除附件

yyb

4 天以前 491585f7ad453d889f71dc549f6a4d3dee74828f

除附件

 src/api/routingInspection/routingInspection.ts

@@ -34,6 +34,22 @@
      // data: params,
    });
  },
  // 拉丝巡检保存
  drawPatrolCheckInspection(data: any) {
    return request<BaseResult<any>>({
      url: "/wireInspection/drawPatrolCheckInspection?deviceUid=" + data.deviceUid,
      method: "POST",
      data: data,
    });
  },
  // 绞线巡检保存
  strandedPatrolCheckInspection(data: any) {
    return request<BaseResult<any>>({
      url: "/wireInspection/strandedPatrolCheckInspection?deviceUid=" + data.deviceUid,
      method: "POST",
      data: data,
    });
  },
};

export default RoutingInspectionApi;

 src/pages/routingInspection/detail/indexJX.vue

@@ -73,11 +73,22 @@
        <wd-form-item label="张力设置" prop="twistTension">
          {{ formatValue(recordData.fixedInfo?.twistTension, "N/m") }}
        </wd-form-item>
        <wd-form-item label="绞制外径" prop="twistDiameter">
          {{ formatValue(recordData.inspectionResult?.twistDiameter, "mm") }}
        <!-- 绞制外径（可编辑） -->
        <wd-form-item label="绞制外径" prop="twistDiameter" required>
          <template v-if="isEdit">
            <wd-input
              v-model="formData.twistDiameter"
              placeholder="请输入绞制外径（mm）"
              type="number"
            />
          </template>
          <template v-else>
            {{ formatValue(formData.twistDiameter, "mm") }}
          </template>
        </wd-form-item>
      </wd-col>
    </wd-row>

    <!-- 自检记录详情模块 -->
    <wd-row>
      <view style="margin: 10rpx">
@@ -97,27 +108,32 @@
        </wd-form-item>
      </wd-col>
    </wd-row>

    <!-- 结构检查模块 -->
    <wd-row>
      <view style="margin: 10rpx">
        <text class="title">{{ "结构检查" }}</text>
      </view>
      <wd-col :span="24">
        <wd-form-item label="成品结构" prop="inspectStructure">
          {{
            recordData.structureInfo.structureRecordResult.inspectStructure.structureFormula || "-"
          }}
        <wd-form-item label="成品结构" prop="structureFormula" required>
          <template v-if="isEdit">
            <wd-input v-model="formData.structureFormula" placeholder="请输入成品结构" />
          </template>
          <template v-else>
            {{ formData.structureFormula || "-" }}
          </template>
        </wd-form-item>
      </wd-col>
    </wd-row>
    <wd-row v-if="recordData.structureInfo.structureRecordResult.inspectStructure.structureItems">

    <!-- 结构标准值和实测（可编辑） -->
    <wd-row v-if="formData.structureItems.length">
      <view style="margin: 10rpx">
        <text class="title">{{ "结构标准值和实测" }}</text>
      </view>
      <wd-col
        :span="24"
        v-for="(item, index) in recordData.structureInfo.structureRecordResult.inspectStructure
          .structureItems"
        v-for="(item, index) in formData.structureItems"
        :key="index"
        style="padding-bottom: 10px"
      >
@@ -125,26 +141,42 @@
          :label="formatValue(item.structureName)"
          label-width="400rpx"
          style="color: red"
          required
        ></wd-form-item>
        <wd-form-item label="标准值" prop="structureValue">
        <wd-form-item label="标准值" prop="structureValue" required>
          {{ formatValue(item.structureValue) }}
        </wd-form-item>
        <wd-form-item label="实测根数" prop="actualValue1">
          {{ formatValue(item.actualValue1, "根") }}
        <wd-form-item label="实测根数" prop="actualValue1" required>
          <template v-if="isEdit">
            <wd-input v-model="item.actualValue1" placeholder="请输入实测根数" type="number" />
          </template>
          <template v-else>
            {{ formatValue(item.actualValue1, "根") }}
          </template>
        </wd-form-item>
        <wd-form-item label="实测直径" prop="actualValue2">
          {{ formatValue(item.actualValue2, "mm") }}
        <wd-form-item label="实测直径" prop="actualValue2" required>
          <template v-if="isEdit">
            <wd-input
              v-model="item.actualValue2"
              placeholder="请输入实测直径（mm）"
              type="number"
            />
          </template>
          <template v-else>
            {{ formatValue(item.actualValue2, "mm") }}
          </template>
        </wd-form-item>
      </wd-col>
    </wd-row>
    <!-- 绞线工艺质量控制模块 -->
    <wd-row v-if="recordData.structureInfo?.structureRecordResult?.inspectTwist">

    <!-- 绞线工艺质量控制（可编辑） -->
    <wd-row v-if="formData.inspectTwist.length">
      <view style="margin: 10rpx">
        <text class="title">{{ "绞线工艺质量控制" }}</text>
      </view>
      <wd-col
        :span="24"
        v-for="(item, index) in recordData.structureInfo.structureRecordResult.inspectTwist"
        v-for="(item, index) in formData.inspectTwist"
        :key="index"
        style="padding-bottom: 10px"
      >
@@ -152,57 +184,115 @@
          :label="formatValue(item.twistName)"
          label-width="400rpx"
          style="color: red"
          required
        ></wd-form-item>
        <wd-form-item label="绞向" prop="direction">
          {{ formatValue(item.direction) }}
        <wd-form-item label="绞向" prop="direction" required>
          <template v-if="isEdit">
            <wd-select-picker
              label=""
              v-model="item.direction"
              :columns="twistDirectionOptions"
              type="radio"
              placeholder="请选择绞向"
              :clearable="false"
            ></wd-select-picker>
          </template>
          <template v-else>
            {{ formatValue(item.direction) }}
          </template>
        </wd-form-item>
        <wd-form-item label="节距" prop="pitch">{{ formatValue(item.pitch, "mm") }}</wd-form-item>
        <wd-form-item label="节径比" prop="pitchRatio">
        <wd-form-item label="节距" prop="pitch" required>
          <template v-if="isEdit">
            <wd-input v-model="item.pitch" placeholder="请输入节距（mm）" type="number" />
          </template>
          <template v-else>
            {{ formatValue(item.pitch, "mm") }}
          </template>
        </wd-form-item>
        <wd-form-item label="节径比" prop="pitchRatio" required>
          {{ formatValue(item.pitchRatio) }}
        </wd-form-item>
      </wd-col>
    </wd-row>
    <!-- 外观和结论模块 -->

    <!-- 外观和结论（可编辑） -->
    <wd-row>
      <view style="margin: 10rpx">
        <text class="title">{{ "外观和结论" }}</text>
      </view>
      <wd-col :span="24">
        <wd-form-item label="结论" prop="conclusion">
          {{ formatValue(recordData.structureInfo.structureRecordResult.conclusion) }}
        <wd-form-item label="产品外观" prop="productAppearance" required>
          <template v-if="isEdit">
            <wd-checkbox-group
              v-model="formData.productAppearance"
              inline
              v-for="(opt, idx) in appearanceOptions"
              :key="idx"
              style="text-align: justify"
            >
              <wd-checkbox :modelValue="opt.value" style="width: 100px">
                {{ opt.label }}
              </wd-checkbox>
            </wd-checkbox-group>
          </template>
          <template v-else>
            {{ formatProductAppearance(formData.productAppearance) }}
          </template>
        </wd-form-item>
        <wd-form-item label="产品外观" prop="productAppearance">
          {{
            formatProductAppearance(
              recordData.structureInfo.structureRecordResult.productAppearance
            )
          }}
        <wd-form-item label="结论" prop="conclusion" required>
          <template v-if="isEdit">
            <wd-radio-group v-model="formData.conclusion" inline class="conclusion-radio-group">
              <wd-radio
                v-for="(opt, idx) in conclusionOptions"
                :key="idx"
                :value="opt.value"
                shape="dot"
              >
                {{ opt.label }}
              </wd-radio>
            </wd-radio-group>
          </template>
          <template v-else>
            {{ formatValue(formData.conclusion) }}
          </template>
        </wd-form-item>
      </wd-col>
    </wd-row>

    <!-- 巡检结果模块 -->
    <wd-row>
      <view style="margin: 10rpx">
        <text class="title">{{ "巡检结果" }}</text>
      </view>
      <wd-col :span="24">
        <wd-form-item label="样品是否齐全" prop="sampleComplete">
          {{ formatValue(recordData.inspectionResult?.sampleComplete) }}
        <wd-form-item label="样品是否齐全" prop="sampleComplete" required>
          <template v-if="isEdit">
            <wd-radio-group v-model="formData.sampleComplete" inline class="conclusion-radio-group">
              <wd-radio
                v-for="(opt, idx) in sampleCompleteOptions"
                :key="idx"
                :value="opt.value"
                shape="dot"
              >
                {{ opt.label }}
              </wd-radio>
            </wd-radio-group>
          </template>
          <template v-else>
            {{ formatValue(formData.sampleComplete) }}
          </template>
        </wd-form-item>
      </wd-col>
    </wd-row>
    <!-- 附件模块 -->

    <!-- 附件模块（含上传功能） -->
    <wd-row class="attachment-section">
      <view style="margin: 10rpx">
        <text class="title">{{ "附件" }}</text>
      </view>
      <!-- 用 flex 容器包裹图片列，实现自动换行 -->
      <view class="attachment-grid">
        <wd-col
          v-for="(file, index) in recordData.structureInfo.files"
          :key="index"
          class="attachment-item"
        >
        <!-- 已上传附件（包含新上传的） -->
        <wd-col v-for="(file, index) in allFiles" :key="file.id || index" class="attachment-item">
          <wd-img :width="80" :height="80" :src="file.url" @click="previewImage(file.url)">
            <template #error>
              <view class="error-wrap">加载失败</view>
@@ -213,26 +303,276 @@
              </view>
            </template>
          </wd-img>
          <!-- 编辑模式下显示删除按钮 -->
          <!-- <wd-icon
            v-if="isEdit"
            name="close-circle"
            class="delete-icon"
            @click.stop="deleteFile(file.id || index)"
          ></wd-icon> -->
        </wd-col>
        <!-- 上传按钮（仅编辑模式显示） -->
        <wd-col v-if="isEdit" class="attachment-item upload-btn">
          <wd-upload
            :multiple="true"
            :max-count="5"
            :before-upload="beforeUpload"
            @success="handleUploadSuccess"
            @fail="handleUploadFail"
          >
            <view class="upload-icon">+</view>
          </wd-upload>
        </wd-col>
      </view>
    </wd-row>

    <wd-popup v-model="show" custom-style="border-radius:32rpx;" @close="handleClose">
      <div class="image-preview">
        <img :src="previewImageUrl" alt="预览图片" style="width: 100%; height: auto" />
      </div>
    </wd-popup>
    <Scan ref="scanRef" emitName="scan" />
    <wd-toast />
  </view>
</template>

<script setup lang="ts">
import { ref, reactive, computed } from "vue";
import { onLoad } from "@dcloudio/uni-app";
import RoutingInspectionApi from "@/api/routingInspection/routingInspection";
import Scan from "@/components/scan/index.vue";
import { useToast } from "wot-design-uni";

// 核心状态
const paramsId = ref("");
const recordData = ref<any>({});
const recordData = ref<any>({ structureInfo: { files: [], structureRecordResult: {} } });
const show = ref(false);
const previewImageUrl = ref("");
const isEdit = ref(false);
const tempFiles = ref<any[]>([]); // 临时存储新上传的附件
const deviceUid = ref("");
const scanRef = ref();
const toast = useToast();

// 表单临时数据（编辑模式绑定）
const formData = reactive({
  twistDiameter: "", // 绞制外径
  structureFormula: "", // 成品结构
  structureItems: [], // 结构标准值和实测
  inspectTwist: [], // 绞线工艺质量控制
  productAppearance: [] as string[], // 产品外观（改为数组存储选中值）
  conclusion: "", // 结论（改为数组存储选中值）
  sampleComplete: "", // 样品是否齐全
});

// 选项数据
const twistDirectionOptions = [
  { label: "左向", value: "左向" },
  { label: "右向", value: "右向" },
];

const appearanceOptions = [
  { label: "无外观问题", value: "无外观问题" },
  { label: "表面划伤", value: "表面划伤" },
  { label: "直径不均", value: "直径不均" },
  { label: "其他缺陷", value: "其他缺陷" },
];

const conclusionOptions = [
  { label: "合格", value: "合格" },
  { label: "不合格", value: "不合格" },
];
const sampleCompleteOptions = [
  { label: "是", value: "是" },
  { label: "否", value: "否" },
];

// 合并原有附件和新上传附件
const allFiles = computed(() => {
  return [...(recordData.value.structureInfo?.files || []), ...tempFiles.value];
});

// 初始化表单数据（接口数据同步到表单）
const initFormData = () => {
  const structureResult = recordData.value.structureInfo?.structureRecordResult || {};
  const inspectionResult = recordData.value.inspectionResult || {};

  // 基础可编辑字段
  formData.twistDiameter = inspectionResult.twistDiameter || "";
  formData.structureFormula = structureResult.inspectStructure?.structureFormula || "";
  formData.sampleComplete = inspectionResult.sampleComplete || "";
  formData.conclusion = structureResult.conclusion || "";
  // 修复产品外观和结论的数据格式
  formData.productAppearance = Array.isArray(structureResult.productAppearance)
    ? structureResult.productAppearance
    : structureResult.productAppearance
    ? [structureResult.productAppearance]
    : [];

  // 循环类字段（深拷贝避免原数据污染）
  formData.structureItems = JSON.parse(
    JSON.stringify(structureResult.inspectStructure?.structureItems || [])
  );
  formData.inspectTwist = JSON.parse(JSON.stringify(structureResult.inspectTwist || []));

  // 初始化绞向数据（确保有值）
  formData.inspectTwist.forEach((item: any) => {
    if (!item.direction) item.direction = "";
  });
};

// 获取详情数据
const getDetailData = async (id: string, deviceType: string) => {
  try {
    const response = await RoutingInspectionApi.getStrandedInspectionStructureInfoById({ id });
    recordData.value = response.data;
    tempFiles.value = []; // 清空临时文件
    initFormData(); // 数据返回后初始化表单
  } catch (error) {
    console.error("获取详情失败:", error);
    uni.showToast({ title: "加载失败", icon: "error" });
  }
};

// 页面加载
onLoad((options: any) => {
  paramsId.value = options.id;
  getDetailData(options.id, options.deviceType);
});

// 编辑模式切换
const editList = () => {
  isEdit.value = true;
};

// 取消编辑（重置表单）
const close = () => {
  isEdit.value = false;
  tempFiles.value = []; // 取消时清空临时上传的文件
  initFormData(); // 恢复原始数据
};

// 保存编辑（含必填项校验）
const saveList = async () => {
  // 1. 基础字段校验
  if (!formData.structureFormula) return uni.showToast({ title: "成品结构为必填项", icon: "none" });
  if (!formData.twistDiameter) return uni.showToast({ title: "绞制外径为必填项", icon: "none" });
  if (!formData.productAppearance.length)
    return uni.showToast({ title: "产品外观为必填项", icon: "none" });
  if (!formData.conclusion) return uni.showToast({ title: "结论为必填项", icon: "none" });
  if (!formData.sampleComplete)
    return uni.showToast({ title: "样品是否齐全为必填项", icon: "none" });
  // 2. 结构项循环校验
  for (const item of formData.structureItems) {
    if (!item.structureValue)
      return uni.showToast({ title: `${item.structureName}标准值为必填项`, icon: "none" });
    if (!item.actualValue1)
      return uni.showToast({ title: `${item.structureName}实测根数为必填项`, icon: "none" });
    if (!item.actualValue2)
      return uni.showToast({ title: `${item.structureName}实测直径为必填项`, icon: "none" });
  }

  // 3. 绞线工艺项循环校验
  for (const item of formData.inspectTwist) {
    if (!item.direction)
      return uni.showToast({ title: `${item.twistName}绞向为必填项`, icon: "none" });
    if (!item.pitch) return uni.showToast({ title: `${item.twistName}节距为必填项`, icon: "none" });
    if (!item.pitchRatio)
      return uni.showToast({ title: `${item.twistName}节径比为必填项`, icon: "none" });
  }
  console.log("1111", deviceUid.value);
  if (!deviceUid.value) return uni.showToast({ title: "请扫描二维码", icon: "none" });
  // 4. 提交数据到接口
  try {
    const res = await RoutingInspectionApi.strandedPatrolCheckInspection({
      deviceUid: deviceUid.value,
      id: paramsId.value,
      result: {
        twistDiameter: formData.twistDiameter,
        structureFormula: formData.structureFormula,
        structureItems: formData.structureItems,
        inspectTwist: formData.inspectTwist,
        productAppearance: formData.productAppearance,
        conclusion: formData.conclusion,
        sampleComplete: formData.sampleComplete,
      },
      inspectionResult: {
        sampleComplete: formData.sampleComplete,
      },
      processInspectionAttachmentList: tempFiles.value.map((f) => f.url), // 新上传的附件
    });

    if (res.code === 200) {
      uni.showToast({ title: "保存成功", icon: "success" });
      isEdit.value = false;
      getDetailData(paramsId.value, recordData.value.deviceType); // 刷新数据
    } else {
      uni.showModal({ title: res.msg || "保存失败", icon: "error" });
    }
  } catch (e) {
    console.error("保存失败:", e);
    uni.showModal({ title: e.message || "保存失败", icon: "error" });
  }
};

// 附件上传前置校验
const beforeUpload = (file: any) => {
  // 限制图片大小不超过2M
  const maxSize = 2 * 1024 * 1024;
  if (file.size > maxSize) {
    uni.showToast({ title: "图片大小不能超过2M", icon: "none" });
    return false;
  }
  return true;
};

// 附件上传成功回调
const handleUploadSuccess = (res: any) => {
  // 假设接口返回格式: { url: 'xxx', id: 'xxx' }
  if (Array.isArray(res)) {
    tempFiles.value = [
      ...tempFiles.value,
      ...res.map((file) => ({
        ...file,
        id: `temp-${Date.now()}-${Math.random().toString(36).substr(2, 9)}`, // 生成临时ID
      })),
    ];
  } else {
    tempFiles.value.push({
      ...res,
      id: `temp-${Date.now()}-${Math.random().toString(36).substr(2, 9)}`,
    });
  }
};

// 附件上传失败回调
const handleUploadFail = (err: any) => {
  uni.showToast({ title: "附件上传失败", icon: "error" });
};

// 删除附件
const deleteFile = (id: string | number) => {
  // 删除临时文件
  tempFiles.value = tempFiles.value.filter((file) => file.id !== id);

  // 如果是原有文件，需要标记删除（实际项目中可能需要接口交互）
  if (typeof id !== "string" || !id.startsWith("temp-")) {
    // 这里可以实现删除原有文件的逻辑
    recordData.value.structureInfo.files = recordData.value.structureInfo.files.filter(
      (file: any, index: number) => index !== id
    );
  }
};

// 图片预览
const previewImage = (url: string) => {
  previewImageUrl.value = url;
  show.value = true;
};

const handleClose = () => {
  show.value = false;
};

// 状态类型映射
const getStatusType = (status: number) => {
@@ -266,12 +606,6 @@
  }
};

// 获取外观文本
const getAppearanceText = (appearance: string[]) => {
  if (!appearance || appearance.length === 0) return "-";
  return appearance.join("、");
};

// 格式化产品外观显示
const formatProductAppearance = (productAppearance: string[]) => {
  if (!productAppearance || productAppearance.length === 0) return "-";
@@ -294,82 +628,40 @@
  });
};

// 格式化结构值显示
const formatStructureValue = (value1: any, value2: any) => {
  const val1 = value1 || "-";
  const val2 = value2 ? `${value2}mm` : "-";
  return { count: val1, diameter: val2 };
const openScan = () => {
  scanRef.value.triggerScan();
};

const getDetailData = async (id: string, deviceType: string) => {
const getScanCode = (params: any) => {
  console.log("完整参数：", params);
  let codeObj = {};
  try {
    let response;
    // 获取绞线单个结构
    response = await RoutingInspectionApi.getStrandedInspectionStructureInfoById({
      id: id,
    });
    recordData.value = response.data;
    console.log(recordData.value);
  } catch (error) {
    console.error("获取详情失败:", error);
    codeObj = JSON.parse(params.code);
  } catch (err) {
    console.error("JSON解析失败：", err);
    toast.error("扫码数据异常");
    return; // 解析失败直接返回，避免后续错误
  }
  deviceUid.value = codeObj?.uid;
  toast.success("扫码成功");
};

onLoad((options: any) => {
  paramsId.value = options.id;
  getDetailData(options.id, options.deviceType);
// 确保先移除再添加监听
const setupScanListener = () => {
  uni.$off("scan", getScanCode); // 先移除旧的
  uni.$on("scan", getScanCode); // 再添加新的
};
onUnmounted(() => {
  // 开启广播监听事件
  uni.$off("scan", getScanCode);
  console.log("离开1");
});

const previewImage = (url: string) => {
  previewImageUrl.value = url;
  show.value = true;
};

const handleClose = () => {
  show.value = false;
};

// 编辑列表
const editList = () => {};

// 关闭
const close = () => {};

// 保存列表
const saveList = async () => {
  // try {
  //   let response;
  //   // 保存列表
  //   response = await RoutingInspectionApi.saveStrandedInspectionStructureInfo({
  //     id: paramsId.value,
  //     structureInfo: recordData.value.structureInfo,
  //   });
  //   if (response.code === 200) {
  //     uni.showToast({
  //       title: "保存成功",
  //       icon: "success",
  //     });
  //     // 刷新详情数据
  //     getDetailData(paramsId.value, recordData.value.deviceType);
  //   } else {
  //     uni.showToast({
  //       title: response.msg || "保存失败",
  //       icon: "error",
  //     });
  //   }
  // } catch (error) {
  //   console.error("保存列表失败:", error);
  //   uni.showToast({
  //     title: "保存失败",
  //     icon: "error",
  //   });
  // }
};
onMounted(() => {
  // 开启广播监听事件
  setupScanListener();
  console.log("显示1");
});
</script>

<style lang="scss" scoped>
.placeholder {
  flex: 1;
}
.fixed-header {
  position: fixed;
  top: 44;
@@ -391,14 +683,8 @@
  gap: 10px;
}

.search-wrapper {
.placeholder {
  flex: 1;
  min-width: 0;
}

:deep(.search-wrapper .wd-search) {
  width: 100% !important;
  min-width: 0 !important;
}

.scan-wrapper {
@@ -413,11 +699,11 @@

.list {
  padding: 12px;

  padding-top: 84px;
  background: #f3f9f8;
  min-height: 100vh;
  box-sizing: border-box;
  overflow-y: auto;
}

.title {
@@ -439,6 +725,20 @@
  border-radius: 2px;
}

// 产品外观和结论选择器样式（一行两个）
.checkbox-group {
  display: flex;
  flex-wrap: wrap;
  gap: 16rpx;
  padding: 8rpx 0;
}

.checkbox-item {
  width: calc(50% - 8rpx);
  margin-bottom: 8rpx;
}

// 附件相关样式
.attachment-section {
  width: 100%;
}
@@ -453,6 +753,39 @@
.attachment-item {
  width: calc(25% - 10px);
  box-sizing: border-box;
  position: relative;
}

.upload-btn {
  width: 80px;
  height: 80px;
  display: flex;
  align-items: center;
  justify-content: center;
  border: 1px dashed #ccc;
  border-radius: 4px;
  box-sizing: border-box;
}

.upload-icon {
  font-size: 32px;
  color: #0d867f;
}

// 附件删除图标
.delete-icon {
  position: absolute;
  top: -8px;
  right: -8px;
  width: 24px;
  height: 24px;
  background-color: rgba(255, 0, 0, 0.8);
  color: white;
  border-radius: 50%;
  display: flex;
  align-items: center;
  justify-content: center;
  z-index: 10;
}

@media (max-width: 768px) {
@@ -460,4 +793,36 @@
    width: calc(25% - 10px);
  }
}
</style>

// 编辑模式下表单组件样式优化
:deep(.wd-form-item) {
  margin-bottom: 8rpx;
}

:deep(.wd-input, .wd-select, .wd-radio-group, .wd-checkbox-group) {
  width: 100%;
  box-sizing: border-box;
}

:deep(.wd-form-item__label) {
  &::after {
    content: "*";
    color: red;
    margin-left: 4rpx;
  }
}

// 修复选择器样式
:deep(.wd-select) {
  width: 100%;
}

:deep(.wd-checkbox) {
  margin-right: 0;
}
.conclusion-radio-group {
  display: flex;
  align-items: flex-start; // 垂直方向顶部对齐（上移关键）
  gap: 20rpx; // 选项之间的间距
}
</style>

 src/pages/routingInspection/detail/indexLS.vue

@@ -68,7 +68,6 @@
          <wd-form-item label="型号" prop="poleModel">
            {{ formatValue(detailData.fixedInfo?.poleModel) }}
          </wd-form-item>

          <wd-form-item label="批次" prop="poleNumber">
            {{ formatValue(detailData.fixedInfo?.poleNumber) }}
          </wd-form-item>
@@ -80,6 +79,7 @@
          </wd-form-item>
        </wd-col>
      </wd-row>

      <!-- 自检记录详情模块 -->
      <wd-row>
        <view style="margin: 10rpx">
@@ -96,6 +96,7 @@
          </wd-form-item>
        </wd-col>
      </wd-row>

      <!-- 检验结果 -->
      <wd-row>
        <view style="margin: 10rpx">
@@ -105,52 +106,186 @@
          <wd-form-item label="单丝直径" prop="dia">
            {{ formatValue(detailData.inspectionResult?.dia, "mm") || "-" }}
          </wd-form-item>
          <wd-form-item label="最大直径" prop="maxDia">
            {{ formatValue(detailData.inspectionResult?.maxDia, "mm") || "-" }}

          <wd-form-item label="最大直径" prop="maxDia" required>
            <template v-if="isEdit">
              <wd-input v-model="formData.maxDia" placeholder="请输入最大直径(mm)" type="number" />
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.maxDia, "mm") || "-" }}
            </template>
          </wd-form-item>
          <wd-form-item label="最小直径" prop="minDia">
            {{ formatValue(detailData.inspectionResult?.minDia, "mm") || "-" }}

          <wd-form-item label="最小直径" prop="minDia" required>
            <template v-if="isEdit">
              <wd-input v-model="formData.minDia" placeholder="请输入最小直径(mm)" type="number" />
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.minDia, "mm") || "-" }}
            </template>
          </wd-form-item>
          <wd-form-item label="外观" prop="appearance">
            {{ formatProductAppearance(detailData.inspectionResult?.appearance) || "-" }}

          <wd-form-item label="外观" prop="appearance" required>
            <template v-if="isEdit">
              <wd-checkbox-group
                v-model="formData.appearance"
                inline
                v-for="(opt, idx) in appearanceOptions"
                :key="idx"
                style="text-align: justify"
              >
                <wd-checkbox :modelValue="opt.value" style="width: 100px">
                  {{ opt.label }}
                </wd-checkbox>
              </wd-checkbox-group>
            </template>
            <template v-else>
              {{
                formatProductAppearance(detailData.inspectionResult?.appearance).join("、") || "-"
              }}
            </template>
          </wd-form-item>
          <wd-form-item label="卷绕紧密" prop="windingTightness">
            {{ formatValue(detailData.inspectionResult?.windingTightness) }}

          <wd-form-item label="卷绕紧密" prop="windingTightness" required>
            <template v-if="isEdit">
              <wd-radio-group
                v-model="formData.windingTightness"
                inline
                class="conclusion-radio-group"
              >
                <wd-radio
                  v-for="(opt, idx) in sampleCompleteOptions"
                  :key="idx"
                  :value="opt.value"
                  shape="dot"
                >
                  {{ opt.label }}
                </wd-radio>
              </wd-radio-group>
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.windingTightness) }}
            </template>
          </wd-form-item>
          <wd-form-item label="排列整齐" prop="arrangementNeatness">
            {{ formatValue(detailData.inspectionResult?.arrangementNeatness) }}

          <wd-form-item label="排列整齐" prop="arrangementNeatness" required>
            <template v-if="isEdit">
              <wd-radio-group
                v-model="formData.arrangementNeatness"
                inline
                class="conclusion-radio-group"
              >
                <wd-radio
                  v-for="(opt, idx) in sampleCompleteOptions"
                  :key="idx"
                  :value="opt.value"
                  shape="dot"
                >
                  {{ opt.label }}
                </wd-radio>
              </wd-radio-group>
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.arrangementNeatness) }}
            </template>
          </wd-form-item>

          <wd-form-item
            label="外层铝线离侧板边缘距离"
            prop="aluminumWireDistance"
            label-width="500rpx"
            label-width="360rpx"
            required
          >
            {{ formatValue(detailData.inspectionResult?.aluminumWireDistance, "mm") || "-" }}
            <template v-if="isEdit">
              <wd-input
                v-model="formData.aluminumWireDistance"
                placeholder="请输入距离(mm)"
                type="number"
              />
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.aluminumWireDistance, "mm") || "-" }}
            </template>
          </wd-form-item>
          <wd-form-item label="成品模后接头情况" prop="jointCondition" label-width="250rpx">
            {{ formatValue(detailData.inspectionResult?.jointCondition) || "-" }}

          <wd-form-item
            label="成品模后接头情况"
            prop="jointCondition"
            label-width="280rpx"
            required
          >
            <template v-if="isEdit">
              <wd-radio-group
                v-model="formData.jointCondition"
                inline
                class="conclusion-radio-group"
              >
                <wd-radio
                  v-for="(opt, idx) in jointConditionOptions"
                  :key="idx"
                  :value="opt.value"
                  shape="dot"
                >
                  {{ opt.label }}
                </wd-radio>
              </wd-radio-group>
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.jointCondition) || "-" }}
            </template>
          </wd-form-item>
          <wd-form-item label="结论" prop="conclusion">
            {{ formatValue(detailData.inspectionResult?.conclusion) || "-" }}

          <wd-form-item label="结论" prop="conclusion" required>
            <template v-if="isEdit">
              <wd-radio-group v-model="formData.conclusion" inline class="conclusion-radio-group">
                <wd-radio
                  v-for="(opt, idx) in conclusionOptions"
                  :key="idx"
                  :value="opt.value"
                  shape="dot"
                >
                  {{ opt.label }}
                </wd-radio>
              </wd-radio-group>
            </template>
            <template v-else>
              {{ formatValue(detailData.inspectionResult?.conclusion) || "-" }}
            </template>
          </wd-form-item>
        </wd-col>
      </wd-row>

      <!-- 巡检结果 -->
      <wd-row v-if="detailData.processInspectionResult?.isFully">
        <view style="margin: 10rpx">
          <text class="title">{{ "巡检结果" }}</text>
        </view>
        <wd-col :span="24">
          <wd-form-item label="铝杆前、中、尾样品是否齐全" prop="processInspectionUserName">
            <wd-tag
              custom-class="space"
              :type="detailData.processInspectionResult?.isFully ? 'success' : 'danger'"
            >
              {{ detailData.processInspectionResult?.isFully ? "是" : "否" }}
            </wd-tag>
          <wd-form-item label="铝杆前、中、尾样品是否齐全" prop="isFully" required>
            <template v-if="isEdit">
              <wd-radio-group v-model="formData.isFully" inline class="conclusion-radio-group">
                <wd-radio
                  v-for="(opt, idx) in sampleCompleteOptions"
                  :key="idx"
                  :value="opt.value"
                  shape="dot"
                >
                  {{ opt.label }}
                </wd-radio>
              </wd-radio-group>
            </template>
            <template v-else>
              <wd-tag
                custom-class="space"
                :type="detailData.processInspectionResult?.isFully ? 'success' : 'danger'"
              >
                {{ detailData.processInspectionResult?.isFully ? "是" : "否" }}
              </wd-tag>
            </template>
          </wd-form-item>
        </wd-col>
      </wd-row>

      <!-- 附件模块 -->
      <wd-row class="attachment-section" v-if="detailData.files && detailData.files.length > 0">
        <view style="margin: 10rpx">
@@ -159,15 +294,29 @@
        <view class="attachment-grid">
          <wd-col v-for="(file, index) in detailData.files" :key="index" class="attachment-item">
            <wd-img :width="80" :height="80" :src="file.url" @click="previewImage(file.url)">
              <template #error>
                <view class="error-wrap">加载失败</view>
              </template>
              <template #error><view class="error-wrap">加载失败</view></template>
              <template #loading>
                <view class="loading-wrap">
                  <wd-loading />
                </view>
                <view class="loading-wrap"><wd-loading /></view>
              </template>
            </wd-img>
            <!-- <wd-icon
              v-if="isEdit"
              name="close-circle"
              class="delete-icon"
              @click.stop="deleteFile(index)"
            ></wd-icon> -->
          </wd-col>
          <wd-col v-if="isEdit" class="attachment-item upload-btn">
            <wd-upload
              :multiple="true"
              :max-count="5"
              :before-upload="beforeUpload"
              @success="handleUploadSuccess"
              @fail="handleUploadFail"
              accept="all"
            >
              <view class="upload-icon">+</view>
            </wd-upload>
          </wd-col>
        </view>
      </wd-row>
@@ -177,36 +326,77 @@
        <img :src="previewImageUrl" alt="预览图片" style="width: 100%; height: auto" />
      </div>
    </wd-popup>
    <Scan ref="scanRef" emitName="scan" />
    <wd-toast />
  </view>
</template>

<script setup lang="ts">
import { ref, reactive } from "vue";
import { onLoad } from "@dcloudio/uni-app";
import RoutingInspectionApi from "@/api/routingInspection/routingInspection";

import Scan from "@/components/scan/index.vue";
import { useToast } from "wot-design-uni";
// 核心状态
const paramsId = ref("");
const detailData = ref<any>({});
const show = ref(false);
const previewImageUrl = ref("");
const isEdit = ref(false);
const tempFiles = ref<any[]>([]);
const deviceUid = ref("");
const scanRef = ref();
const toast = useToast();

// 状态类型映射
// 表单数据
const formData = reactive({
  dia: "",
  maxDia: "",
  minDia: "",
  appearance: "",
  windingTightness: "",
  arrangementNeatness: "",
  aluminumWireDistance: "",
  jointCondition: "",
  conclusion: "",
  isFully: "",
});

// 外观选项
const appearanceOptions = [
  { label: "无外观问题", value: "无外观问题" },
  { label: "表面划伤", value: "表面划伤" },
  { label: "直径不均", value: "直径不均" },
  { label: "其他缺陷", value: "其他缺陷" },
];
const sampleCompleteOptions = [
  { label: "是", value: "是" },
  { label: "否", value: "否" },
];
const jointConditionOptions = [
  { label: "有", value: "有" },
  { label: "无", value: "无" },
];
const conclusionOptions = [
  { label: "合格", value: "合格" },
  { label: "不合格", value: "不合格" },
];
// 状态映射
const getStatusType = (status: number) => {
  switch (status) {
    case 0:
      return "warning"; // 待巡检
      return "warning";
    case 1:
      return "danger"; // 已驳回
      return "danger";
    case 2:
      return "info"; // 待审核
      return "info";
    case 3:
      return "success"; // 通过
      return "success";
    default:
      return "info";
  }
};

// 状态文本映射
const getStatusText = (status: number) => {
  switch (status) {
    case 0:
@@ -222,25 +412,16 @@
  }
};

// 获取外观文本
const getAppearanceText = (appearance: string[]) => {
  if (!appearance || appearance.length === 0) return "-";
  return appearance.join("、");
// 格式化工具
const formatProductAppearance = (productAppearance: string) => {
  return !productAppearance ? "-" : productAppearance;
};

// 格式化产品外观显示
const formatProductAppearance = (productAppearance: string[]) => {
  if (!productAppearance || productAppearance.length === 0) return "-";
  return productAppearance.join("、");
};

// 格式化数值显示
const formatValue = (value: any, unit?: string) => {
  if (value === null || value === undefined || value === "") return "-";
  return unit ? `${value}${unit}` : value;
};

// 格式化日期显示
const formatDate = (date: string) => {
  if (!date) return "-";
  return new Date(date).toLocaleDateString("zh-CN", {
@@ -250,32 +431,145 @@
  });
};

// 格式化结构值显示
const formatStructureValue = (value1: any, value2: any) => {
  const val1 = value1 || "-";
  const val2 = value2 ? `${value2}mm` : "-";
  return { count: val1, diameter: val2 };
// 初始化表单
const initFormData = () => {
  const inspectionResult = detailData.value.inspectionResult || {};
  const processInspectionResult = detailData.value.processInspectionResult || {};
  formData.dia = inspectionResult.dia || "";
  formData.maxDia = inspectionResult.maxDia || "";
  formData.minDia = inspectionResult.minDia || "";
  formData.appearance = inspectionResult.appearance || "";
  formData.windingTightness = inspectionResult.windingTightness || "";
  formData.arrangementNeatness = inspectionResult.arrangementNeatness || "";
  formData.aluminumWireDistance = inspectionResult.aluminumWireDistance || "";
  formData.jointCondition = inspectionResult.jointCondition || "";
  formData.conclusion = inspectionResult.conclusion || "";
  formData.isFully = processInspectionResult.isFully ? "是" : "否";
};

// 获取详情
const getDetailData = async (id: string, deviceType: string) => {
  try {
    let response;
    // 获取拉丝单个结构
    response = await RoutingInspectionApi.getDrawInspectInfoById({
      id: id,
    });
    const response = await RoutingInspectionApi.getDrawInspectInfoById({ id });
    detailData.value = response.data;
    console.log(detailData.value);
    tempFiles.value = [];
    initFormData();
  } catch (error) {
    console.error("获取详情失败:", error);
  }
};

// 页面加载
onLoad((options: any) => {
  paramsId.value = options.id;
  getDetailData(options.id, options.deviceType);
});

// 编辑切换
const editList = () => {
  isEdit.value = true;
};

// 取消编辑
const close = () => {
  isEdit.value = false;
  tempFiles.value = [];
  initFormData();
};

// 保存编辑
const saveList = async () => {
  // 校验
  if (!formData.maxDia) return uni.showToast({ title: "最大直径为必填项", icon: "none" });
  if (!formData.minDia) return uni.showToast({ title: "最小直径为必填项", icon: "none" });
  if (!formData.appearance) return uni.showToast({ title: "外观为必填项", icon: "none" });
  if (!formData.windingTightness) return uni.showToast({ title: "卷绕紧密为必填项", icon: "none" });
  if (!formData.arrangementNeatness)
    return uni.showToast({ title: "排列整齐为必填项", icon: "none" });
  if (!formData.aluminumWireDistance)
    return uni.showToast({ title: "外层铝线离侧板边缘距离为必填项", icon: "none" });
  if (!formData.jointCondition)
    return uni.showToast({ title: "成品模后接头情况为必填项", icon: "none" });
  if (!formData.conclusion) return uni.showToast({ title: "结论为必填项", icon: "none" });
  if (!formData.isFully) return uni.showToast({ title: "铝杆样品是否齐全为必填项", icon: "none" });
  if (!deviceUid.value) return uni.showToast({ title: "请扫描二维码", icon: "none" });
  // 提交
  try {
    const res = await RoutingInspectionApi.drawPatrolCheckInspection({
      deviceUid: deviceUid.value,
      id: paramsId.value,
      result: {
        dia: formData.dia,
        maxDia: formData.maxDia,
        minDia: formData.minDia,
        appearance: formData.appearance,
        windingTightness: formData.windingTightness,
        arrangementNeatness: formData.arrangementNeatness,
        aluminumWireDistance: formData.aluminumWireDistance,
        jointCondition: formData.jointCondition,
        conclusion: formData.conclusion,
      },
      inspectionResult: { isFully: formData.isFully },
      processInspectionAttachmentList: tempFiles.value.map((f) => f.url),
    });
    if (res.code === 200) {
      uni.showToast({ title: "保存成功", icon: "success" });
      isEdit.value = false;
      getDetailData(paramsId.value, detailData.value.deviceType);
    } else {
      uni.showModal({ title: res.msg || "保存失败", icon: "error" });
    }
  } catch (e) {
    console.error("保存失败:", e);
    uni.showModal({ title: e.message || "保存失败", icon: "error" });
  }
};

// 附件上传校验
const beforeUpload = (file: any) => {
  const maxSize = 2 * 1024 * 1024;
  if (file.size > maxSize) {
    uni.showToast({ title: "图片大小不能超过2M", icon: "none" });
    return false;
  }
  return true;
};

// 附件上传成功
const handleUploadSuccess = (res: any) => {
  if (Array.isArray(res)) {
    tempFiles.value = [
      ...tempFiles.value,
      ...res.map((file) => ({
        ...file,
        id: `temp-${Date.now()}-${Math.random().toString(36).substr(2, 9)}`,
      })),
    ];
  } else {
    tempFiles.value.push({
      ...res,
      id: `temp-${Date.now()}-${Math.random().toString(36).substr(2, 9)}`,
    });
  }
};

// 附件上传失败
const handleUploadFail = (err: any) => {
  uni.showToast({ title: "附件上传失败", icon: "error" });
};

// 删除附件
const deleteFile = (index: number) => {
  if (index >= detailData.value.files.length) {
    tempFiles.value = tempFiles.value.filter(
      (_, idx) => idx !== index - detailData.value.files.length
    );
  } else {
    detailData.value.files = detailData.value.files.filter((_, idx) => idx !== index);
  }
};

// 图片预览
const previewImage = (url: string) => {
  previewImageUrl.value = url;
  show.value = true;
@@ -285,54 +579,82 @@
  show.value = false;
};

// 编辑列表
const editList = () => {};

// 关闭
const close = () => {};

// 保存列表
const saveList = async () => {
  // try {
  //   let response;
  //   // 保存列表
  //   response = await RoutingInspectionApi.saveStrandedInspectionStructureInfo({
  //     id: paramsId.value,
  //     structureInfo: recordData.value.structureInfo,
  //   });
  //   if (response.code === 200) {
  //     uni.showToast({
  //       title: "保存成功",
  //       icon: "success",
  //     });
  //     // 刷新详情数据
  //     getDetailData(paramsId.value, recordData.value.deviceType);
  //   } else {
  //     uni.showToast({
  //       title: response.msg || "保存失败",
  //       icon: "error",
  //     });
  //   }
  // } catch (error) {
  //   console.error("保存列表失败:", error);
  //   uni.showToast({
  //     title: "保存失败",
  //     icon: "error",
  //   });
  // }
const openScan = () => {
  scanRef.value.triggerScan();
};
</script>
<style lang="scss" scoped>
.list {
  height: calc(100vh - 80px);
  padding: 12px;
  background: #f3f9f8;

  :deep() {
    .round {
      border-radius: 4px;
    }
const getScanCode = (params: any) => {
  console.log("完整参数：", params);
  let codeObj = {};
  try {
    codeObj = JSON.parse(params.code);
  } catch (err) {
    console.error("JSON解析失败：", err);
    toast.error("扫码数据异常");
    return; // 解析失败直接返回，避免后续错误
  }
  deviceUid.value = codeObj?.uid;
  toast.success("扫码成功");
};
// 确保先移除再添加监听
const setupScanListener = () => {
  uni.$off("scan", getScanCode); // 先移除旧的
  uni.$on("scan", getScanCode); // 再添加新的
};
onUnmounted(() => {
  // 开启广播监听事件
  uni.$off("scan", getScanCode);
  console.log("离开1");
});
onMounted(() => {
  // 开启广播监听事件
  setupScanListener();
  console.log("显示1");
});
</script>

<style lang="scss" scoped>
.fixed-header {
  position: fixed;
  top: 44;
  left: 0;
  right: 0;
  background: #f3f9f8;
  z-index: 999;
  padding: 12px;
  box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
  min-height: 60px;
  box-sizing: border-box;
  overflow: visible;
}

.header-container {
  display: flex;
  align-items: center;
  width: 100%;
  gap: 10px;
}

.placeholder {
  flex: 1;
}

.scan-wrapper {
  width: 38px;
  height: 38px;
  display: flex;
  align-items: center;
  justify-content: center;
  padding: 6px;
  flex-shrink: 0;
}

.list {
  padding: 12px;
  padding-top: 84px;
  background: #f3f9f8;
  min-height: 100vh;
  box-sizing: border-box;
  overflow-y: auto;
}

.title {
@@ -361,22 +683,79 @@
.attachment-grid {
  display: flex;
  flex-wrap: wrap;
  /* 超出自动换行 */
  gap: 10px;
  /* 图片之间的间距 */
  padding: 10px 0;
}

.attachment-item {
  width: calc(25% - 10px);
  /* 每行4张，间距由gap控制，需计算宽度 */
  box-sizing: border-box;
  position: relative;
}

.upload-btn {
  width: 80px;
  height: 80px;
  display: flex;
  align-items: center;
  justify-content: center;
  border: 1px dashed #ccc;
  border-radius: 4px;
  box-sizing: border-box;
}

/* 适配小屏幕，可调整每行数量（如每行2张） */
.upload-icon {
  font-size: 32px;
  color: #0d867f;
}

.delete-icon {
  position: absolute;
  top: -8px;
  right: -8px;
  width: 24px;
  height: 24px;
  background-color: rgba(255, 0, 0, 0.8);
  color: white;
  border-radius: 50%;
  display: flex;
  align-items: center;
  justify-content: center;
  z-index: 10;
}

@media (max-width: 768px) {
  .attachment-item {
    width: calc(25% - 10px);
    margin: 10;
  }
}

:deep(.wd-form-item) {
  margin-bottom: 8rpx;
}

:deep(.wd-input, .wd-select, .wd-radio-group, .wd-checkbox-group) {
  width: 100%;
  box-sizing: border-box;
}

:deep(.wd-form-item__label)::after {
  content: "*";
  color: red;
  margin-left: 4rpx;
}

:deep(.wd-select) {
  width: 100%;
}

:deep(.wd-checkbox) {
  margin-right: 0;
}
.conclusion-radio-group {
  display: flex;
  align-items: flex-start; // 垂直方向顶部对齐（上移关键）
  gap: 20rpx; // 选项之间的间距
}
</style>

 src/pages/routingInspection/product_card/index.vue

@@ -121,12 +121,12 @@
        </view>
      </wd-col>
      <wd-col :span="8">
        <view class="flex">
        <view class="flex" @click.stop>
          <wd-button
            v-if="data[map.status] == 1"
            size="small"
            type="primary"
            @click.stop="showRejectPopup = true"
            @click="showRejectPopup = true"
            style="margin-left: auto"
          >
            查看驳回信息