
			AtomicReference<Integer> productSize3 = new AtomicReference<>(0);
			String[] monthNames = {"January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"};
			SampleProductDto s=insSample;
			models.add(s.getModel());
			standardMethod.addAll(standardMethodListMapper.selectList(Wrappers.<StandardMethodList>lambdaQuery()
			.in(StandardMethodList::getId, Arrays.stream(s.getStandardMethodListId().replaceAll("[\\[\\]]", "").split(","))
			.map(String::trim).map(Integer::parseInt).collect(Collectors.toList()))).stream().map(aa -> {
			return aa.getCode() + " " + aa.getName();
			}).distinct().collect(Collectors.toList()));
			//总数
			Long productCount = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId()));
			productSize.set(productSize.get() + Integer.parseInt(productCount + ""));
			//不判定
			Long productCount1 = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId())
			.eq(InsProduct::getInsResult, 3));
			productSize1.set(productSize1.get() + Integer.parseInt(productCount1 + ""));
			//不合格
			Long productCount2 = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId())
			.eq(InsProduct::getInsResult, 0));
			productSize2.set(productSize2.get() + Integer.parseInt(productCount2 + ""));
			//合格
			Long productCount3 = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId())
			.eq(InsProduct::getInsResult, 1));
			productSize3.set(productSize3.get() + Integer.parseInt(productCount3 + ""));
			//将项目按照站点进行分类
			Map<String, List<InsProduct>> listMap = s.getInsProduct().stream().collect(Collectors.groupingBy(InsProduct::getSonLaboratory));
			// 创建一个 Map 将站点和项目ID的映射关系
			Map<String, Set<Integer>> labToDeviceMap = new HashMap<>();
			// 获取所有站点的项目ID 列表
			for (Map.Entry<String, List<InsProduct>> entry : listMap.entrySet()) {
			Set<Integer> productIds = entry.getValue().stream()
			.map(InsProduct::getId)
			.collect(Collectors.toSet());
			labToDeviceMap.put(entry.getKey(), productIds);
			SampleProductDto s = insSample;
			models.add(s.getModel());
			standardMethod.addAll(standardMethodListMapper.selectList(Wrappers.<StandardMethodList>lambdaQuery()
			.in(StandardMethodList::getId, Arrays.stream(s.getStandardMethodListId().replaceAll("[\\[\\]]", "").split(","))
			.map(String::trim).map(Integer::parseInt).collect(Collectors.toList()))).stream().map(aa -> {
			return aa.getCode() + " " + aa.getName();
			}).distinct().collect(Collectors.toList()));
			//总数
			Long productCount = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId()));
			productSize.set(productSize.get() + Integer.parseInt(productCount + ""));
			//不判定
			Long productCount1 = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId())
			.eq(InsProduct::getInsResult, 3));
			productSize1.set(productSize1.get() + Integer.parseInt(productCount1 + ""));
			//不合格
			Long productCount2 = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId())
			.eq(InsProduct::getInsResult, 0));
			productSize2.set(productSize2.get() + Integer.parseInt(productCount2 + ""));
			//合格
			Long productCount3 = insProductMapper.selectCount(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getInsSampleId, s.getId())
			.eq(InsProduct::getInsResult, 1));
			productSize3.set(productSize3.get() + Integer.parseInt(productCount3 + ""));
			//将项目按照站点进行分类
			Map<String, List<InsProduct>> listMap = s.getInsProduct().stream().collect(Collectors.groupingBy(InsProduct::getSonLaboratory));
			// 创建一个 Map 将站点和项目ID的映射关系
			Map<String, Set<Integer>> labToDeviceMap = new HashMap<>();
			// 获取所有站点的项目ID 列表
			for (Map.Entry<String, List<InsProduct>> entry : listMap.entrySet()) {
			Set<Integer> productIds = entry.getValue().stream()
			.map(InsProduct::getId)
			.collect(Collectors.toSet());
			labToDeviceMap.put(entry.getKey(), productIds);
			}
			for (InsReportDto2 insReportDto2 : insReportDto1.getInsReportDto2s()) {
			String laboratory = insReportDto2.getLaboratory();
			if (!labToDeviceMap.containsKey(laboratory)) {
			continue;
			}
			for (InsReportDto2 insReportDto2 : insReportDto1.getInsReportDto2s()) {
			String laboratory = insReportDto2.getLaboratory();
			if (!labToDeviceMap.containsKey(laboratory)) {
			continue;
			}
			Set<Integer> productIds = labToDeviceMap.get(laboratory);
			Integer num = insReportDto2.getNum();
			//普通试验结果表
			List<InsProductResult> insProductResults = insProductResultMapper.selectList(
			Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getNum, num)
			.in(InsProductResult::getInsProductId, productIds));
			for (InsProductResult insProductResult : insProductResults) {
			List<JSONObject> jsonObjects = JSON.parseArray(insProductResult.getEquipValue(), JSONObject.class);
			if (ObjectUtils.isNotEmpty(jsonObjects)) {
			for (JSONObject jsonObject : jsonObjects) {
			String value = jsonObject.getString("v");
			if (value != null && !value.isEmpty()) {
			deviceSet.add(value);
			}
			Set<Integer> productIds = labToDeviceMap.get(laboratory);
			Integer num = insReportDto2.getNum();
			//普通试验结果表
			List<InsProductResult> insProductResults = insProductResultMapper.selectList(
			Wrappers.<InsProductResult>lambdaQuery()
			.eq(InsProductResult::getNum, num)
			.in(InsProductResult::getInsProductId, productIds));
			for (InsProductResult insProductResult : insProductResults) {
			List<JSONObject> jsonObjects = JSON.parseArray(insProductResult.getEquipValue(), JSONObject.class);
			if (ObjectUtils.isNotEmpty(jsonObjects)) {
			for (JSONObject jsonObject : jsonObjects) {
			String value = jsonObject.getString("v");
			if (value != null && !value.isEmpty()) {
			deviceSet.add(value);
			}
			}
			}
			//电路试验结果表
			List<InsProductResult2> insProductResult2s = insProductResult2Mapper.selectList(
			Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getNum, num)
			.in(InsProductResult2::getInsProductId, productIds));
			for (InsProductResult2 result2 : insProductResult2s) {
			String equipValue = result2.getEquipValue();
			if (equipValue != null && !equipValue.isEmpty()) {
			deviceSet.add(equipValue);
			}
			}
			//电路试验结果表
			List<InsProductResult2> insProductResult2s = insProductResult2Mapper.selectList(
			Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getNum, num)
			.in(InsProductResult2::getInsProductId, productIds));
			for (InsProductResult2 result2 : insProductResult2s) {
			String equipValue = result2.getEquipValue();
			if (equipValue != null && !equipValue.isEmpty()) {
			deviceSet.add(equipValue);
			}
			}
			}


			/检验情况一览表/
			@@ -2601,7 +2827,7 @@
			indexs += 1;

			/创建环境试验条件表2(项目数+1)*/
			List<InsProduct> products = insSample.getInsProduct().stream()
			List<InsProduct> products = insSample.getInsProduct().stream()
			.filter(insProduct -> !insProduct.getInspectionItem().equals("电路试验"))
			.filter(insProduct -> !insProduct.getInspectionItem().equals("辐射试验"))
			.map(insProduct -> {
			@@ -2720,15 +2946,14 @@
			InsOrderState orderState = insOrderStateMapper.selectById(insOrderUser.getInsOrderStateId());
			if (orderState.getLaboratory().equals("电路试验")) {
			orderState.setNum(insOrderUser.getNum());
			if(!insOrder.getSampleType().equals("无源器件")){
			if (!insOrder.getSampleType().equals("无源器件")) {
			getWord1(insOrderUser.getTerm(), orderState, tables2);
			}else {
			} else {
			getWord2(insOrderUser.getTerm(), orderState, tables2);
			}
			}
			}
			}
			else {
			} else {
			//如果只有环境试验没有电路试验
			strings.remove("近场");
			strings.remove("远场");
			@@ -2881,7 +3106,7 @@
			List<Map<String, String>> sampleList = insSampleMapper.selectSampleList(orderId);
			Integer userId = insSampleUserMapper.selectOne(Wrappers.<InsSampleUser>lambdaQuery()
			.eq(InsSampleUser::getInsSampleId, insReportDto1.getSampleId())
			.eq(InsSampleUser::getState,0)
			.eq(InsSampleUser::getState, 0)
			.last("limit 1")).getUserId();
			String signatureUrl;
			try {
			@@ -3087,284 +3312,867 @@


			//电路报告用于总报告的方法(天线)
			private void getWord1(String term, InsOrderState insOrderState,List<Map<String, Object>> tables2) {
			private void getWord1(String term, InsOrderState insOrderState, List<Map<String, Object>> tables2) {
			AtomicInteger lable = new AtomicInteger(1);
			AtomicInteger index = new AtomicInteger();
			String title = term + "电路参数";
			InsSample insSample = insSampleMapper.selectById(insOrderState.getInsSampleId());
			//查询项目
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getState,1)
			.eq(InsProduct::getInsSampleId, insSample.getId())
			.eq(InsProduct::getSonLaboratory, "电路试验"));
			.eq(InsProduct::getState, 1)
			.eq(InsProduct::getInsSampleId, insSample.getId())
			.eq(InsProduct::getSonLaboratory, "电路试验"));
			//获取最大端口数量,角度数量,频段数量
			List<InsProductResult2> insProductResult2s = insProductResult2Mapper.selectList(Wrappers.<InsProductResult2>lambdaQuery()
			.eq(InsProductResult2::getNum, insOrderState.getNum())
			.in(InsProductResult2::getInsProductId, insProducts.stream().map(InsProduct::getId).collect(Collectors.toList())));
			.eq(InsProductResult2::getNum, insOrderState.getNum())
			.in(InsProductResult2::getInsProductId, insProducts.stream().map(InsProduct::getId).collect(Collectors.toList())));
			//按照频段分表(查询所有频段)
			List<String> frequencys = insProductResult2s.stream().map(InsProductResult2::getFrequency).distinct().collect(Collectors.toList());
			frequencys.forEach(s -> {
			int ports = 0;//端口数
			int angles = 0;//角度数
			List<InsProductResult2> productResult2s = insProductResult2s.stream().filter(insProductResult2 -> insProductResult2.getFrequency().equals(s)).collect(Collectors.toList());
			for (InsProductResult2 insProductResult2 : productResult2s) {
			if (insProductMapper.selectById(insProductResult2.getInsProductId()).getInspectionItemSubclass().equals("电压驻波比") && insProductResult2.getPort().split(",").length > ports) {
			ports = insProductResult2.getPort().split(",").length;
			}
			if (insProductResult2.getAngle().split(",").length > angles) {
			angles = insProductResult2.getAngle().split(",").length;
			}
			int ports = 0;//端口数
			int angles = 0;//角度数
			List<InsProductResult2> productResult2s = insProductResult2s.stream().filter(insProductResult2 -> insProductResult2.getFrequency().equals(s)).collect(Collectors.toList());
			for (InsProductResult2 insProductResult2 : productResult2s) {
			if (insProductMapper.selectById(insProductResult2.getInsProductId()).getInspectionItemSubclass().equals("电压驻波比") && insProductResult2.getPort().split(",").length > ports) {
			ports = insProductResult2.getPort().split(",").length;
			}
			//频点数
			long often = productResult2s.stream().filter(insProductResult2 -> insProductResult2.getFrequency().equals(s))
			.filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId()).getInspectionItemSubclass().equals("互调")
			).filter(insProductResult2 -> ObjectUtils.isNotEmpty(insProductResult2.getOften())).distinct().count();
			List<String> inspectionItemSubclass = insProducts.stream().map(InsProduct::getInspectionItemSubclass).collect(Collectors.toList());
			//行数
			int aa = 0;
			int portRow = ports % 8 == 0 ? ports / 8 : ports / 8 + 1;
			//先判断是1简单版还是0复杂版
			if (insOrderState.getVersion() == 1) {
			if (inspectionItemSubclass.contains("电压驻波比")) {
			aa += 2 * portRow;
			}
			if (inspectionItemSubclass.contains("同极化隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("同列隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("端口间隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("异极化隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("互调")) {
			aa += (angles + 1) * portRow * often;
			}
			if (insProductResult2.getAngle().split(",").length > angles) {
			angles = insProductResult2.getAngle().split(",").length;
			}
			else {
			if (inspectionItemSubclass.contains("电压驻波比")) {
			aa += (angles + 1) * portRow;
			}
			if (inspectionItemSubclass.contains("同极化隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("同极化隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("同列隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("同列隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("端口间隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("端口间隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("异极化隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("异极化隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("互调")) {
			aa += (angles + 1) * portRow * often;
			}
			if (inspectionItemSubclass.contains("最大耦合度")) {
			aa += (angles + 1);
			}
			if (inspectionItemSubclass.contains("最小耦合度")) {
			aa += (angles + 1);
			}
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("幅度偏差")&& insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			if (inspectionItemSubclass.contains("最大相位偏差")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("最大相位偏差")&& insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			}
			//频点数
			long often = productResult2s.stream().filter(insProductResult2 -> insProductResult2.getFrequency().equals(s))
			.filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId()).getInspectionItemSubclass().equals("互调")
			).filter(insProductResult2 -> ObjectUtils.isNotEmpty(insProductResult2.getOften())).distinct().count();
			List<String> inspectionItemSubclass = insProducts.stream().map(InsProduct::getInspectionItemSubclass).collect(Collectors.toList());
			//行数
			int aa = 0;
			int portRow = ports % 8 == 0 ? ports / 8 : ports / 8 + 1;
			//先判断是1简单版还是0复杂版
			if (insOrderState.getVersion() == 1) {
			if (inspectionItemSubclass.contains("电压驻波比")) {
			aa += 2 * portRow;
			}
			List<RowRenderData> rows = new ArrayList<>();
			Set<String> itemSet = new HashSet<>();
			int cc = 0;
			int dd = 0;
			int ee = 0;
			int ff = 0;
			int gg = 0;
			int hh = 0;
			int mm = 0;
			int nn = 0;
			int pp = 0;
			//表格的行数
			for (int i = 0; i <= aa; i++) {
			RowRenderData rowRenderData = new RowRenderData();
			RowStyle rowStyle = new RowStyle();
			rowStyle.setHeight(40);
			rowRenderData.setRowStyle(rowStyle);
			List<CellRenderData> cells = new ArrayList<>();
			//表格的列数
			int bb = ports > 8 ? 14 : ports + 6;
			for (int j = 0; j < bb; j++) {
			CellRenderData cellRenderData = new CellRenderData();
			CellStyle cellStyle = new CellStyle();
			cellStyle.setVertAlign(XWPFTableCell.XWPFVertAlign.CENTER);
			cellRenderData.setCellStyle(cellStyle);
			List<ParagraphRenderData> paragraphRenderDataList = new ArrayList<>();
			ParagraphRenderData paragraphRenderData = new ParagraphRenderData();
			ParagraphStyle paragraphStyle = new ParagraphStyle();
			paragraphStyle.setAlign(ParagraphAlignment.CENTER);
			paragraphRenderData.setParagraphStyle(paragraphStyle);
			List<RenderData> renderData = new ArrayList<>();
			TextRenderData textRenderData = new TextRenderData();
			Style style = new Style();
			style.setFontFamily("宋体");
			style.setColor("000000");
			textRenderData.setStyle(style);
			if (i == 0) {
			//第一行
			textRenderData.setText("频段：" + s + "∑0" + lable);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			if (insOrderState.getVersion() == 1) {
			//非电调版本(简单版)
			if (inspectionItemSubclass.contains("电压驻波比") && i <= 2 * portRow) {
			cc = 2 * portRow;
			if (itemSet.add("电压驻波比")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("电压驻波比")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//电压驻波比所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("电压驻波比∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if (i % 2 == 0) {
			//最差值
			textRenderData.setText("最差值");
			} else {
			//端口
			textRenderData.setText("端口");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (i % 2 == 0) {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			} else {
			textRenderData.setText("/");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if (i % 2 == 0) {
			//最差值
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) + (i - 1) / 2 * (Math.min(ports, 8))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + (i / 2) * (Math.min(ports, 8))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			if (inspectionItemSubclass.contains("同极化隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("同列隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("端口间隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("异极化隔离度")) {
			aa += 1 * portRow;
			}
			if (inspectionItemSubclass.contains("互调")) {
			aa += (angles + 1) * portRow * often;
			}
			} else {
			if (inspectionItemSubclass.contains("电压驻波比")) {
			aa += (angles + 1) * portRow;
			}
			if (inspectionItemSubclass.contains("同极化隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("同极化隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("同列隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("同列隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("端口间隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("端口间隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("异极化隔离度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("异极化隔离度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			}
			if (inspectionItemSubclass.contains("互调")) {
			aa += (angles + 1) * portRow * often;
			}
			if (inspectionItemSubclass.contains("最大耦合度")) {
			aa += (angles + 1);
			}
			if (inspectionItemSubclass.contains("最小耦合度")) {
			aa += (angles + 1);
			}
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("幅度偏差") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			if (inspectionItemSubclass.contains("幅度不平衡度")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("幅度不平衡度") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			if (inspectionItemSubclass.contains("最大相位偏差")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("最大相位偏差") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			if (inspectionItemSubclass.contains("相位绝对值")) {
			List<InsProductResult2> result2s = productResult2s.stream().filter(insProductResult2 ->
			insProductMapper.selectById(insProductResult2.getInsProductId())
			.getInspectionItemSubclass().equals("相位绝对值") && insProductResult2.getFrequency().equals(s)
			).collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			aa += (angles + 1) * (length % 8 == 0 ? length / 8 : length / 8 + 1);
			}
			}
			List<RowRenderData> rows = new ArrayList<>();
			Set<String> itemSet = new HashSet<>();
			int cc = 0;
			int dd = 0;
			int ee = 0;
			int ff = 0;
			int gg = 0;
			int hh = 0;
			int mm = 0;
			int nn = 0;
			int pp = 0;
			int qq = 0;
			int ss = 0;
			//表格的行数
			for (int i = 0; i <= aa; i++) {
			RowRenderData rowRenderData = new RowRenderData();
			RowStyle rowStyle = new RowStyle();
			rowStyle.setHeight(40);
			rowRenderData.setRowStyle(rowStyle);
			List<CellRenderData> cells = new ArrayList<>();
			//表格的列数
			int bb = ports > 8 ? 14 : ports + 6;
			for (int j = 0; j < bb; j++) {
			CellRenderData cellRenderData = new CellRenderData();
			CellStyle cellStyle = new CellStyle();
			cellStyle.setVertAlign(XWPFTableCell.XWPFVertAlign.CENTER);
			cellRenderData.setCellStyle(cellStyle);
			List<ParagraphRenderData> paragraphRenderDataList = new ArrayList<>();
			ParagraphRenderData paragraphRenderData = new ParagraphRenderData();
			ParagraphStyle paragraphStyle = new ParagraphStyle();
			paragraphStyle.setAlign(ParagraphAlignment.CENTER);
			paragraphRenderData.setParagraphStyle(paragraphStyle);
			List<RenderData> renderData = new ArrayList<>();
			TextRenderData textRenderData = new TextRenderData();
			Style style = new Style();
			style.setFontFamily("宋体");
			style.setColor("000000");
			textRenderData.setStyle(style);
			if (i == 0) {
			//第一行
			textRenderData.setText("频段：" + s + "∑0" + lable);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			if (insOrderState.getVersion() == 1) {
			//非电调版本(简单版)
			if (inspectionItemSubclass.contains("电压驻波比") && i <= 2 * portRow) {
			cc = 2 * portRow;
			if (itemSet.add("电压驻波比")) {
			index.getAndIncrement();
			}
			if (inspectionItemSubclass.contains("同极化隔离度") && i > cc && i <= cc + portRow) {
			dd = cc + portRow;
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("电压驻波比")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//电压驻波比所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("电压驻波比∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if (i % 2 == 0) {
			//最差值
			textRenderData.setText("最差值");
			} else {
			//端口
			textRenderData.setText("端口");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (i % 2 == 0) {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			} else {
			textRenderData.setText("/");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if (i % 2 == 0) {
			//最差值
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) + (i - 1) / 2 * (Math.min(ports, 8))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + (i / 2) * (Math.min(ports, 8))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("同极化隔离度") && i > cc && i <= cc + portRow) {
			dd = cc + portRow;
			if (itemSet.add("同极化隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同极化隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//同极化隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("同极化隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - cc - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - cc - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("同列隔离度") && i > (dd == 0 ? cc : dd) && i <= (dd == 0 ? cc : dd) + portRow) {
			ee = (dd == 0 ? cc : dd) + portRow;
			if (itemSet.add("同列隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同列隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - (dd == 0 ? cc : dd) - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - (dd == 0 ? cc : dd) - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("端口间隔离度") && i > (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) && i <= (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + portRow) {
			ff = (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + portRow;
			if (itemSet.add("端口间隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("端口间隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//同极化隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("同极化隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("异极化隔离度") && i > (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) && i <= (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow) {
			gg = (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow;
			if (itemSet.add("异极化隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("异极化隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//异极化隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("异极化隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("互调") && i > (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) {
			if (itemSet.add("互调")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("互调"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//互调所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("互调∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText("角度");
			} else {
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 2) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText(result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 1)).getOften() + "∑6" + i + index);
			} else {
			String[] value = result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 2)).getValue().split("\\],\\[");
			String[] split = value[(i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 2) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[((j - 5) + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 1) / (angles + 1) % portRow) * (Math.min(ports, 8)))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			else {
			//电调版本(复杂版)
			if (inspectionItemSubclass.contains("电压驻波比") && i <= (angles + 1) * portRow) {
			cc = (angles + 1) * portRow;
			if (itemSet.add("电压驻波比")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("电压驻波比")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//电压驻波比所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("电压驻波比∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if (i % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (i % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i + (angles - 1)) / (angles + 1) - 1));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i + (angles - 1)) / (angles + 1) - 1));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i + (angles - 1)) / (angles + 1) - 1));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if (i % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + (i / (angles + 1)) * (Math.min(ports, 8))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i + (angles - 1)) / (angles + 1) - 1) * (Math.min(ports, 8))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("同极化隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同极化隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > cc && i <= cc + k) {
			dd = cc + k;
			if (itemSet.add("同极化隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同极化隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//同极化隔离度所在行
			if (j == 0) {
			//第一列
			@@ -3400,7 +4208,13 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			if ((i - cc) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -3408,24 +4222,17 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			if ((i - cc) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - cc - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - cc) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - cc) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - cc) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -3433,11 +4240,40 @@
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - cc - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			//其余列
			if ((i - cc) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - cc) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - cc) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}

			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - cc) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - cc) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -3446,17 +4282,20 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("同列隔离度") && i > (dd == 0 ? cc : dd) && i <= (dd == 0 ? cc : dd) + portRow) {
			ee = (dd == 0 ? cc : dd) + portRow;
			}
			if (inspectionItemSubclass.contains("同列隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同列隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > (dd == 0 ? cc : dd) && i <= (dd == 0 ? cc : dd) + k) {
			ee = (dd == 0 ? cc : dd) + k;
			if (itemSet.add("同列隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同列隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//隔离度所在行
			if (j == 0) {
			//第一列
			@@ -3492,7 +4331,13 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			if ((i - (dd == 0 ? cc : dd)) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -3500,24 +4345,17 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			if ((i - (dd == 0 ? cc : dd)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - (dd == 0 ? cc : dd) - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (dd == 0 ? cc : dd)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (dd == 0 ? cc : dd)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (dd == 0 ? cc : dd)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -3525,11 +4363,40 @@
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - (dd == 0 ? cc : dd) - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			//其余列
			if ((i - (dd == 0 ? cc : dd)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}

			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -3538,17 +4405,20 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("端口间隔离度") && i > (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) && i <= (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + portRow) {
			ff = (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + portRow;
			}
			if (inspectionItemSubclass.contains("端口间隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("端口间隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) && i <= (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + k) {
			ff = (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + k;
			if (itemSet.add("端口间隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("端口间隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//同极化隔离度所在行
			if (j == 0) {
			//第一列
			@@ -3560,7 +4430,7 @@
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("同极化隔离度∑2" + index);
			textRenderData.setText("端口间隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -3584,7 +4454,13 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			if ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -3592,24 +4468,17 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			if ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -3617,11 +4486,40 @@
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			//其余列
			if ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}

			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			@@ -3630,17 +4528,20 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("异极化隔离度") && i >(ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)&& i <= (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow) {
			gg = (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + portRow;
			}
			if (inspectionItemSubclass.contains("异极化隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("异极化隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) && i <= (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + k) {
			gg = (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + k;
			if (itemSet.add("异极化隔离度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("异极化隔离度"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//异极化隔离度所在行
			if (j == 0) {
			//第一列
			@@ -3676,191 +4577,7 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			textRenderData.setText("最差值");
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格");
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格");
			} else {
			textRenderData.setText("不判定");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j % 2 == 0) {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 6) / 2 + (i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) - 1) * 4] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			String value = result2s.get(0).getValue().replaceAll("[\\[\\]\"]", "");
			try {
			textRenderData.setText(value.split(",")[(j - 5) / 2 + (i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) - 1) * 4] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("互调") && i > (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) {
			if (itemSet.add("互调")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream()
			.filter(insProduct -> insProduct.getInspectionItemSubclass().equals("互调"))
			.collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//互调所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("互调∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText("角度");
			} else {
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 2) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText(result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 1)).getOften() + "∑6" + i + index);
			} else {
			String[] value = result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 2)).getValue().split("\\],\\[");
			String[] split = value[(i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 2) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[((j - 5) + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 1) / (angles + 1) % portRow) * (Math.min(ports, 8)))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			} else {
			//电调版本(复杂版)
			if (inspectionItemSubclass.contains("电压驻波比") && i <= (angles + 1) * portRow) {
			cc = (angles + 1) * portRow;
			if (itemSet.add("电压驻波比")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("电压驻波比")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//电压驻波比所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("电压驻波比∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if (i % (angles + 1) == 1) {
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			@@ -3874,16 +4591,16 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if (i % (angles + 1) == 1) {
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("合格∑8" + index + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("不合格∑8" + index + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("不判定∑8" + index + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			@@ -3893,10 +4610,629 @@
			cells.add(cellRenderData);
			} else {
			//其余列
			if (i % (angles + 1) == 1) {
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("互调") && i > (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) && i <= ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often)) {
			hh = (int) ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often);
			if (itemSet.add("互调")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("互调")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//互调所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("互调∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 1)).getOften() + "∑6" + i + index);
			} else {
			//最差值
			String[] value = result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 2)).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[((j - 5) + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 1) / (angles + 1) % portRow) * (Math.min(ports, 8)))]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最大耦合度") && i > (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) && i <= ((hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) + (angles + 1))) {
			mm = ((hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) + (angles + 1));
			if (itemSet.add("最大耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最大耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最小耦合度") && i > (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) && i <= ((mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) + (angles + 1))) {
			nn = (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) + (angles + 1);
			if (itemSet.add("最小耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最小耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最小耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最小耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("幅度偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) && i <= (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) + k) {
			pp = (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) + k;
			if (itemSet.add("幅度偏差")) {
			index.getAndIncrement();
			}
			//幅度偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("幅度偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("幅度不平衡度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("幅度不平衡度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)
			&& i <= (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) + k) {
			qq = (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) + k;
			if (itemSet.add("幅度不平衡度")) {
			index.getAndIncrement();
			}
			//幅度偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("幅度偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//频段
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("最大相位偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大相位偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			int rr = qq == 0 ? (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) : qq;
			if (i > rr && i <= rr + k) {
			ss = (rr + k) ;
			if (itemSet.add("最大相位偏差")) {
			index.getAndIncrement();
			}
			//最大相位偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大相位偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - rr) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - rr) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - rr) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - rr) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - rr) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - rr) % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + (i / (angles + 1)) * (Math.min(ports, 8))]);
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - rr) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			@@ -3905,7 +5241,7 @@
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i + (angles - 1)) / (angles + 1) - 1) * (Math.min(ports, 8))]);
			textRenderData.setText(split[(j - 5) + ((i - rr) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			@@ -3917,507 +5253,21 @@
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("同极化隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同极化隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > cc && i <= cc + k) {
			dd = cc + k;
			if (itemSet.add("同极化隔离度")) {
			index.getAndIncrement();
			}
			//同极化隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("同极化隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - cc) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - cc) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - cc) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - cc) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - cc) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - cc) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - cc) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - cc) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}

			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - cc) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - cc) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("同列隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("同列隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > (dd == 0 ? cc : dd) && i <= (dd == 0 ? cc : dd) + k) {
			ee = (dd == 0 ? cc : dd) + k;
			if (itemSet.add("同列隔离度")) {
			index.getAndIncrement();
			}
			//隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (dd == 0 ? cc : dd)) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (dd == 0 ? cc : dd)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (dd == 0 ? cc : dd)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (dd == 0 ? cc : dd)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (dd == 0 ? cc : dd)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (dd == 0 ? cc : dd)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}

			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (dd == 0 ? cc : dd)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("端口间隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("端口间隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) && i <= (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + k) {
			ff = (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) + k;
			if (itemSet.add("端口间隔离度")) {
			index.getAndIncrement();
			}
			//同极化隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("端口间隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}

			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (ee == 0 ? ((dd == 0 ? cc : dd)) : ee)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("异极化隔离度")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("异极化隔离度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % (ports > 8 ? 4 : (ports + 1) / 2) == 0 ? length / (ports > 8 ? 4 : (ports + 1) / 2) : length / (ports > 8 ? 4 : (ports + 1) / 2) + 1);
			int k = (angles + 1) * portRow2;
			if (i > (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) && i <= (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + k) {
			gg = (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) + k;
			if (itemSet.add("异极化隔离度")) {
			index.getAndIncrement();
			}
			//异极化隔离度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("异极化隔离度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			//端口
			textRenderData.setText("端口");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) % (angles + 1) == 1) {
			//端口
			if (j % 2 == 0) {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 1)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			if (j % 2 == 0) {
			try {
			textRenderData.setText(split[(j - 6) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 6));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			try {
			textRenderData.setText(split[(j - 5) / 2 + ((i - (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff)) / (angles + 2)) * (ports > 8 ? 4 : (ports + 1) / 2)] + "∑5" + i + (j - 5));
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("互调") && i > (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) && i <= ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often)) {
			hh = (int) ((gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles + 1) * portRow * often);
			if (itemSet.add("互调")) {
			}
			if (inspectionItemSubclass.contains("相位绝对值")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("相位绝对值")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			int rr =ss==0?( qq == 0 ? (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh == 0 ? (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) : hh) : mm) : nn) : pp) : qq) : ss;
			if (i > ss) {
			if (itemSet.add("相位绝对值")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("互调")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//互调所在行
			//最大相位偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			@@ -4428,7 +5278,7 @@
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("互调∑2" + index);
			textRenderData.setText("最大相位偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			@@ -4452,11 +5302,11 @@
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			if ((i - ss) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//值
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			@@ -4466,16 +5316,16 @@
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			if ((i - ss) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("合格∑8" + index + ((i - ss) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("不合格∑8" + index + ((i - ss) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) + (angles - 1)) / (angles + 1) - 1));
			textRenderData.setText("不判定∑8" + index + ((i - ss) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			@@ -4485,15 +5335,19 @@
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 1)).getOften() + "∑6" + i + index);
			if ((i - ss) % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - ss) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg)) / portRow / (angles + 2)).getValue().split("\\],\\[");
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[((j - 5) + ((i - (gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg) - 1) / (angles + 1) % portRow) * (Math.min(ports, 8)))]);
			textRenderData.setText(split[(j - 5) + ((i - ss) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			@@ -4503,450 +5357,54 @@
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最大耦合度") && i > (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) && i <= ((hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) + (angles + 1))) {
			mm = ((hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) + (angles + 1));
			if (itemSet.add("最大耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最大耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("最小耦合度") && i > (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) && i <= ((mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) + (angles + 1))) {
			nn = (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) + (angles + 1);
			if (itemSet.add("最小耦合度")) {
			index.getAndIncrement();
			}
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最小耦合度")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			//最小耦合度所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最小耦合度∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm)) % (angles + 1) == 1) {
			//角度
			textRenderData.setText("角度");
			} else {
			//值
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index);
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index);
			} else {
			textRenderData.setText("不判定∑8" + index);
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm)) % (angles + 1) == 1) {
			//频点
			textRenderData.setText(result2s.get(0).getOften() + "∑6" + index);
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			textRenderData.setText(split[0] + "∑7" + i);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			if (inspectionItemSubclass.contains("幅度偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("幅度偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) && i <= (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) + k) {
			pp = (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) + k;
			if (itemSet.add("幅度偏差")) {
			index.getAndIncrement();
			}
			//幅度偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("幅度偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) % (angles + 1) == 1) {
			//频段
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			if (inspectionItemSubclass.contains("最大相位偏差")) {
			List<InsProduct> products = insProducts.stream().filter(insProduct -> insProduct.getInspectionItemSubclass().equals("最大相位偏差")).collect(Collectors.toList());
			List<InsProductResult2> result2s = productResult2s.stream()
			.filter(insProductResult2 -> insProductResult2.getFrequency().equals(s) && insProductResult2.getInsProductId().equals(products.get(0).getId()))
			.collect(Collectors.toList());
			int length = result2s.get(0).getPort().split(",").length;
			int portRow2 = (length % 8 == 0 ? length / 8 : length / 8 + 1);
			int k = (angles + 1) * portRow2;
			if (i > (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) {
			if (itemSet.add("最大相位偏差")) {
			index.getAndIncrement();
			}
			//最大相位偏差所在行
			if (j == 0) {
			//第一列
			textRenderData.setText(index + "∑1" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 1) {
			//第二列
			textRenderData.setText("最大相位偏差∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 2) {
			//第三列
			textRenderData.setText(products.get(0).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 3) {
			//第四列
			textRenderData.setText(products.get(0).getAsk() + "∑4" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == 4) {
			//第五列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//频段
			textRenderData.setText("频段");
			} else {
			//角度
			textRenderData.setText(result2s.get(0).getAngle().split(",")[(i + (angles - 1)) % (angles + 1)]);
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else if (j == bb - 1) {
			//最后一列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			textRenderData.setText("/");
			} else {
			//结论
			if (products.get(0).getInsResult() == 1) {
			textRenderData.setText("合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)));
			} else if (products.get(0).getInsResult() == 0) {
			textRenderData.setText("不合格∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)));
			} else {
			textRenderData.setText("不判定∑8" + index + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)));
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			} else {
			//其余列
			if ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) % (angles + 1) == 1) {
			//端口
			try {
			textRenderData.setText(result2s.get(0).getPort().split(",")[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			} else {
			//最差值
			String[] value = result2s.get(0).getValue().split("\\],\\[");
			String[] split = value[(i + (angles - 1)) % (angles + 1)].replaceAll("[\\[\\]\"]", "").split(",");
			try {
			textRenderData.setText(split[(j - 5) + ((i - (pp == 0 ? (nn == 0 ? (mm == 0 ? (hh==0?(gg == 0 ? (ff == 0 ? (ee == 0 ? ((dd == 0 ? cc : dd)) : ee) : ff) : gg):hh) : mm) : nn) : pp)) / (angles + 2)) * Math.min(length, 8)]);
			} catch (Exception e) {
			textRenderData.setText("");
			}
			}
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			}
			}
			}
			}
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			}
			}
			TableRenderData tableRenderData = new TableRenderData();
			tableRenderData.setRows(rows);
			int countSize = tableRenderData.getRows().get(0).getCells().size();
			for (RowRenderData row : tableRenderData.getRows()) {
			if (row.getCells().size() != countSize) {
			throw new ErrorException("每行单元格不相等");
			}
			rowRenderData.setCells(cells);
			if (rowRenderData.getCells().size() != 0) {
			rows.add(rowRenderData);
			}
			TableStyle tableStyle = new TableStyle();
			tableStyle.setWidth(XWPFTable.DEFAULT_PERCENTAGE_WIDTH);
			tableStyle.setAlign(TableRowAlign.CENTER);
			BorderStyle borderStyle = new BorderStyle();
			borderStyle.setColor("000000");
			borderStyle.setType(XWPFTable.XWPFBorderType.THICK);
			borderStyle.setSize(4);
			tableStyle.setLeftBorder(borderStyle);
			tableStyle.setTopBorder(borderStyle);
			tableStyle.setRightBorder(borderStyle);
			tableStyle.setBottomBorder(borderStyle);
			tableRenderData.setTableStyle(tableStyle);
			Map<String, Object> table2 = new HashMap<>();
			table2.put("table2", tableRenderData);
			table2.put("title", title);
			tables2.add(table2);
			lable.getAndIncrement();
			});
			}
			TableRenderData tableRenderData = new TableRenderData();
			tableRenderData.setRows(rows);
			int countSize = tableRenderData.getRows().get(0).getCells().size();
			for (RowRenderData row : tableRenderData.getRows()) {
			if (row.getCells().size() != countSize) {
			throw new ErrorException("每行单元格不相等");
			}
			}
			TableStyle tableStyle = new TableStyle();
			tableStyle.setWidth(XWPFTable.DEFAULT_PERCENTAGE_WIDTH);
			tableStyle.setAlign(TableRowAlign.CENTER);
			BorderStyle borderStyle = new BorderStyle();
			borderStyle.setColor("000000");
			borderStyle.setType(XWPFTable.XWPFBorderType.THICK);
			borderStyle.setSize(4);
			tableStyle.setLeftBorder(borderStyle);
			tableStyle.setTopBorder(borderStyle);
			tableStyle.setRightBorder(borderStyle);
			tableStyle.setBottomBorder(borderStyle);
			tableRenderData.setTableStyle(tableStyle);
			Map<String, Object> table2 = new HashMap<>();
			table2.put("table2", tableRenderData);
			table2.put("title", title);
			tables2.add(table2);
			lable.getAndIncrement();
			});
			}

			//电路报告用于总报告的方法(无源器件)
			private void getWord2(String term, InsOrderState insOrderState,List<Map<String, Object>> tables2){
			private void getWord2(String term, InsOrderState insOrderState, List<Map<String, Object>> tables2) {
			AtomicInteger index = new AtomicInteger();
			String title = term + "电路参数";
			//查询样品
			InsSample insSample = insSampleMapper.selectById(insOrderState.getInsSampleId());
			//查询项目
			List<InsProduct> insProducts = insProductMapper.selectList(Wrappers.<InsProduct>lambdaQuery()
			.eq(InsProduct::getState,1)
			.eq(InsProduct::getState, 1)
			.eq(InsProduct::getInsSampleId, insSample.getId())
			.eq(InsProduct::getSonLaboratory, "电路试验"));
			//计算行数
			@@ -4955,19 +5413,18 @@
			for (InsProductResult2VO insProductResult2VO : insProductResult2VOS) {
			String[] split = insProductResult2VO.getPort().split(",");
			String value = insProductResult2VO.getValue().replace("[[", "").replace("]]", "");
			if (split.length>1){
			if (split.length > 1) {
			for (int i = 0; i < split.length; i++) {
			InsProductResult2VO insProductResult2VO1 = new InsProductResult2VO();
			BeanUtils.copyProperties(insProductResult2VO,insProductResult2VO1);
			BeanUtils.copyProperties(insProductResult2VO, insProductResult2VO1);
			//端口
			insProductResult2VO1.setPort(split[i]);
			//值
			insProductResult2VO1.setValue(value.split(",")[i].replace("\"",""));
			insProductResult2VO1.setValue(value.split(",")[i].replace("\"", ""));
			result2VOS.add(insProductResult2VO1);
			}
			}
			else {
			insProductResult2VO.setValue(value.replace("\"",""));
			} else {
			insProductResult2VO.setValue(value.replace("\"", ""));
			result2VOS.add(insProductResult2VO);
			}
			}
			@@ -4997,7 +5454,7 @@
			style.setFontFamily("宋体");
			style.setColor("000000");
			textRenderData.setStyle(style);
			if (j==0){
			if (j == 0) {
			//第一列(序号)
			if (itemSet.add(result2VOS.get(i).getInspectionItemSubclass())) {
			index.getAndIncrement();
			@@ -5008,26 +5465,23 @@
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==1){
			} else if (j == 1) {
			//第二列(检验项目)
			textRenderData.setText(result2VOS.get(i).getInspectionItemSubclass()+ "∑2" + index);
			textRenderData.setText(result2VOS.get(i).getInspectionItemSubclass() + "∑2" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==2){
			} else if (j == 2) {
			//第三列(单位)
			textRenderData.setText(result2VOS.get(i).getUnit()+ "∑3" + index);
			textRenderData.setText(result2VOS.get(i).getUnit() + "∑3" + index);
			renderData.add(textRenderData);
			paragraphRenderData.setContents(renderData);
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==3){
			} else if (j == 3) {
			//第四列(标准与要求)
			textRenderData.setText(result2VOS.get(i).getAsk());
			renderData.add(textRenderData);
			@@ -5035,12 +5489,11 @@
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==4){
			} else if (j == 4) {
			//第五列(端口)
			try{
			try {
			textRenderData.setText(result2VOS.get(i).getPort());
			}catch (Exception e){
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			@@ -5048,12 +5501,11 @@
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==5){
			} else if (j == 5) {
			//第六列(频段)
			try{
			try {
			textRenderData.setText(result2VOS.get(i).getFrequency());
			}catch (Exception e){
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			@@ -5061,12 +5513,11 @@
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else if (j==6){
			} else if (j == 6) {
			//第七列(检验值)
			try{
			try {
			textRenderData.setText(result2VOS.get(i).getValue());
			}catch (Exception e){
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			@@ -5074,18 +5525,17 @@
			paragraphRenderDataList.add(paragraphRenderData);
			cellRenderData.setParagraphs(paragraphRenderDataList);
			cells.add(cellRenderData);
			}
			else {
			} else {
			//最后一列(结论)
			try{
			try {
			if (result2VOS.get(i).getResult().equals("1")) {
			textRenderData.setText("合格");
			}else if (result2VOS.get(i).getResult().equals("0")){
			} else if (result2VOS.get(i).getResult().equals("0")) {
			textRenderData.setText("不合格");
			}else {
			} else {
			textRenderData.setText("不判定");
			}
			}catch (Exception e){
			} catch (Exception e) {
			textRenderData.setText("");
			}
			renderData.add(textRenderData);
			@@ -5147,4 +5597,4 @@
			}
			}
			}
			}
			}